Date: Fri, 13 Mar 1998 14:29:02 -0600 (CST) From: Mark Tinguely <tinguely@plains.NoDak.edu> To: freebsd-multimedia@FreeBSD.ORG Subject: SB AWE64 GOLD Message-ID: <199803132029.OAA06502@plains.NoDak.edu>
next in thread | raw e-mail | index | archive | help
I have been trying to get a SoundBlaster AWE 64 to be configured under FreeBSD 2.2.5-RELEASE. I first tried the VOXWARE + AWEDRV from http://multiverse.com/~rhh/awedrv and I can find the AWE, but the SoundBlaster 16 part of the card is not found (see below). /sys/i386/conf/config_file controller pnp0 controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device awe0 at isa? port 0x620 pnpinfo: Checking for Plug-n-Play devices... Trying Read_Port at 203 Card assigned CSN #1 Board Vendor ID: CTL009e Board Serial Number: 05cd5ff3 PnP Version: 1.0 Vendor Version: 32 Device Description: Creative SB AWE64 Gold Logical Device ID: CTL0044 (44008c0e) Device Description: Audio Start Dependent Function Good Configuration IRQ: 5 DMA: 0 1 DMA: 8-bit only DMA: Device is not a bus master DMA: May execute in count by byte mode DMA: May not execute in count by word mode DMA: Compatibility mode DMA: 5 DMA: 16-bit only DMA: Device is not a bus master DMA: May not execute in count by byte mode DMA: May execute in count by word mode DMA: Compatibility mode Device decodes the full 16-bit ISA address I/O Range maximum address: 0x220 I/O Range maximum address: 0x220 I/O alignment for minimum: 1 I/O length: 16 Device decodes the full 16-bit ISA address I/O Range maximum address: 0x330 I/O Range maximum address: 0x330 I/O alignment for minimum: 1 I/O length: 2 Device decodes the full 16-bit ISA address I/O Range maximum address: 0x388 I/O Range maximum address: 0x388 I/O alignment for minimum: 1 I/O length: 4 (other configurations removed to save space) End Tag # dmesg sb0 not found at 0x220 sbxvi0 not found sbmidi0 not found at 0x330 opl0 not found at 0x388 awe0 at 0x620 on isa awe0: <SoundBlaster EMU8000 MIDI (RAM512k)> Sequencer busy PCM device 0 not installed. # cat /dev/sndstat VoxWare Sound Driver:3.0-beta-950506 (Sun Feb 5 14:38:12 EST 1995 freebsd-hackers@freefall.cdrom.com) Config options: ffffffff Installed drivers: Type 1: OPL-2/OPL-3 FM Type 2: SoundBlaster Type 6: SoundBlaster16 Type 20: AWE32 Synth Type 7: SB16 MIDI Card config: (SoundBlaster at 0x220 irq 5 drq 1) (SoundBlaster16 at 0x0 irq 65535 drq 5) (SB16 MIDI at 0x330 irq 65535 drq 4294967295) AWE32 Synth at 0x620 irq 65535 drq 4294967295 (OPL-2/OPL-3 FM at 0x388 irq 65535 drq 4294967295) Audio devices: Synth devices: 0: AWE32-0.4.2c (RAM512k) Midi devices: Timers: 0: System Timer Mixers: 0: AWE32 Equalizer I also tried the Luigi drivers and it gives me a (PNP) error: Probing for PnP devices: CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x05cd5ff3 This is a SB16 PnP, but LDN 0 is disabled /sys/i386/conf/config_file controller pnp0 device pcm0 at isa ? port? tty irq 5 drq 1 flags 0x15 vector pcmintr The PNP entry in the BIOS for this card is Auto. Windows95 does use the above IRQs, DRQs, and ports. I hate SoundBlasters ... --mark. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803132029.OAA06502>