Date: Thu, 30 May 2002 14:53:53 -0700 From: "Aaron Burke" <aburke@nullplusone.com> To: "FreeBSD-Questions" <freebsd-questions@freebsd.org>, "Joseph Maxwell" <jemaxwell@jaymax.com> Cc: <Aaron@jaymax.com> Subject: RE: questions-digest V5 #1337 (was: Addition of large hard disk) Message-ID: <NGBBLCIHCLNJAIGIFFHJMEOPCDAA.aburke@nullplusone.com> In-Reply-To: <3CF647E1.F283C34@jaymax.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Can you paste the output of dmesg into this email. I would like to take a look at it. > -----Original Message----- > From: Joseph Maxwell [mailto:jemaxwell@jaymax.com] > Sent: Thursday, May 30, 2002 08:40 AM > To: Aaron@jaymax.com; Aaron@famine.e-raist.com; > "Bur"@famine.e-raist.com; "; questions@FreeBSD.ORG > Cc: freebsd-questions-digest@FreeBSD.ORG > Subject: Re: questions-digest V5 #1337 > > > Thanks for your reply Aaron, > > Therein lies the problem, dmesg shows several pci0: entries > followed by rather cryptic comments. Mainly, <unknown card> > (vendor="a hexadecimal code", dev="another hexadecimal code") at > 9|8|12 irq 11|5|11 > There are others pcib0, pci1 but these have identifying vendors & dev > So I am not sure if the kernel is seeing the adapter, but it is > definitely not seeing the drive. I was therefore trying to > determine if I was dealing with a PCI adapter or a partition size problem. > > --- Joe --- > > questions-digest wrote: > > > > > ------------------------------ > > > > Date: Wed, 29 May 2002 19:02:55 -0700 > > From: "Aaron Burke" <aburke@nullplusone.com> > > Subject: RE: Addition of large hard disk > > > > Does dmesg show your Maxtor Ultra ATA PCI adapter? If the kernel doesnt > > know what it is, you wont have any luck getting a drive to work on it. > > > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of > Joseph Maxwell > > > Sent: Wednesday, May 29, 2002 06:39 PM > > > To: questions@FreeBSD.ORG > > > Subject: Addition of large hard disk > > > > > > > > > Hello, > > > > > > Running 4.2, adding hard drive, MAXTOR 80 Gb, IDEA/ATA Interface w/ > > > Maxtor Ultra ATA PCI adapter; CPU - AMD K7 900Mhz processor on an AGP > > > Motherboard. BIOS recognizes drive but on loading FreeBSD, > drive is not > > > > > > seen. Is this a kernel problem requiring a rebuild? > > > > > > Or is there a limit to the newfs that can be created on a disk? > > > > > > Thanks > > > > > > -- Joe -- > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > -- > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NGBBLCIHCLNJAIGIFFHJMEOPCDAA.aburke>