Date: Wed, 8 Oct 2025 16:13:14 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: christos@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #33 - Still Failing Message-ID: <371896625.571.1759939995009@jenkins.ci.freebsd.org> In-Reply-To: <1154531115.545.1759926122883@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #33 (44114a581fba9ffc551328e89c1db3d2588cc9fe) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/33/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/33/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/33/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 44114a581fba9ffc551328e89c1db3d2588cc9fe by christos: libsamplerate: Define as PRIVATELIB The end of the build log: [...truncated 4.39 MiB...] epair0b: Ethernet address: 26:b0:ce:3e:13:d4 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4e:63:0b:61:d6:c1 epair1b: Ethernet address: ca:e5:d1:78:b5:de epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.176s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 4a:ee:de:e9:b5:86 epair0b: Ethernet address: 3a:b7:c8:8b:5c:db epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 46:33:e7:9b:c7:25 epair1b: Ethernet address: 2a:d2:35:ad:a0:98 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.140s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 8a:6b:99:1c:bf:1e epair0b: Ethernet address: 4e:e2:f3:58:b0:c3 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: a2:fa:de:89:c7:00 epair1b: Ethernet address: d6:01:66:80:52:de epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.139s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 62:cc:d2:24:19:22 epair0b: Ethernet address: 6e:a3:4d:02:bf:b5 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 1a:b1:30:11:44:9c epair1b: Ethernet address: 4a:12:5f:4c:0d:f7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.140s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 6e:8c:d5:d6:ec:47 epair0b: Ethernet address: 72:d6:94:6c:ca:78 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: a6:ad:40:86:50:ce epair1b: Ethernet address: 02:b9:15:72:17:29 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.140s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: a2:61:02:43:41:2d epair0b: Ethernet address: 7a:11:c7:27:55:66 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 5a:35:f5:b6:44:7e epair1b: Ethernet address: 4a:32:d9:6c:82:0c epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.138s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 82:c0:52:cf:3e:fc epair0b: Ethernet address: ee:12:93:5b:17:e7 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 16:87:56:64:5e:f6 epair1b: Ethernet address: da:fa:5c:20:d7:03 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.159s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 7e:dd:a0:da:e1:30 epair0b: Ethernet address: 0e:34:53:6b:5b:b5 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:d3:10:63:b8:1d epair1b: Ethernet address: aa:96:b2:63:bd:32 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.149s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 92:55:54:ed:a2:ba epair0b: Ethernet address: 26:28:d3:9a:f6:2b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: aa:b6:e9:dd:53:e3 epair1b: Ethernet address: 92:bd:d0:40:07:ac epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 0a:d8:85:60:0c:17 epair2b: Ethernet address: e6:e4:85:84:3c:a6 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.256s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: a2:d6:f0:c6:e5:26 epair0b: Ethernet address: 4a:5a:ae:8a:f0:c6 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 26:f0:de:f9:72:f2 epair1b: Ethernet address: 9e:a5:38:8c:28:18 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: ea:3f:ab:8c:3a:29 epair2b: Ethernet address: 1e:05:76:39:09:16 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.311s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: f6:e4:fa:96:73:01 epair0b: Ethernet address: de:85:20:10:b1:3a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 32:fd:79:20:16:0c epair1b: Ethernet address: 02:79:2e:00:b1:d1 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 8a:61:b7:71:d4:56 epair2b: Ethernet address: 5e:d9:f9:94:f1:5a epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f132 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff80135c6c696 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 0 time = 1759939978 KDB: stack backtrace: #0 0xffffffff80bc033d at kdb_backtrace+0x5d #1 0xffffffff80b73726 at vpanic+0x136 #2 0xffffffff80b735e3 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051a88 at calltrap+0x8 #5 0xffffffff80d84b19 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc3438 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b94 at ip6_input+0x484 #14 0xffffffff80cc0c98 at swi_net+0x128 #15 0xffffffff80b2d359 at ithread_loop+0x239 #16 0xffffffff80b298eb at fork_exit+0x7b #17 0xffffffff81052aae at fork_trampoline+0xe Uptime: 1h43m11s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-33' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-zfs-tests.sh x ./disable-dtrace-tests.sh x ./run-kyua.sh x ./run.sh x ./disable-notyet-tests.sh x ./auto-shutdown + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins2696112926532380610.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '44114a581fba9ffc551328e89c1db3d2588cc9fe', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../44114a581fba9ffc551328e89c1db3d2588cc9fe/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?371896625.571.1759939995009>