Date: Thu, 28 Oct 2004 15:20:54 +0200 From: Thomas Beer <nohuman@gmail.com> To: freebsd-multimedia@freebsd.org, freebsd-questions@freebsd.org Cc: hans@stare.cz Subject: Re: snd_neomagic kldloads, then 5.2.1-p11 freezes Message-ID: <5e51d2fd0410280620606e9676@mail.gmail.com> In-Reply-To: <20041027223248.GA67950@ns.stare.cz> References: <20041027223248.GA67950@ns.stare.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
Nice, but please stop cross-posting! Cheers Thomas On Thu, 28 Oct 2004 00:32:48 +0200, Jan Stary <hans@stare.cz> wrote: > Hello, > > I am running FreeBSD 5.2.1-p11 on a Dell Latitude LS notebook. (See > KERNCONF and dmesg at the end.) Nearly everything is working fine, > except for the sound chip. > > I built the sound stuff as modules (sound/pcm + sound/driver/neomagic, > resulting in snd_pcm + snd_neomagic). > > When I try to insert the module, I get > > # kldload snd_neomagic > pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xf7800000-0xf7bfffff, irq 10, device 0.1 on pci1 > > and then the system freezes. If I compile pcm right into the kernel, the > freeze occurs during bootime with the same message. > > I also have wi0 running at irq 10 (see dmesg); when I don't use it (no > card in, no device attached to wi0, irq 10 not used by anything), the > freeze ocuurs all the same. > > Suspecting some conflict between devices using irq 10, I said > hint.pcm.0.irq="5" in /boot/device.hints (irq 5 is not used by > anything), but kldloading snd_neomagic still tries to use irq 10 > - why is that? What is the right way of telling a device which irq to > use? > > Before I even found that it is a NeoMagic, I built all the sound modules > and tried kldloading them. Some of them just loaded and nothing happened > (I probably don't have any device they could serve), some resulted in > > # kldload snd_ad1816 > sio1: configured irq 3 not in bitmap of probed irqs 0x4000 > sio1: port may not be enabled > > # kldload snd_ess > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > > # kldload snd_mss > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > > # kldload speaker > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > speaker0 port0x61 on acpi0 > > Why does kldloading a sound module have to do anything with sio1? > Where is irq 3 'configured' to be used? (by the sound module?) > > So I also disabled sio1 in device.hints (hint.sio.1.disabled="1") - there > is only one sio at the machine anyway. > > I use ACPI - does it have anything to do with my problem? > (with ACPI, devices are 'on acpi0', not on 'on isa0' etc.) > > Thanks > > Jan > > This is my KERNCONF: > > # DELL -- kernel configuration file for FreeBSD/i386 on Dell Latitude LS > > ident DELL > machine i386 > cpu I686_CPU > #options CPU_SUSP_HALT # suspend on halt > #options CPU_UPGRADE_HW_CACHE # eliminates unneeded cache flushes > #options PERFMON > > #hints "GENERIC.hints" # Default places to look for devices. > #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols > > options SCHED_ULE # ULE scheduler > > options INET # InterNETworking > options INET6 # IPv6 communications protocols > options IPSEC > options IPSEC_DEBUG > options BRIDGE > > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big directories > options MD_ROOT # MD is a potential root device > > options PROCFS # Process filesystem (requires PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > options GEOM_GPT # GUID Partition Tables. > options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > #options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI > options KTRACE # ktrace(1) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > # Bus support. Do not remove isa, even if you have no isa slots > device isa > device eisa > device pci > > # Floppy drives > #device fdc > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > options ATA_STATIC_ID # Static device numbering > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > > device vga # VGA video card driver > device agp # support several AGP chipsets > #options VESA > > device splash # Splash screen and screen saver support > device sc # syscons: the default console driver > > # Floating point support - do not disable. > device npx > > # Add suspend/resume support for the i8254. > device pmtimer > > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > device cbb # cardbus (yenta) bridge > device pccard # PC Card (16-bit) bus > device cardbus # CardBus (32-bit) bus > > # Serial (COM) ports > device sio # 8250, 16[45]50 based serial ports > > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > #device lpt # Printer > #device plip # TCP/IP over parallel > #device ppi # Parallel port interface device > > # ethernet > device miibus # MII bus support > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # Wireless NIC cards > device wlan # 802.11 support > device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. > > # Pseudo devices. > device loop # Network loopback > #device mem # Memory and kernel memory devices > #device io # I/O device > device random # Entropy device > device ether # Ethernet support > #device sl # Kernel SLIP > #device ppp # Kernel PPP > device tun # Packet tunnel. > device pty # Pseudo-ttys (telnet etc) > device md # Memory "disks" > #device gif # IPv6 and IPv4 tunneling > #device faith # IPv6-to-IPv4 relaying (translation) > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > device bpf # Berkeley packet filter > > # ipfw > options IPFIREWALL > options IPFIREWALL_VERBOSE > options IPDIVERT > options IPSTEALTH > > This is my dmesg: > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2.1-RELEASE-p11 #4: Sun Oct 24 15:28:38 CEST 2004 > root@dell:/usr/obj/usr/src/sys/DELL > Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ad000. > Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc07ad1f4. > Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07ad2a4. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07ad350. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III (398.27-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> > real memory = 134152192 (127 MB) > avail memory = 124870656 (119 MB) > Pentium Pro MTRR support enabled > VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc0758c62 (1000022) > VESA: MagicGraph 256 AV 48K > module_register_init: MOD_LOAD (splash_bmp, 0xc0750810, 0) error 2 > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <PTLTD RSDT > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 7 entries at 0xc00fdf50 > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 7 INTD is routed to irq 10 > pcib0: slot 10 INTA is routed to irq 10 > pcib0: slot 13 INTA is routed to irq 10 > pcib0: slot 16 INTA is routed to irq 3 > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib1: slot 0 INTA is routed to irq 10 > pcib1: slot 0 INTB is routed to irq 10 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci1: <multimedia, audio> at device 0.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pci0: <serial bus, USB> at device 7.2 (no driver attached) > pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) > cbb0: <TI1211 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xfc00-0xfc7f mem 0xfedfec00-0xfedfec7f irq 10 at device 13.0 on pci0 > xl0: Ethernet address: 00:b0:d0:4d:ae:31 > miibus0: <MII bus> on xl0 > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: <simple comms> at device 16.0 (no driver attached) > acpi_acad0: <AC Adapter> on acpi0 > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > ACPI-0175: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc1c33960), AE_NOT_EXIST > acpi_cmbat0: <Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node 0xc1c33800), AE_NOT_EXIST > acpi_button0: <Sleep Button> on acpi0 > ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > acpi_ec0: <Embedded Controller: GPE 0> port 0x66,0x62 on acpi0 > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC_.FDDA._STA] (Node 0xc1c2f6e0), AE_NO_HARDWARE_RESPONSE > orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xcc000-0xcc7ff,0xc0000-0xcbfff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 398271068 Hz quality 800 > Timecounters tick every 10.000 msec > ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited > IPsec: Initialized Security Association Processing. > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > wi0: < IEEE 802.11 Wireless LAN/PC Card> at port 0x100-0x13f irq 10 function 0 config 1 on pccard0 > wi0: 802.11 address: 00:60:b3:78:f2:3c > wi0: using RF:PRISM2.5 MAC:ISL3873 > wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6) > wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > GEOM: create disk ad0 dp=0xc1cad860 > ad0: 19077MB <IC25N020ATMR04-0> [38760/16/63] at ata0-master UDMA33 > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.ACAD._PSR] (Node 0xc1c33b20), AE_NO_HARDWARE_RESPONSE > Mounting root from ufs:/dev/ad0s2a > system power profile changed to 'economy' > ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC0_.SMRD] (Node 0xc1c31980), AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1.UPBS] (Node 0xc1c338e0), AE_NO_HARDWARE_RESPONSE > ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1c33920), AE_NO_HARDWARE_RESPONSE > > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5e51d2fd0410280620606e9676>