Date: Wed, 05 Dec 2007 11:18:19 -0500 From: Mike Tancsa <mike@sentex.net> To: Philipp Wuensche <cryx-freebsd@h3q.com>, <freebsd-performance@freebsd.org> Subject: Re: tuning for high connection rates Message-ID: <200712051616.lB5GGGvb029587@lava.sentex.ca> In-Reply-To: <4755ED57.6030603@h3q.com> References: <4755ED57.6030603@h3q.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 07:14 PM 12/4/2007, Philipp Wuensche wrote:
>The debug output of em0 looks like this:
>
>em0: CTRL = 0x40140248 RCTL = 0x8002
>em0: Packet buffer = Tx=20k Rx=12k
>em0: Flow control watermarks high = 10240 low = 8740
>em0: tx_int_delay = 66, tx_abs_int_delay = 66
>em0: rx_int_delay = 32, rx_abs_int_delay = 66
>em0: fifo workaround = 0, fifo_reset_count = 0
>em0: hw tdh = 183, hw tdt = 183
>em0: hw rdh = 139, hw rdt = 139
>em0: Num Tx descriptors avail = 223
>em0: Tx Descriptors not avail1 = 6225
>em0: Tx Descriptors not avail2 = 3
>em0: Std mbuf failed = 0
>em0: Std mbuf cluster failed = 0
>em0: Driver dropped packets = 0
>em0: Driver tx dma failure in encap = 0
If you do a
sysctl -w dev.em.0.stats=1
It will spit the nic stats to syslog. What are the results ? Also,
what does ifconfig em0 look like (i.e. what options do you have set, speed etc)
---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200712051616.lB5GGGvb029587>