Date: Tue, 18 Jan 2011 11:58:23 +0100 From: "C. P. Ghost" <cpghost@cordula.ws> To: pyunyh@gmail.com Cc: freebsd-stable@freebsd.org Subject: Re: sis(4) broken on 8.2 [Re: Carp seems completely broken on 8.2-RC2 and 8.2-PRERELEASE] Message-ID: <AANLkTik0Jm4bCWLacjP7HDO0XfXceztXBSoGUUJKTvft@mail.gmail.com> In-Reply-To: <20110117212947.GA1210@michelle.cdnetworks.com> References: <20110116124122.GA63358@psconsult.nl> <20110117195615.GA18423@psconsult.nl> <20110117212947.GA1210@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jan 17, 2011 at 10:29 PM, Pyun YongHyeon <pyunyh@gmail.com> wrote: >> Since Soekris hardware (net45xx, net48xx, lan16xx) is quite popular for >> firewalls and carp is quite often used together with this hardware, this >> looks like a showstopper for 8.2 :-( > > Since you didn't post dmesg output I'm not sure what kind of > controller you have but I guess it would be NS8381[56]. I > overhauled sis(4) to make it work on all architectures so one of > change, probably r212119, could be cause of the issue. Due to lack > of SiS controllers I didn't touch multicast handling part so some > part of code still relies on old wrong behavior of driver. Hi, I didn't upgrade my net4801s recently, but here's the relevant dmesg parts, just in case you nee them: sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:00:24:XX:XX:XX sis0: [ITHREAD] sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0 sis1: Silicon Revision: DP83816A miibus1: <MII bus> on sis1 nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1 nsphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: Ethernet address: 00:00:24:XX:XX:XX sis1: [ITHREAD] sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0 sis2: Silicon Revision: DP83816A miibus2: <MII bus> on sis2 nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2 nsphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: Ethernet address: 00:00:24:XX:XX:XX sis2: [ITHREAD] -cpghost. -- Cordula's Web. http://www.cordula.ws/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTik0Jm4bCWLacjP7HDO0XfXceztXBSoGUUJKTvft>