Date: Tue, 14 Jun 2011 16:55:05 +1000 From: Da Rock <freebsd-bluetooth@herveybayaustralia.com.au> To: Maksim Yevmenkin <maksim.yevmenkin@gmail.com> Cc: bluetooth@freebsd.org Subject: Re: Asus bluetooth device - 0x1712 Message-ID: <4DF705C9.7020606@herveybayaustralia.com.au> In-Reply-To: <BANLkTikGH9nsqgj_ELOM=PakD=4_h-C4Yw@mail.gmail.com> References: <4DF46049.6080206@herveybayaustralia.com.au> <alpine.NEB.2.00.1106120817050.472@galant.ukfsn.org> <4DF53A6F.9080701@herveybayaustralia.com.au> <alpine.NEB.2.00.1106130738010.14646@galant.ukfsn.org> <BANLkTikGH9nsqgj_ELOM=PakD=4_h-C4Yw@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
On 06/14/11 05:27, Maksim Yevmenkin wrote: > On Sun, Jun 12, 2011 at 11:48 PM, Iain Hibbert<plunky@rya-online.net> wrote: > >> On Mon, 13 Jun 2011, Da Rock wrote: >> >> >>> On 06/12/11 17:30, Iain Hibbert wrote: >>> >>>> On Sun, 12 Jun 2011, Da Rock wrote: >>>> >>>>> Trying to get this device to work on my laptop (after some time of neglect >>>>> - >>>>> I've had no use or time to look into it as yet), but none of the drivers >>>>> seem >>>>> to be working. I've even tried the atheros driver by Rusty which doesn't >>>>> appear to be the same device anyway. >>>>> >>>>> Under usbconfig I get: >>>>> <vendor 0x0b05 product 0x1712, class 224/1, rev 2.00/19.15, addr 2> on >>>>> usbus5 >>>>> >>>>> Any ideas? >>>>> >>>> class 224/1 is wireless/rf, is there a way to check the device protocol? >>>> it should be 1 (bluetooth) for the ubt driver to match.. >>>> >>> How do I find that out? Isn't it the rev number there? Or do I need to run a >>> command to find that out? I can't physically look at the device as its built >>> into the laptop board. >>> >> No, the rev number is the USB device rev number and AFAIK has no relevance >> to anything.. >> >> usbconfig(8) manpage seems to be a bit sparse, you might have to check the >> source for tips as to what it can print out.. >> >> if the device is built in, is there some way of disabling it? (my laptop >> has a disable wireless switch, and also a disable bluetooth method.. mind >> you, both of them cause the usb device to disappear entirely) >> No. Its builtin and the only switch is for the wifi. > first, question: did you load ng_ubt(4) driver? > Naturally. Its in the handbook, and you never discount the handbook :) > if you did and device is still not recognized, could you please dump > device descriptor, i.e. use usbconfig(8) dump_device_desc command > ugen5.2: <product 0x1712 vendor 0x0b05> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00e0 bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x0b05 idProduct = 0x1712 bcdDevice = 0x1915 iManufacturer = 0x0000 <no string> iProduct = 0x0000 <no string> iSerialNumber = 0x0003 <0194E8-5B-0002> bNumConfigurations = 0x0001 > >>>>> Also, what is the state of bluetooth 2.x? Everything I've read has only >>>>> mentioned 1.1. >>>>> >>>> 4.0, 3.0& 2.x spec are all mostly backwards compatible (there are very >>>> few deprecations) and the FreeBSD stack should continue to work on all >>>> modern devices, albeit without advanced features.. >>>> >>>> >>> Ok, I get that people are busy working on other (possibly) more important >>> things, but what is required to get the advanced features working? Where can I >>> find out the current status of these projects and how to help? >>> >> here :) >> Good to know. I've been following the list for a while, just not actively. I thought there might be project pages or something to read... >> >>> I'm currently learning about this technology (I know, late bloomer and all... >>> :) ) and its various features- which are why I'm looking carefully at it now >>> for my current needs. Unfortunately its the advanced features which I really >>> need :( So if I can help advance things I will. >>> >> what advanced features do you need? >> I'm a little new to jargon, but the features are stereo audio, better bitrates, remote control, phone control, etc (HSP, EDR, AV-something or rather I think at least). Basically all the cool media stuff available now that wasn't around with 1.x. Thats what has grabbed my interest now anyway, file transfer, dun... meh- I can do that with wifi. > thanks, Iain :) > Iain, as to your previous post I thought I had recognized your name on the list of other BSD flavours... :) > max > Thanks Max. What now? Can I add the product ID to the ng_ubt driver and it just work? If so, any chance you could clarify the right way to do that- I'm still a little green with coding for BSD :) (and once I have done that and it works I'll swing it by you to check it out and commit even if you don't mind). Cheershome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DF705C9.7020606>