Date: Thu, 10 Sep 2015 10:12:20 +0100 From: Karl Pielorz <kpielorz_lst@tdx.co.uk> To: freebsd-usb@freebsd.org Subject: Subject: Intel NUC 5i3RYK USB3 support? Message-ID: <56EA08629118B42330317A52@[10.12.30.106]>
next in thread | raw e-mail | index | archive | help
Hi, I recently bought a NUC 5i3RYK, flashed it to the latest BIOS (8/18/2015 - 0350) and installed FreeBSD 10.2 on it. It seems to work OK - but there's no USB3 support (Ok, the USB3 controller is detected - but everything connected runs at USB2). This seems to have happened before, e.g. https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=186811 Is this (hopefully) just another matter of covering a different PCI device ID again? dmesg shows, usbus0 on xhci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 but then attaching a USB3 drive gives, da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <Seagate Expansion Desk 0739> Fixed Direct Access SPC-4 SCSI device da0: Serial Number NA4NAX3P da0: 40.000MB/s transfers da0: 4769307MB (1220942645 4096 byte sectors: 255H 63S/T 76000C) da0: quirks=0x2<NO_6_BYTE> pciconf -v for the USB controllers shows: xhci0@pci0:0:20:0: class=0x0c0330 card=0x20578086 chip=0x9cb18086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB ... ehci0@pci0:0:29:0: class=0x0c0320 card=0x20578086 chip=0x9ca68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB -Karl
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56EA08629118B42330317A52>