Date: Tue, 30 Apr 2002 18:55:39 +0200 From: Olivier Cherrier <Olivier.Cherrier@cediti.be> To: "'freebsd-sparc@freebsd.org'" <freebsd-sparc@freebsd.org> Subject: panic installing on a ultra2 Message-ID: <BB863FBA3E3CAE4DAC430686AD28EA56039328@brisefer.cediti.be>
next in thread | raw e-mail | index | archive | help
Hello,
I try to install FreeBSD -current (last snapshots from 2002/04/08)
on a Sun Ultra2 (2 x 168 MHz CPU and 256 Mo RAM).
Here is the output of the panic:
#############
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #9: Tue Apr 9 04:25:17 GMT 2002
jake@u60.locore.ca:/usr/current/src/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0x80438000.
Timecounter "tick" frequency 167996109 Hz
cpu0: Sun Microsystems UltraSparc-I Processor (168.00 MHZ CPU)
cpu1: Sun Microsystems UltraSparc-I Processor (168.00 MHZ CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
nexus0: <OpenFirmware Nexus device>
sbus0: clock 25.000 MHz
DVMA map: 0xff800000 to 0xffffffff
initialializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: <SUNW,CS4231>, type (unknown) (no driver attached)
sbus0: <auxio>, type (unknown) (no driver attached)
sbus0: <flashprom>, type (unknown) (no driver attached)
sbus0: <SUNW,fdtwo>, type block (no driver attached)
eeprom0: <SBus EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
eeprom0: hostid 808621bc
sbus0: <zs>, type serial (no driver attached)
sbus0: <zs>, type serial (no driver attached)
sbus0: <sc>, type (unknown) (no driver attached)
sbus0: <SUNW,pll>, type (unknown) (no driver attached)
sbus0: <SUNW,fas>, type scsi (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem
0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c
04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 2017 on sbus0
hme0: Ethernet address: 08:00:20:86:21:bc
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sbus0: <SUNW,bpp>, type (unknown) (no driver attached)
sbus0: <QLGC,isp>, type scsi (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem
0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c
04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 1996 on sbus0
hme1: Ethernet address: 08:00:20:86:21:bc
miibus1: <MII bus> on hme1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sbus0: <QLGC,isp>, type scsi (no driver attached)
sbus0: <ba>, type (unknown) (no driver attached)
SMP: AP CPU #1 Launched!
Stopped at cpu_switch+0x5e4: restore %g0, %g0, %g0
db>
#############
It seems that the SMP is the problem. no?
Please, cc me because I am not on the list. Thanks.
PS: I also tried to boot in single user mode. It is the same
thing.
Olivier Cherrier - http://www.cediti.be
tel : 003271259412
Gosselies - Belgique
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BB863FBA3E3CAE4DAC430686AD28EA56039328>