Date: Fri, 26 Feb 2010 13:02:55 +0100 From: Lars Balker Rasmussen <lars@balker.dk> To: Mark Linimon <linimon@lonesome.com> Cc: perl@freebsd.org Subject: Re: [ports-sparc64@FreeBSD.org: p5-Task-Weaken-1.03 failed on sparc64 7] Message-ID: <376a98e01002260402s12cb4e2aw271adc0da2bb8402@mail.gmail.com> In-Reply-To: <20100226113340.GA25066@lonesome.com> References: <20100226113340.GA25066@lonesome.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Is there a clock-problem on that machine? Writing Makefile for Task::Weaken =3D=3D=3D> Building for p5-Task-Weaken-1.03 Makefile out-of-date with respect to /usr/local/lib/perl5/5.10.1/mach/Config.pm /usr/local/lib/perl5/5.10.1/mach/CORE/config.h What's the timestamps on those files? On Fri, Feb 26, 2010 at 12:33 PM, Mark Linimon <linimon@lonesome.com> wrote= : > anyone have any idea on this one? =A0It's only failing on sparc64. > > For the correct builds, where this log ends, this one has: > > =A0Checking if your kit is complete... > =A0Looks good > =A0Writing Makefile for Task::Weaken > =A0=3D=3D=3D> =A0Building for p5-Task-Weaken-1.03 > =A0cp lib/Task/Weaken.pm blib/lib/Task/Weaken.pm > =A0Manifying blib/man3/Task::Weaken.3 > > Thanks. > > mcl > > ----- Forwarded message from User Ports-sparc64 <ports-sparc64@FreeBSD.or= g> ----- > > From: User Ports-sparc64 <ports-sparc64@FreeBSD.org> > To: linimon@FreeBSD.org > Subject: p5-Task-Weaken-1.03 failed on sparc64 7 > > You can also find this build log at > > =A0http://pointyhat.FreeBSD.org/errorlogs/sparc64-errorlogs/a.7.201002230= 33746/p5-Task-Weaken-1.03.log > > building p5-Task-Weaken-1.03 on netra6.isc.freebsd.org > in directory /disk/tmp/7/20100223033746/chroot/27169 > building for: 7.3-PRERELEASE sparc64 > maintained by: perl@FreeBSD.org > port directory: /usr/ports/devel/p5-Task-Weaken > Makefile ident: $FreeBSD: ports/devel/p5-Task-Weaken/Makefile,v 1.7 2009/= 08/16 09:21:49 linimon Exp $ > build started at Tue Feb 23 06:23:16 UTC 2010 > FETCH_DEPENDS=3D > PATCH_DEPENDS=3Dperl-5.10.1.tbz > EXTRACT_DEPENDS=3Dperl-5.10.1.tbz > BUILD_DEPENDS=3Dperl-5.10.1.tbz > RUN_DEPENDS=3Dperl-5.10.1.tbz > prefixes: LOCALBASE=3Dusr/local > add_pkg > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 1: mak= e checksum>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D> Task-Weaken-1.03.tar.gz doesn't seem to exist in /tmp/distfiles/. > =3D> Attempting to fetch from ftp://freebsd.isc.org/pub/FreeBSD/ports/dis= tfiles/. > Task-Weaken-1.03.tar.gz =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 1381 kB 1381 kBps > =3D> MD5 Checksum OK for Task-Weaken-1.03.tar.gz. > =3D> SHA256 Checksum OK for Task-Weaken-1.03.tar.gz. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 2: mak= e extract>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.10.1.tbz > adding dependencies > pkg_add perl-5.10.1.tbz > Removing stale symlinks from /usr/bin... > =A0 =A0Skipping /usr/bin/perl > =A0 =A0Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > =3D=3D=3D> =A0Extracting for p5-Task-Weaken-1.03 > =3D> MD5 Checksum OK for Task-Weaken-1.03.tar.gz. > =3D> SHA256 Checksum OK for Task-Weaken-1.03.tar.gz. > =3D=3D=3D> =A0 p5-Task-Weaken-1.03 depends on file: /usr/local/bin/perl5.= 10.1 - found > Deleting perl-5.10.1 > Removing stale symlinks from /usr/bin... > =A0 =A0Removing /usr/bin/perl > =A0 =A0Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 3: mak= e patch>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.10.1.tbz > adding dependencies > pkg_add perl-5.10.1.tbz > Removing stale symlinks from /usr/bin... > =A0 =A0Skipping /usr/bin/perl > =A0 =A0Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > =3D=3D=3D> =A0Patching for p5-Task-Weaken-1.03 > =3D=3D=3D> =A0 p5-Task-Weaken-1.03 depends on file: /usr/local/bin/perl5.= 10.1 - found > Deleting perl-5.10.1 > Removing stale symlinks from /usr/bin... > =A0 =A0Removing /usr/bin/perl > =A0 =A0Removing /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 4: mak= e build>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > add_pkg perl-5.10.1.tbz > adding dependencies > pkg_add perl-5.10.1.tbz > Removing stale symlinks from /usr/bin... > =A0 =A0Skipping /usr/bin/perl > =A0 =A0Skipping /usr/bin/perl5 > Done. > Creating various symlinks in /usr/bin... > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl > =A0 =A0Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5 > Done. > Cleaning up /etc/make.conf... Done. > Spamming /etc/make.conf... Done. > Cleaning up /etc/manpath.config... Done. > Spamming /etc/manpath.config... Done. > =3D=3D=3D> =A0 p5-Task-Weaken-1.03 depends on file: /usr/local/bin/perl5.= 10.1 - found > =3D=3D=3D> =A0Configuring for p5-Task-Weaken-1.03 > Warning: prerequisite ExtUtils::MakeMaker 6.42 not found. We have unknown= version. > Checking if your kit is complete... > Looks good > Writing Makefile for Task::Weaken > =3D=3D=3D> =A0Building for p5-Task-Weaken-1.03 > Makefile out-of-date with respect to /usr/local/lib/perl5/5.10.1/mach/Con= fig.pm /usr/local/lib/perl5/5.10.1/mach/CORE/config.h > Cleaning current config before rebuilding Makefile... > make -f Makefile.old clean > /dev/null 2>&1 > /usr/local/bin/perl5.10.1 "-Iinc" Makefile.PL "INSTALLDIRS=3Dsite" "CC=3D= cc" "CCFLAGS=3D-O2 -fno-strict-aliasing -pipe" "PREFIX=3D/usr/local" "INSTA= LLPRIVLIB=3D/usr/local/lib" "INSTALLARCHLIB=3D/usr/local/lib" > Warning: prerequisite ExtUtils::MakeMaker 6.42 not found. We have unknown= version. > Checking if your kit is complete... > Looks good > Writing Makefile for Task::Weaken > =3D=3D> Your Makefile has been rebuilt. <=3D=3D > =3D=3D> Please rerun the make command. =A0<=3D=3D > false > *** Error code 1 > > Stop in /work/a/ports/devel/p5-Task-Weaken/work/Task-Weaken-1.03. > *** Error code 1 > > Stop in /a/ports/devel/p5-Task-Weaken. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > build of /usr/ports/devel/p5-Task-Weaken ended at Tue Feb 23 06:33:50 UTC= 2010 > > > ----- End forwarded message ----- > _______________________________________________ > freebsd-perl@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-perl > To unsubscribe, send any mail to "freebsd-perl-unsubscribe@freebsd.org" > --=20 Lars Balker Rasmussen Consult::Perl
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?376a98e01002260402s12cb4e2aw271adc0da2bb8402>