Date: Tue, 1 May 2007 12:11:40 +0200 (CEST) From: Leonardo Midolo <leo_midolo@yahoo.it> To: freebsd-current@freebsd.org Subject: panic: failed to create swap_zone (SMP/i386) Message-ID: <401909.29458.qm@web27114.mail.ukl.yahoo.com>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hi I installed current (ZFS snapshot 20070415) on my laptop (core2 duo) but after some reboots I get this message: SMP: AP CPU #1 Launched! panic: failed to create swap_zone. I can boot the system using verbose mode. I recompiled the kernel without option SMP and it works fine. I found a similar problem reported here http://lists.freebsd.org/pipermail/freebsd-stable/2006-November/030682.html Any suggestion? Thanks Leonardo Midolo ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html [-- Attachment #2 --] ACPI: HPET @ 0x0x3fe73eca/0x0038 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: MCFG @ 0x0x3fe73f02/0x003C (v 1 INTEL CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: TCPA @ 0x0x3fe73f3e/0x0032 (v 1 Intel CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: APIC @ 0x0x3fe73f70/0x0068 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000) ACPI: BOOT @ 0x0x3fe73fd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) ACPI: SSDT @ 0x0x3fe6ec58/0x064F (v 1 SataRe SataPri 0x00001000 INTL 0x20050624) ACPI: SSDT @ 0x0x3fe6e5c6/0x0692 (v 1 SataRe SataSec 0x00001000 INTL 0x20050624) ACPI: SSDT @ 0x0x3fe6db8c/0x025F (v 1 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3fe6dae6/0x00A6 (v 1 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3fe6d61a/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan: <802.11 Link Layer> feeder_register: snd_unit=0 snd_maxautovchans=4 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Apr 15 2007 17:11:05) npx0: INT 16 interface acpi0: <TOSCPL Capell00> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd828b000 pa 0x9d000 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS_PRESENT call failed AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 4 dev 0 func 0 AcpiOsDerivePciId: bus 5 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 2000 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3fe6ddeb/0x04B6 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) cpu1: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3fe6e2a1/0x0085 (v 1 PmRef Cpu1Cst 0x00003000 INTL 0x20050624) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a1, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1c (7000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd2400000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d4, revid=0x02 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27d6, revid=0x02 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=7 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd2404000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c4, revid=0x02 bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x18b0, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xd0000000-0xd1ffffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0398, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd1000000, size 24, enabled pcib1: requested memory range 0xd1000000-0xd1ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type Memory, range 64, base 0xd0000000, size 24, enabled pcib1: requested memory range 0xd0000000-0xd0ffffff: good map[24]: type I/O Port, range 32, base 0x2000, size 7, enabled pcib1: requested I/O range 0x2000-0x207f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 nvidia0: <GeForce Go 7600> port 0x2000-0x207f mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd0ffffff irq 16 at device 0.0 on pci1 nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xd1000000 nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xc0000000 nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xd0000000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pcm0: <Intel 82801G High Definition Audio Controller> mem 0xd2400000-0xd2403fff irq 22 at device 27.0 on pci0 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd2400000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50 pcm0: [MPSAFE] pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0x3000-0x3fff pcib3: memory decode 0xd2100000-0xd21fffff pcib3: no prefetched decode pci4: <ACPI PCI bus> on pcib3 pci4: physical bus=4 found-> vendor=0x10ec, dev=0x8168, revid=0x01 bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled pcib3: requested I/O range 0x3000-0x30ff: in range map[18]: type Memory, range 64, base 0xd2100000, size 12, enabled pcib3: requested memory range 0xd2100000-0xd2100fff: good pcib3: matched entry for 4.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 pcib3: re0 requested I/O range 0x3000-0x30ff: in range pcib3: re0 requested I/O range 0x3000-0x30ff: in range pcib3: re0 requested I/O range 0x3000-0x30ff: in range re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xd2100000-0xd2100fff irq 18 at device 0.0 on pci4 pcib3: re0 requested I/O range 0x3000-0x30ff: in range miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:16:d4:c9:bd:ae ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 re0: [MPSAFE] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: secondary bus 5 pcib4: subordinate bus 5 pcib4: I/O decode 0x0-0x0 pcib4: no prefetched decode pci5: <ACPI PCI bus> on pcib4 pci5: physical bus=5 uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd2404000-0xd24043ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd2404000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: <vendor 0x0c45 USB20 Camera, class 0/0, rev 2.00/1.00, addr 2> on uhub4 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: secondary bus 6 pcib5: subordinate bus 7 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib5 pci6: physical bus=6 found-> vendor=0x1106, dev=0x3044, revid=0xc0 bus=6, slot=0, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfabff800, size 11, enabled pcib5: requested memory range 0xfabff800-0xfabfffff: good map[14]: type I/O Port, range 32, base 0xff80, size 7, enabled pcib5: matched entry for 6.0.INTA pcib5: slot 0 INTA hardwired to IRQ 20 found-> vendor=0x1524, dev=0x1412, revid=0x10 bus=6, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=7 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2000000, size 12, enabled pcib5: requested memory range 0xd2000000-0xd2000fff: good pcib5: matched entry for 6.4.INTA pcib5: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x1524, dev=0x0530, revid=0x01 bus=6, slot=4, func=1 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2001800, size 7, memory disabled pcib5: requested memory range 0xd2001800-0xd200187f: good pcib5: matched entry for 6.4.INTB pcib5: slot 4 INTB hardwired to IRQ 17 found-> vendor=0x1524, dev=0x0550, revid=0x01 bus=6, slot=4, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2001c00, size 8, memory disabled pcib5: requested memory range 0xd2001c00-0xd2001cff: good pcib5: matched entry for 6.4.INTB pcib5: slot 4 INTB hardwired to IRQ 17 found-> vendor=0x1524, dev=0x0551, revid=0x01 bus=6, slot=4, func=4 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 8, memory disabled fwohci0: <VIA Fire II (VT6306)> port 0xff80-0xffff mem 0xfabff800-0xfabfffff irq 20 at device 0.0 on pci6 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfabff800 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:72:93:40:05:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:40:05:10 fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:40:05:10 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) cbb0: <PCI-CardBus Bridge> mem 0xd2000000-0xd2000fff irq 16 at device 4.0 on pci6 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x14121524 0x02100007 0x06070010 0x00824008 0x10: 0xd2000000 0x020000a0 0x20070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400110 0x40: 0x002014c0 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x4060d021 0x00000000 0x00000000 0x88501212 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00000 0x00000010 0x0000000d 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00002003 0x00800080 0x10080600 0x000007fe 0xd0: 0x00e00020 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci6: <memory, flash> at device 4.1 (no driver attached) pci6: <base peripheral> at device 4.2 (no driver attached) pci6: <memory, flash> at device 4.4 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=01 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xdc000-0xdffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x8ea1 0x8ea1 0x8ea1 0x8ea1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen1: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.21, addr 2> on uhub2 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 83125714 hz Timecounter "TSC" frequency 1828765631 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached rr232x: no controller detected. acpi_acad0: acline initialization start acpi_acad0: On Linebattery0: battery initialization start acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 95396MB <SAMSUNG HM100JI YH100-19> at ata0-master SATA150 ad0: 195371568 sectors [193821C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: <TSSTcorpCD/DVDW SN-S082D/SS03> DVDR drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data/audio disc acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 GEOM_LABEL: Label for provider acd0 is iso9660/AOE. acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init WARNING: /var was not properly dismounted GEOM_LABEL: Label ntfs/Sharedata removed. re0: link state changed to UP acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 splash: image decoder found: blank_saver acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPCB.BAT1._BST] (Node 0xc4425aa0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE battery0: battery initialization failed, giving uphelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?401909.29458.qm>