Date: Wed, 7 Mar 2001 15:56:37 -0600 (CST) From: Nick Rogness <nick@rogness.net> To: Peter Brezny <peter@black.purplecat.net> Cc: freebsd-net@FreeBSD.ORG Subject: Re: natd - static nat on multiple aliased ip's Message-ID: <Pine.BSF.4.21.0103071553430.28912-100000@cody.jharris.com> In-Reply-To: <Pine.BSF.4.21.0103071440150.20531-100000@cody.jharris.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 7 Mar 2001, Nick Rogness wrote: ACK! Read your message wrong...let me clarify. > On Wed, 7 Mar 2001, Peter Brezny wrote: > > > > > Let's say I had two internal subnets that i'd like to nat with different > > external ip's, while also doing static nat on one of each of the internal > > ip's. Could i do that by doing something like thils: > > > > rc.conf > > natd_flags="-f /etc/natd.conf1" > > natd_flags="-f /etc/natd.conf2" > > > Only the second line above will get executed. > Run the 2nd natd in /etc/rc.local. > > > > rc.firewall > > $fwcmd add divert 8668 all from 10.1.1.1/24 to any via $oif > > $fwcmd add divert 8669 all from 10.1.2.1/24 to any via $oif > > > > The second rule will never get hit because the packets will only > get divert through the first divert rule. > This was wrong. I didn't note the "2" in 10.1.2.1! Yes this setup is fine. > > natd.conf1 > > port 8668 > > interface fxp0 > > dynamic yes > > alias_address external_ip_1 > > redirect_address 10.1.1.4 external_ip_1 > > > > natd.conf2 > > port 8668 > > interface fxp0 > > dynamic yes > > alias_address external_ip_2 > > redirect_address 10.1.2.4 external_ip_2 > > > > The port statement on the second set is the same as the > first. The above configs look OK...sorry for the confusion. Nick Rogness <nick@rogness.net> - Keep on routing in a Free World... "FreeBSD: The Power to Serve!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0103071553430.28912-100000>