Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Feb 2006 22:30:17 +0100
From:      Claude Buisson <cbuisson@nerim.net>
Cc:        stable@freebsd.org, imp@freebsd.org
Subject:   Re: cardbus problem (dc0: MII without any PHY!)
Message-ID:  <43FA34E9.20103@nerim.net>
In-Reply-To: <43FA02AF.2000507@nerim.net>
References:  <43FA02AF.2000507@nerim.net>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------020306040607030900020807
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Claude Buisson wrote:
> Hello,
>
> I tried to upgrade today an old laptop (Compaq Armada 3500), from a
> Jan 29 RELENG_6 to a Feb 19 RELENG_6
>
> As a result of the make installkernel, my Netgear FA5111 card is
> inoperative, and the dmesg shows:
>
> dc0: <Netgear FA511 10/100BaseTX> port 0x1030-0x112f
>   mem 0x88000000-0x880003FF at device 0.0 on cardbus1
> dc0: MII without any PHY!
> device_attach: dc0 attach returned 6
>
> (Note: no irq)
>
> instead of:

>
> carbus1: Ressource not specified in CIS: id=10, size=100
> carbus1: Ressource not specified in CIS: id=14, size=100
> dc0: <Netgear FA511 10/100BaseTX> port 0x1100-0x11ff
>   mem 0x88000000-0x880003FF irq 11 at device 0.0 on cardbus1
> miibus0: <MII bus> on dc0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc0: Ethernet address: ...
> dc0: [GIANT-LOCKED]
>
> Switching for an (older) Xircom CreditCard Ethernet 10/100 succeeds,
> this xe0 card being detected on pccard1 (not cardbus1)
>
> This problem seems to be a consequence of the changes made to
> sys/dev/cardbus/,sys/dev/pci/ on Jan 30.
>
> If needed, do not hesitate to ask me for more tests/infos
>
> TIA
>
> Claude Buisson
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>

Here are 2 verbose dmesg: dmesg.new with the (broken) newer kernel, and
dmesg.old with the (working) previous kernel.

Sorry for not having sent them with the first post

Claude Buisson


--------------020306040607030900020807
Content-Type: text/plain;
 name="dmesg.new"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.new"

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Mon Feb 20 00:56:32 CET 2006
    toor@adeletest.home.tbf:/home/obj/home/src/sys/ARMADA6X
WARNING: debug.mpsafenet forced to 0 as netatm requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0835000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0835138.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc08351e4.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc0835294.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0835340.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc08353ec.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0835498.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc0835544.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc08355f0.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc083569c.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc0835748.
Preloaded elf module "/boot/kernel/apm.ko" at 0xc08357f0.
Preloaded elf module "/boot/kernel/intpm.ko" at 0xc0835898.
Preloaded elf module "/boot/kernel/smbus.ko" at 0xc0835944.
Calibrating clock(s) ... i8254 clock: 1193211 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012590 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201293824 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000bc5ffff, 184791040 bytes (45115 pages)
avail memory = 187592704 (178 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x484
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4d37  Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID 5eb0110e
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00
00 01 20 00 00 01 16 01 00 01 31 01 00 01 4a 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 16 mode(s) found
VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc0793320 (1000040)
VESA: CHIPS 69000 Super VGA
VESA: Chips & Technologies, Inc. 69000 Display Controller 2
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x7192, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base 50000000, size 28, enabled
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001020, size  4, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type 4, range 32, base 00001000, size  5, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[90]: type 4, range 32, base 00000d00, size  4, enabled
found->	vendor=0x102c, dev=0x00c0, revid=0x64
	bus=0, slot=8, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type 1, range 32, base 40000000, size 24, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7fffe000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7ffff000, size 12, enabled
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1020-0x102f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00
intpm0: I/O mapped d00
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus1: <System Management Bus> on intsmb0
intpm0: PM I/O mapped f00
pci0: <display, VGA> at device 8.0 (no driver attached)
cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208
  0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000
  0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208
  0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x2804b060 0x00000000 0x00000000 0x01001c72
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000
  0xa0: 0x7e210001 0x00800000 0x00000001 0x00000007
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 18 devices, largest 250 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0511: adding io range 0x3e8-0x3ef, size=0x8, align=0
PNP0511: adding irq mask 0x10
pnpbios: handle 3 device ID PNP0511 (1105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
ESS0006: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 5 device ID ESS0006 (06007316)
CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0
CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0
CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0
CPQb0ac: adding irq mask 0x20
CPQb0ac: adding dma mask 0x2
CPQb0ac: adding dma mask 0x20
pnpbios: handle 6 device ID CPQb0ac (acb0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x73, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0
PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0
PNP0c02: adding io range 0x260-0x263, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0
PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 19 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
fb: new array size 4
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> on isa0
sc0: VGA <12 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 flags 0x3 on isa0
ppc0: Generic chipset (PS2/NIBBLE) in PS/2 mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
unknown: <PNP0511> can't assign resources (irq)
unknown: <PNP0511> at port 0x3e8-0x3ef irq 4 on isa0
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sbc0: <ESS ES1869 (Compaq OEM)> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,5 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ff4000, 1000; 0xc9dcb000 -> ff4000
pcm0: sndbuf_setmap ff3000, 1000; 0xc9dcc000 -> ff3000
unknown: <PNP0800> failed to probe at port 0x61 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0x8000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00008000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
Device configuration finished.
linprocfs registered
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 300012590 Hz quality -1000
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
unknown: Lazy allocation of 0x400 bytes rid 0x14 type 3 at 0x88000000
	map[10]: type 4, range 32, base 00000000, size  8, port disabled
	map[14]: type 1, range 32, base 88000000, size 10, enabled
found->	vendor=0x1317, dev=0x1985, revid=0x11
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0xa8 (5040 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
dc0: <Netgear FA511 10/100BaseTX> port 0x1030-0x112f mem 0x88000000-0x880003ff at device 0.0 on cardbus1
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1030
dc0: MII without any PHY!
device_attach: dc0 attach returned 6
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 19077MB <HTS548020M9AT00 MG1OA53A> at ata0-master UDMA33
ad0: 39070080 sectors [41344C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: <UJDA150/1.02> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Trying to mount root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
pflog0: bpf attached
nfslock: pseudo-device

--------------020306040607030900020807
Content-Type: text/plain;
 name="dmesg.old"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.old"

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Mon Jan 30 23:49:21 CET 2006
    toor@adeletest.home.tbf:/home/obj/home/src/sys/ARMADA6X
WARNING: debug.mpsafenet forced to 0 as netatm requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0834000.
Preloaded elf module "/boot/kernel.old/vesa.ko" at 0xc0834148.
Preloaded elf module "/boot/kernel.old/linprocfs.ko" at 0xc08341f8.
Preloaded elf module "/boot/kernel.old/procfs.ko" at 0xc08342ac.
Preloaded elf module "/boot/kernel.old/linux.ko" at 0xc083435c.
Preloaded elf module "/boot/kernel.old/if_dc.ko" at 0xc083440c.
Preloaded elf module "/boot/kernel.old/miibus.ko" at 0xc08344bc.
Preloaded elf module "/boot/kernel.old/snd_ess.ko" at 0xc083456c.
Preloaded elf module "/boot/kernel.old/sound.ko" at 0xc083461c.
Preloaded elf module "/boot/kernel.old/snd_sbc.ko" at 0xc08346cc.
Preloaded elf module "/boot/kernel.old/ums.ko" at 0xc083477c.
Preloaded elf module "/boot/kernel.old/apm.ko" at 0xc0834828.
Preloaded elf module "/boot/kernel.old/intpm.ko" at 0xc08348d4.
Preloaded elf module "/boot/kernel.old/smbus.ko" at 0xc0834984.
Calibrating clock(s) ... i8254 clock: 1193229 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012454 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201293824 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000bc5ffff, 184791040 bytes (45115 pages)
avail memory = 187592704 (178 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x484
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4d37  Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID 5eb0110e
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00
00 01 20 00 00 01 16 01 00 01 31 01 00 01 4a 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 16 mode(s) found
VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc0792320 (1000040)
VESA: CHIPS 69000 Super VGA
VESA: Chips & Technologies, Inc. 69000 Display Controller 2
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x7192, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base 50000000, size 28, enabled
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001020, size  4, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type 4, range 32, base 00001000, size  5, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[90]: type 4, range 32, base 00000d00, size  4, enabled
found->	vendor=0x102c, dev=0x00c0, revid=0x64
	bus=0, slot=8, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type 1, range 32, base 40000000, size 24, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7fffe000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7ffff000, size 12, enabled
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1020-0x102f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00
intpm0: I/O mapped d00
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus1: <System Management Bus> on intsmb0
intpm0: PM I/O mapped f00
pci0: <display, VGA> at device 8.0 (no driver attached)
cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208
  0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000
  0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208
  0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x2804b060 0x00000000 0x00000000 0x01001c72
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000
  0xa0: 0x7e210001 0x00800000 0x00000001 0x00000007
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 18 devices, largest 250 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0511: adding io range 0x3e8-0x3ef, size=0x8, align=0
PNP0511: adding irq mask 0x10
pnpbios: handle 3 device ID PNP0511 (1105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
ESS0006: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 5 device ID ESS0006 (06007316)
CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0
CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0
CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0
CPQb0ac: adding irq mask 0x20
CPQb0ac: adding dma mask 0x2
CPQb0ac: adding dma mask 0x20
pnpbios: handle 6 device ID CPQb0ac (acb0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x73, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0
PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0
PNP0c02: adding io range 0x260-0x263, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0
PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 19 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
fb: new array size 4
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> on isa0
sc0: VGA <12 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 flags 0x3 on isa0
ppc0: Generic chipset (PS2/NIBBLE) in PS/2 mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
unknown: <PNP0511> can't assign resources (irq)
unknown: <PNP0511> at port 0x3e8-0x3ef irq 4 on isa0
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sbc0: <ESS ES1869 (Compaq OEM)> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,5 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ff4000, 1000; 0xc9dcb000 -> ff4000
pcm0: sndbuf_setmap ff3000, 1000; 0xc9dcc000 -> ff3000
unknown: <PNP0800> failed to probe at port 0x61 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0x8000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00008000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
Device configuration finished.
linprocfs registered
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 300012454 Hz quality -1000
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: Resource not specified in CIS: id=14, size=400
found->	vendor=0x1317, dev=0x1985, revid=0x11
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0xa8 (5040 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
dc0: <Netgear FA511 10/100BaseTX> port 0x1100-0x11ff mem 0x88000000-0x880003ff irq 11 at device 0.0 on cardbus1
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100
dc0: Reserved 0x1 bytes for rid 0 type 1 at 0xb
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:0f:b5:48:90:06
dc0: [GIANT-LOCKED]
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 19077MB <HTS548020M9AT00 MG1OA53A> at ata0-master UDMA33
ad0: 39070080 sectors [41344C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: <UJDA150/1.02> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Trying to mount root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
pflog0: bpf attached
nfslock: pseudo-device

--------------020306040607030900020807--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43FA34E9.20103>