Date: Sun, 1 Dec 2002 05:59:55 +0300 From: Sergey V Golitzyn <klmx@proxy.immune.isf.ru> To: freebsd-current@freebsd.org Subject: Where is APM0 ??? Message-ID: <200212010548.25022.klmx@proxy.immune.isf.ru>
next in thread | raw e-mail | index | archive | help
Hello, i have a little problem with APM (Adv. Power Managment)
I migrate from 4.7-STABLE to 5.0-CURRENT version. But in process i have l=
ost=20
apm0 device in "dmesg".
Device /dev/apm is in, but apmd daemon does not start cozz /dev/apmctl de=
vice=20
not exist.
Tell me please how to modify this strings in /boot/device hints to Enable=
APM=20
device:
=09hint.apm.0.at=3D"nexus"
=09hint.apm.0.enable=3D"1"
=09hint.apm.0.disabled=3D"0"
=09hint.apm.0.flags=3D"0x20"
Or i must use another device like VIAPM ????
KERNCONF file contains :
device apm
when i include device VIAPM, system does not booted at all.
Command zzz prints:
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
Command "shutdown -p now" going to reboot.
Dmesg file included.
Thanks, Best Regrads
Sergey V. Golitzyn (Russia)
////////////////////////////////// Dmesg file=20
////////////////////////////////////////////////////////////
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #17: Sun Dec 1 02:50:49 MSK 2002
root@serg.hihihaha.ru:/usr/obj/usr/src/sys/HIHIHAHA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0463000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04630a8.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0463154.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0463200.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04632b0.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc046335c.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0463408.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1336371473 Hz
CPU: AMD Athlon(tm) XP 1500+ (1336.37-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x662 Stepping =3D 2
=20
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xffffffffc0480000<MP,AMIE,DSP,3DNow!>
real memory =3D 268369920 (255 MB)
avail memory =3D 256053248 (244 MB)
Initializing GEOMetry subsystem
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc040dc42 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 7 entries at 0xc00fdef0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port=20
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at devic=
e 0.0=20
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
bktr0: <BrookTree 878> mem 0xe2000000-0xe2000fff irq 10 at device 9.0 on =
pci0
bktr0: AVer Media TV/FM, Philips PAL tuner.
pci0: <multimedia> at device 9.1 (no driver attached)
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 11 at device 12.0 on pci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xd800-0xd80f at device 17.1 o=
n=20
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 17=
=2E2 on=20
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 10 at device 17=
=2E3 on=20
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 17=
=2E4 on=20
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port=20
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
WARNING: apm_saver module requires apm enabled
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1612> at ata0-slave PIO4
acd1: CD-RW <CD-W540E> at ata1-master PIO4
acd2: CDROM <ASUS CD-S520/A> at ata1-slave PIO4
MBREXT Slice 5 on ad0s4:
0000 00 01 81 08 0b fe ff 8c 3f 00 00 00 06 63 55 02 |........?....cU.=
|
[0] f:00 typ:11 s(CHS):8/1/129 e(CHS):140/254/255 s:63 l:39150342
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................=
|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212010548.25022.klmx>