Date: Thu, 4 Dec 2003 17:47:05 -0800 (PST) From: Doug White <dwhite@gumbysoft.com> To: Wesley Morgan <morganw@chemikals.org> Cc: current@freebsd.org Subject: Re: kernel hangs during boot Message-ID: <20031204171445.P78953@carver.gumbysoft.com> In-Reply-To: <20031204165637.H76565@volatile.chemikals.org> References: <20031204165637.H76565@volatile.chemikals.org>
next in thread | previous in thread | raw e-mail | index | archive | help
If you can break into ddb ok, grab the trace if its interesting. I'm curious if its jamming in something storage-related. On Thu, 4 Dec 2003, Wesley Morgan wrote: > Just tried to boot a new kernel on my laptop since the ACPI code was > modular and OHCI was finally fixed, and instead of booting it hangs > right after (or during?) the ATA probe: > > ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin > ata0-master: setting PIO4 on AcerLabs Aladdin chip > ata0-master: setting UDMA66 on AcerLabs Aladdin chip > GEOM: create disk ad0 dp=0xc427ab60 > ad0: <TOSHIBA MK3017GAP/A0.10 H> ATA-5 disk at ata0-master > ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B > ad0: 16 secs/int, 1 depth queue, UDMA66 > (probe0:ata0:0:0:0): error 22 > (probe0:ata0:0:0:0): Unretryable Error > (probe1:ata0:0:1:0): error 22 > (probe1:ata0:0:1:0): Unretryable Error > ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin > ata1-master: setting PIO4 on AcerLabs Aladdin chip > acd0: <UJDA720 DVD/CDRW/1.00> CDRW drive at ata1 as master > acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: 120mm data disc > (probe1:ata1:0:1:0): error 22 > (probe1:ata1:0:1:0): Unretryable Error > (probe2:ata0:0:0:0): error 22 > (probe2:ata0:0:0:0): Unretryable Error > (probe3:ata0:0:1:0): error 22 > (probe3:ata0:0:1:0): Unretryable Error > (probe1:ata1:0:1:0): error 22 > (probe1:ata1:0:1:0): Unretryable Error > (probe0:ata1:0:0:0): Retrying Command > (probe0:ata1:0:0:0): error 22 > (probe0:ata1:0:0:0): Unretryable Error > (probe0:ata1:0:0:0): Retrying Command > (probe0:ata1:0:0:0): error 22 > (probe0:ata1:0:0:0): Unretryable Error > pass0 at ata1 bus 0 target 0 lun 0 > pass0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device > pass0: 16.000MB/s transfers > GEOM: create disk cd0 dp=0xc4271600 > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > cd0: cd present [2156415 x 2048 byte records] > acpi_cmbat1: battery initialization failed, giving up > panic: from debugger > Stack backtrace: > > > ACPI as a module doesn't seem to be the culprit, nor does atapicam or even > atapicd. Pulling out the dvd drive still hangs. My working kernel is from > Nov 18, so I'm at a loss to exactly when this problem showed up. > > > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031204171445.P78953>