Date: Sun, 23 Feb 2014 21:03:32 +0000 (UTC) From: Marius Strobl <marius@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-9@freebsd.org Subject: svn commit: r262390 - stable/9/sys/pci Message-ID: <201402232103.s1NL3W3b029823@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marius Date: Sun Feb 23 21:03:32 2014 New Revision: 262390 URL: http://svnweb.freebsd.org/changeset/base/262390 Log: MFC: r261529 Try to make the style used here consistent. Modified: stable/9/sys/pci/if_rlreg.h Directory Properties: stable/9/sys/ (props changed) Modified: stable/9/sys/pci/if_rlreg.h ============================================================================== --- stable/9/sys/pci/if_rlreg.h Sun Feb 23 21:03:30 2014 (r262389) +++ stable/9/sys/pci/if_rlreg.h Sun Feb 23 21:03:32 2014 (r262390) @@ -163,7 +163,6 @@ #define RL_LOOPTEST_ON_CPLUS 0x00060000 /* Known revision codes. */ - #define RL_HWREV_8169 0x00000000 #define RL_HWREV_8169S 0x00800000 #define RL_HWREV_8110S 0x04000000 @@ -329,8 +328,8 @@ #define RL_RXSTAT_INDIV 0x00004000 #define RL_RXSTAT_MULTI 0x00008000 #define RL_RXSTAT_LENMASK 0xFFFF0000 +#define RL_RXSTAT_UNFINISHED 0x0000FFF0 /* DMA still in progress */ -#define RL_RXSTAT_UNFINISHED 0xFFF0 /* DMA still in progress */ /* * Command register. */ @@ -361,6 +360,7 @@ #define RL_PARA7C 0x7C #define RL_PARA7C_DEF 0xcb38de43 #define RL_PARA7C_RETUNE 0xfb38de03 + /* * EEPROM control register */ @@ -473,11 +473,9 @@ */ /* RL_DUMPSTATS_LO register */ - #define RL_DUMPSTATS_START 0x00000008 /* Transmit start register */ - #define RL_TXSTART_SWI 0x01 /* generate TX interrupt */ #define RL_TXSTART_START 0x40 /* start normal queue transmit */ #define RL_TXSTART_HPRIO_START 0x80 /* start hi prio queue transmit */ @@ -496,7 +494,6 @@ #define RL_BUSWIDTH_64BITS 0x08 /* C+ mode command register */ - #define RL_CPLUSCMD_TXENB 0x0001 /* enable C+ transmit mode */ #define RL_CPLUSCMD_RXENB 0x0002 /* enable C+ receive mode */ #define RL_CPLUSCMD_PCI_MRW 0x0008 /* enable PCI multi-read/write */ @@ -514,7 +511,6 @@ #define RL_CPLUSCMD_BIST_ENB 0x8000 /* 8168C/CP */ /* C+ early transmit threshold */ - #define RL_EARLYTXTHRESH_CNT 0x003F /* byte count times 8 */ /* Timer interrupt register */ @@ -528,7 +524,6 @@ /* * Gigabit PHY access register (8169 only) */ - #define RL_PHYAR_PHYDATA 0x0000FFFF #define RL_PHYAR_PHYREG 0x001F0000 #define RL_PHYAR_BUSY 0x80000000 @@ -559,7 +554,6 @@ * For reception, there's just one large buffer where the chip stores * all received packets. */ - #define RL_RX_BUF_SZ RL_RXBUF_64 #define RL_RXBUFLEN (1 << ((RL_RX_BUF_SZ >> 11) + 13)) #define RL_TX_LIST_CNT 4 @@ -642,11 +636,10 @@ struct rl_hwrev { /* * RX/TX descriptor definition. When large send mode is enabled, the - * lower 11 bits of the TX rl_cmd word are used to hold the MSS, and + * lower 11 bits of the TX rl_cmdstat word are used to hold the MSS, and * the checksum offload bits are disabled. The structure layout is * the same for RX and TX descriptors */ - struct rl_desc { uint32_t rl_cmdstat; uint32_t rl_vlanctl; @@ -679,7 +672,6 @@ struct rl_desc { * Error bits are valid only on the last descriptor of a frame * (i.e. RL_TDESC_CMD_EOF == 1) */ - #define RL_TDESC_STAT_COLCNT 0x000F0000 /* collision count */ #define RL_TDESC_STAT_EXCESSCOL 0x00100000 /* excessive collisions */ #define RL_TDESC_STAT_LINKFAIL 0x00200000 /* link faulure */ @@ -691,7 +683,6 @@ struct rl_desc { /* * RX descriptor cmd/vlan definitions */ - #define RL_RDESC_CMD_EOR 0x40000000 #define RL_RDESC_CMD_OWN 0x80000000 #define RL_RDESC_CMD_BUFLEN 0x00001FFF
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201402232103.s1NL3W3b029823>