Date: Thu, 10 Apr 2003 21:26:04 -0700 (PDT) From: iCe <ice799@yahoo.com> To: freebsd-mobile@freebsd.org Subject: orinoco gold card question :update on problem Message-ID: <20030411042604.12630.qmail@web41511.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hey, I read on some site or mailing list archive (maybe even the one for this site) that to get /dev/card0 back (the device that my system couldnt find) you'd have to compile OLDCARD and build/install that kernel. so i did, and well it worked. kinda. /dev/card0 exists, and pccard does not complain of not finding it at startup. instead pccardc complains "invalid argument" it looks to me like somewhere pccardc is told to set the memory for the card and its doing it wrong. but i dunno where or how to fix this. my dmesg -a output is attached below, if anyone could give me a hand it would be incredibly appreciated. Thanks, Joe Damato ice799@yahoo.com dmesg -a output: acpi_cmbat0: <Control method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 10 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 3 INTA is routed to irq 11 pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2 pcic0: PCI Memory allocated: 0xe8200000 pccard0: <PC Card 16-bit bus (classic)> on pcic0 Allocating major#250 to "crd" pci2: <serial bus, FireWire> at device 3.1 (no driver attached) fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff irq 10 at device 8.0 on pci2 fxp0: Ethernet address 00:00:f0:76:88:db miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xd0000-0xd3fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec system power profile changed to 'economy' Allocating major#249 to "devstat" ad0: 28615MB <FUJITSU MHR2030AT> [58140/16/63] at ata0-master UDMA100 acd0: CD-RW <Samsung CD-RW/DVD-ROM SN-308B> at ata1-master PIO4 /etc/rc: WARNING: $kldxref_enable is not set properly - see rc.conf(5). Setup PC-CARD: pccardc: ioctl (PIOCRWMEM) : Invalid argument beep pccardd . Doing initial network setup: hostname . fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::200:f0ff:fe76:88db%fxp0 prefixlen 64 tentative scopeid 0x1 inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:00:f0:76:88:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 Additional routing options: . hw.bus.devctl_disable: 0 -> 1 Mounting NFS file systems: . __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030411042604.12630.qmail>