Date: Mon, 2 Aug 2010 17:21:37 +0200 From: =?ISO-8859-2?B?Smn47SBLdWLt6GVr?= <jiri.kubicek@kraxnet.cz> To: freebsd-current@freebsd.org Subject: bge(4), 5714, IBM BladeCenter HS12, no carrier Message-ID: <AANLkTinXo8n40JgY2Bof4Ajx1qC8drOVPDF_9ag-_ARK@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I've got problems with the bge(4) interfaces on HS12 blades installed
within an IBM BladeCenter.
Basically, the interfaces are recognized and attached, but I don't get
a carrier detected. The hardware is ok, and there is indeed a gigabit
switch connected to the ports.
ifconfig output:
bge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 150=
0
options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTAT=
E>
capabilities=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LIN=
KSTATE>
ether 00:1a:64:56:7e:3a
inet6 fe80::21a:64ff:fe56:7e3a%bge0 prefixlen 64 scopeid 0x1
inet 192.168.100.1 netmask 0xffffff00 broadcast 192.168.100.255
nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
supported media:
media autoselect
media 1000baseSX mediaopt full-duplex
media none
Related pciconf -lv entries:
bge0@pci0:4:4:0: class=3D0x020000 card=3D0x03861014 chip=3D0x166914e4
rev=3D0xa3 hdr=3D0x00
vendor =3D 'Broadcom Corporation'
device =3D 'NetXtreme 5714S Gigabit Ethernet'
class =3D network
subclass =3D ethernet
cap 07[40] =3D PCI-X 64-bit supports 133MHz, 2048 burst read, 1
split transaction
cap 01[48] =3D powerspec 2 supports D0 D3 current D0
cap 03[50] =3D VPD
cap 05[58] =3D MSI supports 8 messages, 64 bit enabled with 1 message
(There are more interfaces; I list bge0 only for brevity.)
Excerpt from dmesg -v:
bge0: <Broadcom NetXtreme Gigabit Fiber Controller, ASIC rev.
0x009003> mem 0xdbff0000-0xdbffffff,0xdbfe0000-0xdbfeffff irq 16 at
device 4.0 on pci4
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 56
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0034, rev. 0
brgphy0: 1000baseSX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1a:64:56:7e:3a
bge0: [MPSAFE]
bge0: [ITHREAD]
Output from devinfo -rv | grep brgphy:
bge0 pnpinfo vendor=3D0x14e4 device=3D0x1669 subvendor=3D0x1014
subdevice=3D0x0386 class=3D0x020000 at slot=3D4 function=3D0
bge1 pnpinfo vendor=3D0x14e4 device=3D0x1669 subvendor=3D0x1014
subdevice=3D0x0386 class=3D0x020000 at slot=3D4 function=3D1
This system is an 9-current as of today.
If there's anything else I can do to track this problem down, please
let me know.
Best regards
Jiri KUBICEK
--
KRAXNET s.r.o. -=A0 www.kraxnet.cz
Kamenicka 26, 170 00 Praha 7
---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTinXo8n40JgY2Bof4Ajx1qC8drOVPDF_9ag-_ARK>