Date: Wed, 19 Oct 2011 15:35:32 +0530 From: Gautam <execve@gmail.com> To: questions@freebsd.org Subject: Wireless USB Adapter fails to work with ndisgen (rtl8192su) Message-ID: <CAD9pFYDR8pvR-p7oP3Pvm6euEde3v=iRA0Sg8JmCwrg_Uo6aNQ@mail.gmail.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
I am trying to use the Belkin Surf & Share Wireless USB Adapter on FreeBSD
8-Stable (csup-ed on 18.Oct), but it doesnt work. This is based on the
realtek 8192 chip. After installing the new kernel and world, I then used
ndisgen to generate the ko.
I am able to get wlan0 "UP" after I manually load the generated kernel
module rtl8192su_sys.ko
ndis0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect
ssid "" channel 1 (2412 MHz 11b)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
roaming MANUAL bintval 0
However, both "ifconfig wlan0 scan" and "ifconfig wlan0 list scan" yield
nothing.
# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen4.2: <product 0x845a vendor 0x050d> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen1.2: <OM vendor 0x04f3> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON
ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
Relevant logs are:
Oct 19 14:32:20 linbox kernel: ndis0: <vendor 0x050d product 0x845a, class
0/0, rev 2.00/2.00, addr 2> on usbus4
Oct 19 14:32:20 linbox kernel: ndis0: NDIS API version: 5.1
Oct 19 14:32:20 linbox kernel: ndis0: usbd_pnp: unsupported I/O dispatch
27:8
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product
0x845a bus uhub4
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product
0x845a bus uhub4
Oct 19 14:32:22 linbox kernel: wlan0: Ethernet address: 94:44:52:61:e0:dc
I am attaching the relevant /var/log/messages and the typescript. Anything
to be set in sysctl ?
Any pointers on how to debug this further -- I would really like to get this
to work on FreeBSD ?
Thanks
Gautam
[-- Attachment #2 --]
Oct 19 14:29:32 linbox syslogd: kernel boot file is /boot/kernel/kernel
Oct 19 14:29:32 linbox kernel: Copyright (c) 1992-2011 The FreeBSD Project.
Oct 19 14:29:32 linbox kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 19 14:29:32 linbox kernel: The Regents of the University of California. All rights reserved.
Oct 19 14:29:32 linbox kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 19 14:29:32 linbox kernel: FreeBSD 8.2-STABLE #0: Tue Oct 18 12:06:16 IST 2011
Oct 19 14:29:32 linbox kernel: root@linbox:/usr/obj/usr/src/sys/GENERIC i386
Oct 19 14:29:32 linbox kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Oct 19 14:29:32 linbox kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3059.02-MHz 686-class CPU)
Oct 19 14:29:32 linbox kernel: Origin = "GenuineIntel" Id = 0xf49 Family = f Model = 4 Stepping = 9
Oct 19 14:29:32 linbox kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Oct 19 14:29:32 linbox kernel: Features2=0x651d<SSE3,DTES64,MON,DS_CPL,TM2,CNXT-ID,CX16,xTPR>
Oct 19 14:29:32 linbox kernel: AMD Features=0x20100000<NX,LM>
Oct 19 14:29:32 linbox kernel: TSC: P-state invariant
Oct 19 14:29:32 linbox kernel: real memory = 1073741824 (1024 MB)
Oct 19 14:29:32 linbox kernel: avail memory = 1028067328 (980 MB)
Oct 19 14:29:32 linbox kernel: ACPI APIC Table: <IntelR AWRDACPI>
Oct 19 14:29:32 linbox kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Oct 19 14:29:32 linbox kernel: FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
Oct 19 14:29:32 linbox kernel: cpu0 (BSP): APIC ID: 0
Oct 19 14:29:32 linbox kernel: cpu1 (AP/HT): APIC ID: 1
Oct 19 14:29:32 linbox kernel: ioapic0: Changing APIC ID to 4
Oct 19 14:29:32 linbox kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Oct 19 14:29:32 linbox kernel: kbd1 at kbdmux0
Oct 19 14:29:32 linbox kernel: acpi0: <IntelR AWRDACPI> on motherboard
Oct 19 14:29:32 linbox kernel: acpi0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: acpi0: Power Button (fixed)
Oct 19 14:29:32 linbox kernel: acpi0: reservation of 0, a0000 (3) failed
Oct 19 14:29:32 linbox kernel: acpi0: reservation of 100000, 3f6f0000 (3) failed
Oct 19 14:29:32 linbox kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Oct 19 14:29:32 linbox kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
Oct 19 14:29:32 linbox kernel: cpu0: <ACPI CPU> on acpi0
Oct 19 14:29:32 linbox kernel: cpu1: <ACPI CPU> on acpi0
Oct 19 14:29:32 linbox kernel: acpi_button0: <Power Button> on acpi0
Oct 19 14:29:32 linbox kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Oct 19 14:29:32 linbox kernel: pci0: <ACPI PCI bus> on pcib0
Oct 19 14:29:32 linbox kernel: vgapci0: <VGA-compatible display> port 0xe400-0xe407 mem 0xd0100000-0xd017ffff,0xc0000000-0xcfffffff,0xd0180000-0xd01bffff irq 16 at device 2.0 on pci0
Oct 19 14:29:32 linbox kernel: agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
Oct 19 14:29:32 linbox kernel: agp0: aperture size is 256M, detected 7932k stolen memory
Oct 19 14:29:32 linbox kernel: uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe000-0xe01f irq 23 at device 29.0 on pci0
Oct 19 14:29:32 linbox kernel: uhci0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
Oct 19 14:29:32 linbox kernel: uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe100-0xe11f irq 19 at device 29.1 on pci0
Oct 19 14:29:32 linbox kernel: uhci1: [ITHREAD]
Oct 19 14:29:32 linbox kernel: usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
Oct 19 14:29:32 linbox kernel: uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe200-0xe21f irq 18 at device 29.2 on pci0
Oct 19 14:29:32 linbox kernel: uhci2: [ITHREAD]
Oct 19 14:29:32 linbox kernel: usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
Oct 19 14:29:32 linbox kernel: uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xe300-0xe31f irq 16 at device 29.3 on pci0
Oct 19 14:29:32 linbox kernel: uhci3: [ITHREAD]
Oct 19 14:29:32 linbox kernel: usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
Oct 19 14:29:32 linbox kernel: ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd01c0000-0xd01c03ff irq 23 at device 29.7 on pci0
Oct 19 14:29:32 linbox kernel: ehci0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: usbus4: EHCI version 1.0
Oct 19 14:29:32 linbox kernel: usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
Oct 19 14:29:32 linbox kernel: pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Oct 19 14:29:32 linbox kernel: pci1: <ACPI PCI bus> on pcib1
Oct 19 14:29:32 linbox kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xd0010000-0xd00100ff irq 23 at device 11.0 on pci1
Oct 19 14:29:32 linbox kernel: miibus0: <MII bus> on rl0
Oct 19 14:29:32 linbox kernel: rlphy0: <RealTek internal media interface> PHY 0 on miibus0
Oct 19 14:29:32 linbox kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 19 14:29:32 linbox kernel: rl0: Ethernet address: 00:16:17:4b:0b:26
Oct 19 14:29:32 linbox kernel: rl0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: pci0: <multimedia, audio> at device 30.2 (no driver attached)
Oct 19 14:29:32 linbox kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Oct 19 14:29:32 linbox kernel: isa0: <ISA bus> on isab0
Oct 19 14:29:32 linbox kernel: atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
Oct 19 14:29:32 linbox kernel: ata0: <ATA channel 0> on atapci0
Oct 19 14:29:32 linbox kernel: ata0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: ata1: <ATA channel 1> on atapci0
Oct 19 14:29:32 linbox kernel: ata1: [ITHREAD]
Oct 19 14:29:32 linbox kernel: atapci1: <Intel ICH6 SATA150 controller> port 0xe900-0xe907,0xea00-0xea03,0xeb00-0xeb07,0xec00-0xec03,0xed00-0xed0f irq 19 at device 31.2 on pci0
Oct 19 14:29:32 linbox kernel: atapci1: [ITHREAD]
Oct 19 14:29:32 linbox kernel: ata2: <ATA channel 0> on atapci1
Oct 19 14:29:32 linbox kernel: ata2: [ITHREAD]
Oct 19 14:29:32 linbox kernel: ata3: <ATA channel 1> on atapci1
Oct 19 14:29:32 linbox kernel: ata3: [ITHREAD]
Oct 19 14:29:32 linbox kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
Oct 19 14:29:32 linbox kernel: acpi_tz0: <Thermal Zone> on acpi0
Oct 19 14:29:32 linbox kernel: atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Oct 19 14:29:32 linbox kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Oct 19 14:29:32 linbox kernel: fdc0: [FILTER]
Oct 19 14:29:32 linbox kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Oct 19 14:29:32 linbox kernel: uart0: [FILTER]
Oct 19 14:29:32 linbox kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
Oct 19 14:29:32 linbox kernel: uart1: [FILTER]
Oct 19 14:29:32 linbox kernel: ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
Oct 19 14:29:32 linbox kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Oct 19 14:29:32 linbox kernel: ppc0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: ppbus0: <Parallel port bus> on ppc0
Oct 19 14:29:32 linbox kernel: plip0: <PLIP network interface> on ppbus0
Oct 19 14:29:32 linbox kernel: plip0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: lpt0: <Printer> on ppbus0
Oct 19 14:29:32 linbox kernel: lpt0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: lpt0: Interrupt-driven port
Oct 19 14:29:32 linbox kernel: ppi0: <Parallel I/O> on ppbus0
Oct 19 14:29:32 linbox kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Oct 19 14:29:32 linbox kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Oct 19 14:29:32 linbox kernel: kbd0 at atkbd0
Oct 19 14:29:32 linbox kernel: atkbd0: [GIANT-LOCKED]
Oct 19 14:29:32 linbox kernel: atkbd0: [ITHREAD]
Oct 19 14:29:32 linbox kernel: pmtimer0 on isa0
Oct 19 14:29:32 linbox kernel: orm0: <ISA Option ROM> at iomem 0xd4000-0xd4fff pnpid ORM0000 on isa0
Oct 19 14:29:32 linbox kernel: sc0: <System console> at flags 0x100 on isa0
Oct 19 14:29:32 linbox kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 19 14:29:32 linbox kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 19 14:29:32 linbox kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Oct 19 14:29:32 linbox kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Oct 19 14:29:32 linbox kernel: Timecounters tick every 1.000 msec
Oct 19 14:29:32 linbox kernel: usbus0: 12Mbps Full Speed USB v1.0
Oct 19 14:29:32 linbox kernel: usbus1: 12Mbps Full Speed USB v1.0
Oct 19 14:29:32 linbox kernel: usbus2: 12Mbps Full Speed USB v1.0
Oct 19 14:29:32 linbox kernel: usbus3: 12Mbps Full Speed USB v1.0
Oct 19 14:29:32 linbox kernel: usbus4: 480Mbps High Speed USB v2.0
Oct 19 14:29:32 linbox kernel: ugen0.1: <Intel> at usbus0
Oct 19 14:29:32 linbox kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Oct 19 14:29:32 linbox kernel: ugen1.1: <Intel> at usbus1
Oct 19 14:29:32 linbox kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Oct 19 14:29:32 linbox kernel: ugen2.1: <Intel> at usbus2
Oct 19 14:29:32 linbox kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Oct 19 14:29:32 linbox kernel: ugen3.1: <Intel> at usbus3
Oct 19 14:29:32 linbox kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
Oct 19 14:29:32 linbox kernel: ugen4.1: <Intel> at usbus4
Oct 19 14:29:32 linbox kernel: uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
Oct 19 14:29:32 linbox kernel: acd0: DVDR <HL-DT-STDVD-RAM GSA-H20N/1.01> at ata0-master UDMA33
Oct 19 14:29:32 linbox kernel: ata0: DMA limited to UDMA33, controller found non-ATA66 cable
Oct 19 14:29:32 linbox kernel: ad1: 38204MB <SAMSUNG SP4002H QU100-61> at ata0-slave UDMA33
Oct 19 14:29:32 linbox kernel: ad4: 76319MB <WDC WD800BD-22LRA0 06.01D06> at ata2-master UDMA100 SATA
Oct 19 14:29:32 linbox kernel: SMP: AP CPU #1 Launched!
Oct 19 14:29:32 linbox kernel: Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
Oct 19 14:29:32 linbox kernel: uhub0: 2 ports with 2 removable, self powered
Oct 19 14:29:32 linbox kernel: uhub1: 2 ports with 2 removable, self powered
Oct 19 14:29:32 linbox kernel: uhub2: 2 ports with 2 removable, self powered
Oct 19 14:29:32 linbox kernel: uhub3: 2 ports with 2 removable, self powered
Oct 19 14:29:32 linbox kernel: Root mount waiting for: usbus4
Oct 19 14:29:32 linbox last message repeated 2 times
Oct 19 14:29:32 linbox kernel: uhub4: 8 ports with 8 removable, self powered
Oct 19 14:29:32 linbox kernel: Root mount waiting for: usbus4
Oct 19 14:29:32 linbox kernel: ugen4.2: <vendor 0x050d> at usbus4
Oct 19 14:29:32 linbox kernel: Trying to mount root from ufs:/dev/ad4s1a
Oct 19 14:29:32 linbox kernel: ugen1.2: <vendor 0x04f3> at usbus1
Oct 19 14:29:32 linbox kernel: ums0: <vendor 0x04f3 OM, class 0/0, rev 1.10/24.58, addr 2> on usbus1
Oct 19 14:29:32 linbox kernel: ugen0.2: <vendor 0x1130> at usbus0
Oct 19 14:29:32 linbox kernel: ums0: 3 buttons and [XYZ] coordinates ID=0
Oct 19 14:29:32 linbox kernel: uhid0: <vendor 0x1130 USB AUDIO, class 0/0, rev 1.10/1.40, addr 2> on usbus0
Oct 19 14:29:32 linbox kernel: uaudio0: <vendor 0x1130 USB AUDIO, class 0/0, rev 1.10/1.40, addr 2> on usbus0
Oct 19 14:29:32 linbox kernel: uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format
Oct 19 14:29:32 linbox kernel: uaudio0: No recording!
Oct 19 14:29:32 linbox kernel: uaudio0: No midi sequencer
Oct 19 14:29:32 linbox kernel: pcm0: <USB audio> on uaudio0
Oct 19 14:29:33 linbox thttpd[1091]: thttpd/2.25b 29dec2003 starting on port 80
Oct 19 14:29:33 linbox thttpd[1091]: started as root without requesting chroot(), warning only
Oct 19 14:29:33 linbox kernel: rl0: link state changed to UP
Oct 19 14:29:34 linbox ntpd[1307]: ntpd 4.2.4p5-a (1)
Oct 19 14:29:35 linbox dhclient: New IP Address (rl0): 10.0.0.2
Oct 19 14:29:35 linbox dhclient: New Subnet Mask (rl0): 255.255.255.0
Oct 19 14:29:35 linbox dhclient: New Broadcast Address (rl0): 10.0.0.255
Oct 19 14:29:35 linbox dhclient: New Routers (rl0): 10.0.0.1
Oct 19 14:29:36 linbox dbus[1229]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Oct 19 14:29:36 linbox dbus[1229]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Oct 19 14:29:36 linbox dbus[1229]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Oct 19 14:29:36 linbox dbus[1229]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Oct 19 14:29:39 linbox login: ROOT LOGIN (root) ON ttyv0
Oct 19 14:30:33 linbox ntpd[1307]: no reply; clock not set
Oct 19 14:32:20 linbox kernel: ndis0: <vendor 0x050d product 0x845a, class 0/0, rev 2.00/2.00, addr 2> on usbus4
Oct 19 14:32:20 linbox kernel: ndis0: NDIS API version: 5.1
Oct 19 14:32:20 linbox kernel: ndis0: usbd_pnp: unsupported I/O dispatch 27:8
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product 0x845a bus uhub4
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product 0x845a bus uhub4
Oct 19 14:32:22 linbox kernel: wlan0: Ethernet address: 94:44:52:61:e0:dc
Oct 19 14:32:50 linbox login: ROOT LOGIN (root) ON ttyv1
[-- Attachment #3 --]
Script started on Wed Oct 19 14:31:33 2011
[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:16:17:4b:0b:26
inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
[root@linbox ~/freebsd/rtl8192/WinXP]# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen4.2: <product 0x845a vendor 0x050d> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <OM vendor 0x04f3> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
[root@linbox ~/freebsd/rtl8192/WinXP]# ls
net8192su.cat rtl8192su.sys typescript
net8192su.inf rtl8192su_sys.ko
[root@linbox ~/freebsd/rtl8192/WinXP]# kldload rtl8192su_sys.ko [1@.[1@/
[root@linbox ~/freebsd/rtl8192/WinXP]#
[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:16:17:4b:0b:26
inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
ndis0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect
ssid "" channel 1 (2412 MHz 11b)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
roaming MANUAL bintval 0
[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig wlan0 scan
[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig wlan0 scan list scan
[root@linbox ~/freebsd/rtl8192/WinXP]# [H[J[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:16:17:4b:0b:26
inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
ndis0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect
ssid "" channel 1 (2412 MHz 11b)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
roaming MANUAL bintval 0
[root@linbox ~/freebsd/rtl8192/WinXP]# ifconfig [K wlan0 list scan[5Pscan
[root@linbox ~/freebsd/rtl8192/WinXP]# sysctl -a | grep wlan
net.wlan.cac_timeout: 60
net.wlan.nol_timeout: 1800
net.wlan.debug: 0
net.wlan.addba_maxtries: 3
net.wlan.addba_backoff: 10000
net.wlan.addba_timeout: 250
net.wlan.recv_bar: 1
net.wlan.ampdu_age: 500
net.wlan.hwmp.inact: 5000
net.wlan.hwmp.rannint: 1000
net.wlan.hwmp.rootint: 2000
net.wlan.hwmp.roottimeout: 5000
net.wlan.hwmp.pathlifetime: 5000
net.wlan.hwmp.replyforward: 1
net.wlan.hwmp.targetonly: 0
net.wlan.mesh.maxretries: 2
net.wlan.mesh.confirmtimeout: 40
net.wlan.mesh.holdingtimeout: 40
net.wlan.mesh.retrytimeout: 40
net.wlan.0.%parent: ndis0
net.wlan.0.driver_caps: 25174531
net.wlan.0.debug: 0
net.wlan.0.bmiss_max: 2
net.wlan.0.inact_run: 300
net.wlan.0.inact_probe: 30
net.wlan.0.inact_auth: 180
net.wlan.0.inact_init: 30
[root@linbox ~/freebsd/rtl8192/WinXP]# sysctl -a | grep wlan nds is
net.wlan.0.%parent: ndis0
debug.ndis: 0
hw.ndis_filepath: /compat/ndis
hw.ndisusb.halt: 1
dev.ndis.0.%desc: vendor 0x050d product 0x845a, class 0/0, rev 2.00/2.00, addr 2
dev.ndis.0.%driver: ndis
dev.ndis.0.%location: bus=1 hubaddr=8 port=4 devaddr=2 interface=0
dev.ndis.0.%pnpinfo: vendor=0x050d product=0x845a devclass=0x00 devsubclass=0x00 sernum="" release=0x0200 mode=host intclass=0xff intsubclass=0xff intprotocol=0xff
dev.ndis.0.%parent: uhub4
dev.ndis.0.AH_BcnIntv: 100
dev.ndis.0.Channel: 10
dev.ndis.0.Dot11dEnable: 0
dev.ndis.0.PSPXlinkMode: 0
dev.ndis.0.WirelessMode: 8
dev.ndis.0.RFOff: 0
dev.ndis.0.LedCtrl: 1
dev.ndis.0.DefaultKeyID: 0
dev.ndis.0.DefaultKey0:
dev.ndis.0.DefaultKey1:
dev.ndis.0.DefaultKey2:
dev.ndis.0.DefaultKey3:
dev.ndis.0.Environment: 1
dev.ndis.0.NdisVersion: 0x00050001
dev.ndis.0.SlotNumber: 01
dev.ndis.0.NetCfgInstanceId: {12345678-1234-5678-CAFE0-123456789ABC}
dev.ndis.0.DriverDesc: NDIS Network Adapter
dev.ndis.0.BusType: 15
dev.ndis.0.NetworkAddress: UNSET
dev.ndis.0.SSID: UNSET
dev.ndis.0.Bssid: UNSET
dev.ndis.0.ChargePump: UNSET
dev.ndis.0.CornerChange: UNSET
dev.ndis.0.TXAntenna: UNSET
dev.ndis.0.RXAntenna: UNSET
dev.ndis.0.WiFi11bIbss: UNSET
dev.ndis.0.WiFi11gIbss: UNSET
dev.ndis.0.BcnDenominator: UNSET
dev.ndis.0.ChannelPlan: UNSET
dev.ndis.0.ForcedDataRate: UNSET
dev.ndis.0.CtsToSelfRate: UNSET
dev.ndis.0.WirelessMode4ScanList: UNSET
dev.ndis.0.DataEncAlg: UNSET
dev.ndis.0.EncAlgorithm: UNSET
dev.ndis.0.AuthentAlg: UNSET
dev.ndis.0.DefaultKeyW0: UNSET
dev.ndis.0.DefaultKeyW1: UNSET
dev.ndis.0.DefaultKeyW2: UNSET
dev.ndis.0.DefaultKeyW3: UNSET
dev.ndis.0.NetworkType: UNSET
dev.ndis.0.EnablePreAuth: UNSET
dev.ndis.0.PowerSaveMode: UNSET
dev.ndis.0.IbssBeacon: UNSET
dev.ndis.0.ActingAsAp: UNSET
dev.ndis.0.DtimPeriod: UNSET
dev.ndis.0.PreambleMode: UNSET
dev.ndis.0.QoS: UNSET
dev.ndis.0.StaUapsd: UNSET
dev.ndis.0.MaxSPLength: UNSET
dev.ndis.0.ForcedPriority: UNSET
dev.ndis.0.CcxEnable: UNSET
dev.ndis.0.CcxRm: UNSET
dev.ndis.0.CcxOffLineDurUpLimit: UNSET
dev.ndis.0.DbgRmCase: UNSET
dev.ndis.0.bHwParaFile: UNSET
dev.ndis.0.ProtectionImpMode: UNSET
dev.ndis.0.bRegTxPowerControl: UNSET
dev.ndis.0.RegTPCPolarity: UNSET
dev.ndis.0.LowRfdThreshold: UNSET
dev.ndis.0.RegSWTxEncryptFlag: UNSET
dev.ndis.0.RegSWRxDecryptFlag: UNSET
dev.ndis.0.HctTest: UNSET
dev.ndis.0.HighPowerMechanism: UNSET
dev.ndis.0.bRateAdaptive: UNSET
dev.ndis.0.TurboMode: UNSET
dev.ndis.0.SwAntennaDiversity: UNSET
dev.ndis.0.AutoSelChnl: UNSET
dev.ndis.0.ChnlWeight: UNSET
dev.ndis.0.LiveTime: UNSET
dev.ndis.0.WdsMode: UNSET
dev.ndis.0.CustomerID: UNSET
dev.ndis.0.FragThresh: UNSET
dev.ndis.0.InitGainControlMode: UNSET
dev.ndis.0.ApEDCAParamBE: UNSET
dev.ndis.0.ApEDCAParamBK: UNSET
dev.ndis.0.ApEDCAParamVI: UNSET
dev.ndis.0.ApEDCAParamVO: UNSET
dev.ndis.0.StaEDCAParamBE: UNSET
dev.ndis.0.StaEDCAParamBK: UNSET
dev.ndis.0.StaEDCAParamVI: UNSET
dev.ndis.0.StaEDCAParamVO: UNSET
dev.ndis.0.NoAck: UNSET
dev.ndis.0.EnableRxImmBA: UNSET
dev.ndis.0.InactivePs: UNSET
dev.ndis.0.bLeisurePs: UNSET
dev.ndis.0.KeepAliveLevel: UNSET
dev.ndis.0.HT_EnableCck: UNSET
dev.ndis.0.BW40MHz: UNSET
dev.ndis.0.ShortGI20MHz: UNSET
dev.ndis.0.ShortGI40MHz: UNSET
dev.ndis.0.AMSDU: UNSET
dev.ndis.0.AMSDU_MaxSize: UNSET
dev.ndis.0.AMPDUEnable: UNSET
dev.ndis.0.AMPDU_Factor: UNSET
dev.ndis.0.MPDU_Density: UNSET
dev.ndis.0.DisableRateFallBack: UNSET
dev.ndis.0.UseDriverAssingedRate: UNSET
dev.ndis.0.EnableFwCalcDur: UNSET
dev.ndis.0.MimoPs: UNSET
dev.ndis.0.RT2RTAggregation: UNSET
dev.ndis.0.WiFiConfg: UNSET
dev.ndis.0.RegROAMSensitiveLevel: UNSET
dev.ndis.0.RegRoamingLimit: UNSET
dev.ndis.0.RxReorder: UNSET
dev.ndis.0.RxReorder_WinSize: UNSET
dev.ndis.0.RxReorder_PendTime: UNSET
dev.ndis.0.UsbRxFwAggrEn: UNSET
dev.ndis.0.UsbRxFwAggrPageNum: UNSET
dev.ndis.0.UsbRxFwAggrPacketNum: UNSET
dev.ndis.0.UsbRxFwAggrTimeout: UNSET
dev.ndis.0.PacketBufferPage: UNSET
dev.ndis.0.ScanDelay: UNSET
dev.ndis.0.CckPwEnl: UNSET
dev.ndis.0.HalfNMode: UNSET
dev.ndis.0.DisableSilentReset: UNSET
dev.ndis.0.FwRWRF: UNSET
dev.ndis.0.AcceptAddbaReq: UNSET
dev.ndis.0.PNPCapabilities: UNSET
dev.ndis.0.DMInitialGain: UNSET
dev.ndis.0.ShowRate: UNSET
dev.ndis.0.GPIORFSW: UNSET
dev.ndis.0.TKIPinNmode: UNSET
dev.ndis.0.RegTxLowContextCount: UNSET
dev.ndis.0.RegTxHighContextCount: UNSET
dev.ndis.0.InitGainState: UNSET
dev.ndis.0.DIGOfdmFaThreshold: UNSET
dev.ndis.0.CWinMaxMin: UNSET
dev.ndis.0.RegEHCIsp1TxMode: UNSET
dev.ndis.0.MaxBulkInCnt: UNSET
dev.ndis.0.UsbIF: UNSET
dev.ndis.0.ThreeWireMode: UNSET
dev.ndis.0.BoardType: UNSET
dev.ndis.0.PaModel: UNSET
dev.ndis.0.EnableRxStallCheck: UNSET
dev.ndis.0.EnableTxStallFix: UNSET
dev.ndis.0.DIGOfdmHiPwrFaTh: UNSET
dev.ndis.0.DIGOfdmNonHiPwrFaTh: UNSET
dev.ndis.0.Z2HiPwrUpperTh: UNSET
dev.ndis.0.Z2HiPwrLowerTh: UNSET
dev.ndis.0.CCKThMechanism: UNSET
dev.ndis.0.CCKThStage: UNSET
dev.ndis.0.CCKUpperTh: UNSET
dev.ndis.0.CCKLowerTh: UNSET
dev.ndis.0.UsbInTokenRev: UNSET
[root@linbox ~/freebsd/rtl8192/WinXP]# exit
Script done on Wed Oct 19 14:34:37 2011
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAD9pFYDR8pvR-p7oP3Pvm6euEde3v=iRA0Sg8JmCwrg_Uo6aNQ>