Date: Wed, 24 Mar 2010 16:59:07 +0300 From: Roman Petrov <romanpetrov87@gmail.com> To: freebsd-acpi@FreeBSD.org Subject: HP 500 Notebook PC Message-ID: <3024f8471003240659r72afdf02j890d8314cd213e30@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
--0016e6daa82b81347404828c55cc
Content-Type: text/plain; charset=ISO-8859-1
I have a notebook HP 500, a problem with ACPI:
dmesg
acpi_ec0: EcRead: failed waiting to get data
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by
Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed
[\\_SB_.C002.C003.C004.C158] (Node 0xc31a0780),
AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.C158]
(Node 0xc31a7260), AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed
[\\_SB_.C15E._BST] (Node 0xc31a71a0), AE_NO_HARDWARE_RESPONSE
uname -a
FreeBSD irishka-bsd 7.3-RELEASE FreeBSD 7.3-RELEASE #0: Sun Mar 21
06:15:01 UTC 2010
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 528285696 (503 MB)
avail memory = 502931456 (479 MB)
ACPI APIC Table: <HP 30C4 >
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP 30C4> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x3007 mem
0xd0600000-0xd067ffff,0xc0000000-0xcfffffff,0xd0680000-0xd06bffff irq
16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0700000-0xd077ffff at device
2.1 on pci0
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x3020-0x303f irq 19 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem
0xd0780000-0xd07803ff irq 19 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: wrong number of companions (4 != 1)
usb1: companion controller, 2 ports each: usb0
usb1: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 4.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0xd0001000-0xd0001fff irq 18
at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fxp0: <Intel Pro/100 VE Network Connection> port 0x2000-0x203f mem
0xd0002000-0xd0002fff irq 20 at device 8.0 on pci2
fxp0: Enabling Rx lock-up workaround
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:16:d4:9d:19:3e
fxp0: [ITHREAD]
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3580-0x358f irq 16 at device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1729013888 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <Seagate ST96812A 3.05> at ata0-master UDMA100
ath0: <Atheros 2417> mem 0xd0010000-0xd001ffff irq 18 at device 0.0 on cardbus0
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:1d:0f:c9:c0:77
ath0: mac 15.0 phy 7.0 radio 10.2
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/HH15> at ata0-slave PIO4
Trying to mount root from ufs:/dev/ad0s1a
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x30c4103c chip=0x25908086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile Intel(R) 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (915GM)'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x30c4103c chip=0x25928086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'you can be found in www.intelcom (Intel 82852/82855
Graphic controller family)'
class = display
subclass = VGA
vgapci1@pci0:0:2:1: class=0x038000 card=0x30c4103c chip=0x27928086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile Intel(R) 915GM/GMS/, 910GML Express Chipset
Family (Mobile 82915GLx/x/x)'
class = display
uhci0@pci0:0:29:0: class=0x0c0300 card=0x30c4103c chip=0x26588086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *1 (82801FB/FR/FW/FRW)'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x30c4103c chip=0x265c8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB 2.0 EHCI Controller (82801FB/FR/FW/FRW)'
class = serial bus
subclass = USB
pcib1@pci0:0:30:0: class=0x060401 card=0x30c4103c chip=0x24488086
rev=0xd3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to
PCI Bridge'
class = bridge
subclass = PCI-PCI
none0@pci0:0:30:2: class=0x040100 card=0x30c4103c chip=0x266e8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'AC '97 Audio Controller/ Sigmatel (SoundMAX
Integrated Digital Audio) (Intel Corporation 82830M/MG SDRAM
Controller / Ho)'
class = multimedia
subclass = audio
none1@pci0:0:30:3: class=0x070300 card=0x30c4103c chip=0x266d8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel 82801GB ICH7 - High Definition Audio
Controller [A-1] (82801I)'
class = simple comms
subclass = generic modem
isab0@pci0:0:31:0: class=0x060100 card=0x30c4103c chip=0x26418086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'LPC Interface Bridge (ICH6-M) (82801FBM)'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x30c4103c chip=0x266f8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'PATA100 Controller - 266F (82801FB/FBM/FW/FR/FRW)'
class = mass storage
subclass = ATA
none2@pci0:2:4:0: class=0x028000 card=0x12f6103c chip=0x42208086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'driverIntel PRO/Wireless 2200BG (MPCI3B)'
class = network
cbb0@pci0:2:6:0: class=0x060700 card=0x30c4103c chip=0x14101524
rev=0x01 hdr=0x02
vendor = 'ENE Technology Inc'
device = 'CardBus Controller (CB-1420)'
class = bridge
subclass = PCI-CardBus
fxp0@pci0:2:8:0: class=0x020000 card=0x30c4103c chip=0x10928086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/100 VE Network Controller (27DA)'
class = network
subclass = ethernet
ath0@pci0:3:0:0: class=0x020000 card=0x1055168c chip=0x001d168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
class = network
subclass = ethernet
sysctl hw.acpi.
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 1
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.battery.life: -1
hw.acpi.battery.time: -1
hw.acpi.battery.state: 7
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 56.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 0
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 100.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: -1
hw.acpi.thermal.tz0._TC2: -1
hw.acpi.thermal.tz0._TSP: -1
hw.acpi.cpu.cx_lowest: C1
acpidump -t -d > hp500.asl
iasl hp500.asl
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20070320 [Mar 21 2010]
Copyright (C) 2000 - 2007 Intel Corporation
Supports ACPI Specification Revision 3.0a
hp500.asl 3181: And (Local1, 0xFFFF)
Warning 1104 - Result is not used, operator has no effect ^
ASL Input: hp500.asl - 7240 lines, 254703 bytes, 3290 keywords
AML Output: /tmp/acpidump.aml - 26288 bytes 787 named objects 2503
executable opcodes
Compilation complete. 0 Errors, 1 Warnings, 0 Remarks, 957 Optimizations
hp500.asl > http://forum.lissyara.su/download/file.php?id=3084
ps: http://forum.lissyara.su/viewtopic.php?f=8&t=25056&start=0
Thanks in advance.
--0016e6daa82b81347404828c55cc--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3024f8471003240659r72afdf02j890d8314cd213e30>