Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 23 Jan 2005 12:11:09 +0100
From:      guzman@zalem.net
To:        freebsd-questions@freebsd.org
Subject:   problem with a camera pentax S50
Message-ID:  <20050123111109.GA19729@zalem.net>

next in thread | raw e-mail | index | archive | help
I've got a problem with a Pentax Optio S50. I can't make it work with my fbsd 5.3.
It's first announce as :
umass0: PENTAX product 0x001f, rev 1.10/0.00, addr 2
and some seconds later dmesg says the folowing several times :
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR

I can't figure what it come from, the camera work well on the same computer under XP, and well also under a fbsd 4.10 on an another computer.
I currently have both ehci and ohci in my kernel, but I've tried to separate them, and it doesn't work.

Any help would be great.

Cheers,
Guzman




here is the complete dump of my dmesg, with connecting and deconnecting the camera :

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #4: Sun Jan 23 11:35:36 CET 2005
    toor@barjack.zalem.net:/home/src/sys/i386/compile/Barjack
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2390.31-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 534708224 (509 MB)
avail memory = 517746688 (493 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 645DX host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <SiS 7012> port 0x1080-0x10ff,0x1400-0x14ff at device 2.7 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC200 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe0000000-0xe0000fff irq 5 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe0001000-0xe0001fff irq 5 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe0002000-0xe0002fff irq 5 at device 3.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0003000-0xe0003fff at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pci0: <simple comms> at device 6.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem 0xe0004000-0xe00040ff at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:ca:bd:03:1d
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 10 at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Lucent FW322/323> mem 0xe0005000-0xe0005fff at device 13.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:40:ca:01:10:01:81:0f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:ca:01:81:0f
fwe0: Ethernet address: 02:40:ca:01:81:0f
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=4, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_button0: <Power Button> on acpi0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd5fff on isa0
sc0: <System console> at flags 0x80 on isa0
sc0: VGA <16 virtual consoles, flags=0x280>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounter "TSC" frequency 2390309168 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 38154MB <HITACHI DK23DA-40/00J0A0A1> [77520/16/63] at ata0-master UDMA33
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-241/VF02> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
umass0: PENTAX product 0x001f, rev 1.10/0.00, addr 2
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: at uhub0 port 2 (addr 2) disconnected
umass0: detached


------------------------------------------------------
here is my kernel config file :

machine		i386
cpu		I686_CPU
ident		Barjack

options 	SCHED_4BSD		# 4BSD scheduler
options 	INET			# InterNETworking
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	MD_ROOT			# MD is a potential root device
options 	GEOM_GPT		# GUID Partition Tables.
options 	COMPAT_43		# Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.

device		apic		# I/O APIC

# Bus support.  Do not remove isa, even if you have no isa slots
device		isa
device		eisa
device		pci


# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)


# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver
options		VGA_WIDTH90

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc
options		SC_PIXEL_MODE

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus

# Pseudo devices.
device		loop		# Network loopback
device		mem		# Memory and kernel memory devices
#device		io		# I/O device
device		random		# Entropy device
device		ether		# Ethernet support
device		ppp		# Kernel PPP
options		PPP_BSDCOMP
options		PPP_DEFLATE
options		PPP_FILTER
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci
device		usb		# USB Bus (required)
device		umass

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050123111109.GA19729>