Date: Thu, 6 Sep 2001 18:28:40 -0600 From: "Kenneth D. Merry" <ken@kdm.org> To: Ask Bjoern Hansen <ask@valueclick.com> Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: Sony TSL-A500C L100 AIT-2 changer and Amanda Message-ID: <20010906182839.A8968@panzer.kdm.org> In-Reply-To: <Pine.LNX.4.33.0109061715060.26831-100000@impatience.valueclick.com>; from ask@valueclick.com on Thu, Sep 06, 2001 at 05:19:38PM -0700 References: <Pine.LNX.4.33.0109061715060.26831-100000@impatience.valueclick.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 06, 2001 at 17:19:38 -0700, Ask Bjoern Hansen wrote: > Hi, > > I am trying to get this changer to run with amanda on FreeBSD. > dmesg says, > > sa0 at ahc0 bus 0 target 4 lun 0 > sa0: <SONY TSL-A500C L100> Removable Sequential Access SCSI-2 device > sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > pass3 at ahc0 bus 0 target 4 lun 1 > pass3: <SONY TSL-A500C L100> Removable Changer SCSI-2 device > pass3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > > chio gives me > > # chio -f /dev/pass3 status > chio: /dev/pass3: CHIOGPARAMS: Inappropriate ioctl for device > > so I guess that's not the right thing to use? You need the ch(4) driver in your kernel. > mt seems to see the drive on /dev/sa0, > > # mt -f /dev/sa0 status > Mode Density Blocksize bpi Compression > Current: 0x31 variable 0 0x3 > ---------available modes--------- > 0: 0x31 variable 0 0x3 > 1: 0x31 variable 0 0x3 > 2: 0x31 variable 0 0x3 > 3: 0x31 variable 0 0x3 > --------------------------------- > Current Driver State: at rest. > --------------------------------- > File Number: 0 Record Number: 0 Residual Count 1024 > > > Anyone know how to get this going with amanda? Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010906182839.A8968>