Date: Wed, 08 Aug 2007 03:16:20 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: Danny Braniss <danny@cs.huji.ac.il> Cc: freebsd-current@freebsd.org Subject: Re: bge/BCM5704 crashes current Message-ID: <46B91964.5080102@intersonic.se> In-Reply-To: <E1I5htx-000N1N-LS@cs1.cs.huji.ac.il> References: <E1I5htx-000N1N-LS@cs1.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
Danny Braniss wrote: > Hi, > I trying out an IBM X3455 which has 2 Broadcom BCM5704. > they work ok under -stable, but -current just reboots without a trace, > no panic, no nothing - actually some garbage on the serial port. > I tried wit/and without msi. > > this is what i get under -stable: > bge0@pci2:1:0: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10 > hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM5704 NetXtreme Dual Gigabit Adapter' > class = network > subclass = ethernet > cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split > transaction > cap 01[48] = powerspec 2 supports D0 D3 current D0 > cap 03[50] = VPD > cap 05[58] = MSI supports 8 messages, 64 bit > bge1@pci2:1:1: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10 > hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM5704 NetXtreme Dual Gigabit Adapter' > class = network > subclass = ethernet > cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split > transaction > cap 01[48] = powerspec 2 supports D0 D3 current D0 > cap 03[50] = VPD > cap 05[58] = MSI supports 8 messages, 64 bit > Same here, system is HP Proliant DL380G4. System will lock hard at network start. bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xfdef0000-0xfdefffff irq 25 at device 1.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xfdee0000-0xfdeeffff irq 26 at device 1.1 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46B91964.5080102>