Date: Thu, 14 Jan 2010 01:40:05 GMT From: Floris Bos <info@je-eigen-domein.nl> To: freebsd-net@FreeBSD.org Subject: Re: kern/92090: [bge] bge: watchdog timeout -- resetting Message-ID: <201001140140.o0E1e5hr072464@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/92090; it has been noted by GNATS. From: Floris Bos <info@je-eigen-domein.nl> To: bug-followup@freebsd.org Cc: Subject: Re: kern/92090: [bge] bge: watchdog timeout -- resetting Date: Thu, 14 Jan 2010 02:14:07 +0100 This might be a different problem, but I add it to this bug as I am getting the same error message. I have a brand new HP DL120 G6 server which has an on-board NIC that is based on the BCM5723 chipset. The NIC is not supported/recognized by FreeBSD 8, but the FreeBSD 9 (January snapshot) identifies it as: == bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32 == After boot, the network works for about 5 seconds, barely enough time to get an IP by DHCP, and sent a ping or 2. Then network connectivity goes down, and after some time there is a "bge0: watchdog timeout -- resetting" message. Then network works again for 5 seconds, and goes down again. All the time, repeatedly. The system works fine under Ubuntu. So I assume the hardware is ok. Yours sincerley, Floris Bos
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001140140.o0E1e5hr072464>