Date: Sat, 31 Jan 2004 02:20:08 +0100 From: Eugene <eugene3@web.de> To: freebsd-current@freebsd.org Subject: 5.2-CURRENT - ata1-slave : TIMEOUT - SETFEATURES - another evil continues... Message-ID: <200401310220.08696.eugene3@web.de> In-Reply-To: <20040131004017.E156916A52D@hub.freebsd.org> References: <20040131004017.E156916A52D@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
hi there...
i cvsupped some minutes ago, and built a new kernel after i saw an issue on
this current list meaning it would be fixed... and after i saw some changes
by sos while cvsupping...
not the message (see subject) about timout is gone... but the kernel still
does not boot... it just hangs at the same position.
i turned off apic and acpi...
the courious this is... when i boot with -v... sometimes... only
_sometimes_... the kernel boots fully into console...
this is very strange... (and strongly indicates a timing issue?)
in -v boot bode i see the freeze happening after:
-> ata1-slave: setting PIO4 on VIA 8235 chip
some other small stalls seem to happen after:
-> GEOM: configure...
and as the other posts.. its a liteon-cdrw at ata1-slave
is this realy a problem with liteon ?!
i remember i read in the linux kernel list, that sometime ago, they had
problems with a cdrom by sony... i cant remember what exactly the problemw
as... but they someone pointed out this drive does strange things... maybe
some parallels with this issue now?
now the "boot -v kernel" output... well, this output was taken while the boot
finished... no freeze... but the next boot did freeze again... realy!
btw: i set the system to no-overclock to test if that was the issue... without
success... the overclocking didnt matter...
-------- boot -v output -----
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sat Jan 31 01:25:39 CET 2004
root@isis.localnet:/usr/obj/usr/src/sys/ISIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f1000.
Calibrating clock(s) ... i8254 clock: 1193250 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1853661375 Hz
CPU: AMD Athlon(tm) XP 2200+ (1853.66-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x680 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000001f6bffff, 518627328 bytes (126618 pages)
avail memory = 519757824 (495 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdac0
bios32: Entry = 0xfdad0 (c00fdad0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdaf1
pnpbios: Found PnP BIOS data at 0xc00f7990
pnpbios: Entry = f0000:685b Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106)
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00f8000
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 17 A 0xfe 14
embedded 0 17 B 0xff 15
embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 0 5 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 1 0 5 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 1 0 5 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 0 5 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 6 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 2 0 6 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 0 6 C 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 6 D 0x01 3 4 5 6 7 10 11 12 14 15
slot 3 0 7 A 0x05 3 4 5 6 7 10 11 12 14 15
slot 3 0 7 B 0x01 3 4 5 6 7 10 11 12 14 15
slot 3 0 7 C 0x02 3 4 5 6 7 10 11 12 14 15
slot 3 0 7 D 0x03 3 4 5 6 7 10 11 12 14 15
slot 4 0 8 A 0x03 3 4 5 6 7 10 11 12 14 15
slot 4 0 8 B 0x05 3 4 5 6 7 10 11 12 14 15
slot 4 0 8 C 0x01 3 4 5 6 7 10 11 12 14 15
slot 4 0 8 D 0x02 3 4 5 6 7 10 11 12 14 15
slot 5 0 10 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 5 0 10 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 5 0 10 C 0x05 3 4 5 6 7 10 11 12 14 15
slot 5 0 10 D 0x01 3 4 5 6 7 10 11 12 14 15
slot 6 0 11 A 0x03 3 4 5 6 7 10 11 12 14 15
slot 6 0 11 B 0x05 3 4 5 6 7 10 11 12 14 15
slot 6 0 11 C 0x01 3 4 5 6 7 10 11 12 14 15
slot 6 0 11 D 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 13 A 0x05 3 4 5 6 7 10 11 12 14 15
embedded 0 14 A 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 15 A 0x03 3 4 5 6 7 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3189, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb168, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e800, size 5, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 0:10 INTA BIOS irq 10
found-> vendor=0x1102, dev=0x0002, revid=0x0a
bus=0, slot=10, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x0a
bus=0, slot=10, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 7, enabled
map[14]: type 1, range 32, base dfffff80, size 7, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:11 INTA BIOS irq 5
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e000, size 5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:16 INTA BIOS irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dffffe00, size 8, enabled
pci_cfgintr_valid: BIOS irq 3 is valid
pci_cfgintr: 0:16 INTD BIOS irq 3
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0
on pci0
agp0: allocating GATT for aperture of size 229M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdde00000-0xdfefffff
pcib1: prefetched decode 0xcdd00000-0xddcfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base de000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 27, enabled
pci_cfgintr_search: linked (1) to configured irq 11 at 0:16:0
pci_cfgintr: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x0281, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xe800-0xe81f irq 10 at device 10.0 on pci0
emu: setmap (1f2000, 800), nseg=1, error=0
emu: setmap (1f1000, 1000), nseg=1, error=0
pcm0: <SigmaTel STAC9708/11 AC97 Codec (id = 0x83847608)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D
Enhancement
pcm0: Primary codec extended features surround DAC
emu: setmap (22f000, 1000), nseg=1, error=0
emu: setmap (1d5000, 1000), nseg=1, error=0
emu: setmap (1f7000, 1000), nseg=1, error=0
emu: setmap (241000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 2bf000, 1000; 0xc404b000 -> 2bf000
pcm0: sndbuf_setmap 23d000, 1000; 0xc4049000 -> 23d000
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem
0xdfffff80-0xdfffffff irq 5 at device 11.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:04:75:d2:d4:a2
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.0 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on
pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00
devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 11 devices, largest 126 bytes
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1
PNP0a03: adding io range 0x400-0x40f, size=0x10, align=0x1
PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0a03: adding io range 0x880-0x8ff, size=0x80, align=0x1
PNP0a03: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0a03: adding io range 0x2f-0x2f, size=0x1, align=0x1
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x1ffeffff, size=0x1fef0000
PNP0c01: adding fixed memory32 range 0x1fff0000-0x1fff7fff, size=0x8000
PNP0c01: adding fixed memory32 range 0x1fff8000-0x1fffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x4
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 9 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-6f, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1853661375 Hz quality 800
Timecounters tick every 10.000 msec
BRIDGE 031224 loaded
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ata0-slave: setting PIO4 on VIA 8235 chip
ata0-slave: setting UDMA100 on VIA 8235 chip
ad0: <WDC WD1200JB-00CRA1/17.07W17> ATA-5 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1019/254/63 s:63 l:16386237
[1] f:80 typ:165 s(CHS):1020/0/1 e(CHS):1023/254/63 s:16386300 l:16370235
[2] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/254/63 s:32756535 l:81915435
[3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/254/63 s:114671970 l:119764575
GEOM: Configure ad0s1, start 32256 length 8389753344 end 8389785599
GEOM: Configure ad0s2, start 8389785600 length 8381560320 end 16771345919
GEOM: Configure ad0s3, start 16771345920 length 41940702720 end 58712048639
GEOM: Configure ad0s4, start 58712048640 length 61319462400 end 120031511039
ad1: <IC35L040AVVA07-0/VA2OA50K> ATA-5 disk at ata0-slave
ad1: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 8235 chip
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1047306240 end 1315741695
GEOM: Configure ad0s2c, start 0 length 8381560320 end 8381560319
GEOM: Configure ad0s2d, start 1315741696 length 268435456 end 1584177151
GEOM: Configure ad0s2e, start 1584177152 length 268435456 end 1852612607
GEOM: Configure ad0s2f, start 1852612608 length 4194304000 end 6046916607
GEOM: Configure ad0s2g, start 6046916608 length 2334643712 end 8381560319
ata1-slave: setting PIO4 on VIA 8235 chip
GEOM: new disk ad1
acd0: <JLMS XJ-HD165H/CH11> DVDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITE-ON LTR-52246S/6S0F> CDRW drive at ata1 as slave
acd1: read 20109KB/s (8937KB/s) write 172KB/s (8937KB/s), 2048KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61432497
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 31453438464 end 31453470719
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <JLMS XJ-HD165H CH11> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
pass1 at ata1 bus 0 target 1 lun 0
pass1: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
pass1: 16.000MB/s transfers
(cd0:ata1:0:0:0): Retrying Command
GEOM: new disk cd0
GEOM: new disk cd1
(cd1:ata1:0:1:0): Retrying Command
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <JLMS XJ-HD165H CH11> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
cd1 at ata1 bus 0 target 1 lun 0
cd1: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd1:ata1:0:1:0): Retrying Command
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): Retrying Command
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
psmintr: unknown PS2++ packet type 11: 0xe8 0xfa 0xaa
Eugene
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401310220.08696.eugene3>