Date: Thu, 31 Jan 2002 14:32:57 +0100 (CET) From: BOUWSMA Beery <freebsd-user@dcf77-zeit.netscum.dyndns.dk> To: questions@freebsd.org, hackers@freebsd.org Cc: "Brian T.Schellenberger" <bts@babbleon.org> Subject: Re: Again Softupdates on 4.5 Message-ID: <200201311332.g0VDWvb01491@beerswilling.netscum.dyndns.dk> References: <20020130193145.5ED395D0B@ptavv.es.net> <20020131021257.193F44078@i8k.babbleon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Moin, moin!
%s wrote on %.3s, %lld Sep 1993
> > > Does 4.5 also leave write-caching on by default? If so, I think that's a
> > > terrible mistake. Would I be correct in assuming it's way to late to get
> > > this reconsidered?
> >
> > Yes, write-cache is enabled by default on 4.5 (as it was on 4.4).
> >
> > The debate on this has been long and often mis-informed. There is a
> > real risk of metadata corruption with write caching and softupdates,
> > but it appears to be EXTREMELY small. So far no case of it has
> > actually been confirmed. There is a significant chance of data loss in
> > recently updated files with write-cache, but that is also true without
> > softupdates. The only totally safe way to deal with this is to run fully
> > synchronous with write-cache disabled.
> My experience is that combining the two of them greatly magnifies the risk of
> losing recent updates, and that in fact data can be lost even without any
> system crash or other problems when using them together. Indeed, I have a
> very reproducable case of this on my system--
> If I enabled softupdates + write cache and then I do
> cd /some-big-directory
> rm -r *
> shutdown -p now
> then the file system will be corrupted on reboot.
> I find this as default behavior pretty ridiculous, and it it comes about
> *only* as result of having both enabled together.
And, I'm just guessing here, only because the delay before poweroff
isn't quite enough for the disk's write cache to drain. Just like
if you were to yank out the power cord after giving the `shutdown -p'
(poweroff) command.
If you look at the source in /usr/src/sys/kern/kern_shutdown.c you'll
see the following:
/*
* Support for poweroff delay.
*/
#ifndef POWEROFF_DELAY
# define POWEROFF_DELAY 5000
#endif
static int poweroff_delay = POWEROFF_DELAY;
SYSCTL_INT(_kern_shutdown, OID_AUTO, poweroff_delay, CTLFLAG_RW,
&poweroff_delay, 0, "");
static void
poweroff_wait(void *junk, int howto)
{
if(!(howto & RB_POWEROFF) || poweroff_delay <= 0)
return;
DELAY(poweroff_delay * 1000);
}
And you'll see a commit log message:
| @Change the default poweroff delay from 0 to 5 seconds. This seems to be
| adequate for the IDE disks that I have available for testing. Most seem
| to wait between 1 and 3 seconds before flushing their caches.
|
| Add the ability to override the delay at compile time via the
| undocumented option POWEROFF_DELAY. The delay can still be set via
| sysctl as it was originally implemented.
It sounds as if the default five seconds isn't always enough time for
your disk to do its job. (I've only done poweroff on an idle system so
I haven't run into such a problem myself.)
I don't see it would hurt anything for this default to be increased to
help out this problem. But what value would be good?
As shown in the k0deZ plus the note, there's the sysctl tunable
kern.shutdown.poweroff_delay: 5000
Perhaps if you were to bump this up to 10000 (ten seconds) and then
do your test, you wouldn't see this problem. Perhaps it would need to
be higher; maybe something between five and ten seconds would suffice.
Could you try testing this out with your particular hardware, for which
five seconds isn't enough with your test, and see if it helps? If it
does, then there would be good cause to bump up the delay for safety.
If not, then it looks like the disk activity I see some number of
seconds after such an `rm' doesn't get forced by the shutdown process,
which I hope wouldn't be the case.
I'm sure we'd all be happy to hear how things work, since not all the
possible hardware combinations can be tested, and assumptions such as
were made when selecting the value above may later become obsolete.
As another possibility, the runtime value of the poweroff delay that
is used could remain the default 5 sec if caching is disabled, or
less (whatever works and is safe), and higher (some multiple of 5?)
if caching is enabled, or if the kernel could tell there's a lot of
data to be dumped to disk. Not that I'd know if it's possible...
Just thoughts, feel free to flame
barry bouwsma, netscum
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200201311332.g0VDWvb01491>