Date: Wed, 13 Oct 1999 11:22:46 -0500 From: Craig Jones <cmjones@smig.net> To: freebsd-isp@freebsd.org Subject: Re: wierd SCSI problems Message-ID: <3.0.6.32.19991013112246.01426b30@smig.net> In-Reply-To: <NDBBJDAGOKOGNKPLFIBPOEEOCMAA.angrick@netdirect.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I am using a Gateway2000 with the same scsi card no adapters and FreeBSD 3.2 from the CD. I have only 1 drive IBM DDRS-34560 & having the same problem. Thanks Craig Jones At 09:59 AM 10/13/99 -0500, you wrote: >I have an intermittent SCSI problem that doesn't seem to have a pattern. I'm >using 2.2.8.-RELEASE, adaptec 2940UW SCSI controller, and 2 compaq DGHS18Y >18GB SCSI drives (separate drives...no mirrors or RAID. Second drive is >mounted as /usr2). They have a 50-68 pin convertor on both of them. my >connector has 3 ends..3rd end is connected to an active terminator. > >The problem is that the system locks up and stops responding spiratically. >The longest it has run is a 7 or 8 weeks, the shortest is a couple of hours. >There seems to be no real pattern. What's strange is that it seems to work >best when its being used...when its been idle for awhile is when it seems to >lock up..Here are some of the messages that appear on the screen. Some of >these continuously scroll when its locked up: > >SCB 0x0 - times out in datain phase, SCSISIGI = 0x44 >SEQ ADDR = 0x0 SCSISEG = 0x0 SSTAT0=0x0 SSTAT1=0x0 >sd0(ahc:0:0) SCB0x0 - abort message in message buffer > >and > >sd0(ahc0:0:0) SCB 2: Yucky Immedate reset Flags=0x1 >ahc0: issued channel A Bus Reset. 2 SCBs aborted >Sending SDTR!! >sd0(ahc0:0:0):UNIT ATTENTION asc:29,0 >sd0(ahc0:0:0):Power On reset, or bus device reset occured, retries:3 > >and > >ahc0:brkadrint; Sequencer Ram Parity Error at seqaddr=0x8 > >Anyone have a clue as to what might be going on? If it was a cable issue, >you'd think that it would either work or it wouldn't..I'm at a loss. This >was going to be my main webserver. > >Andy Angrick >hostresource.com > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.6.32.19991013112246.01426b30>