Date: Sat, 20 Mar 2004 20:01:15 -0600 From: Derek Ragona <derek@computinginnovations.com> To: freebsd-current@freebsd.org Subject: Re: SATA raid freebsd Message-ID: <6.0.0.22.2.20040320195343.01ee9938@www.computinginnovations.com> In-Reply-To: <20040320193733.GA22361@goodwill.hu> References: <20040320141856.GB15808@goodwill.hu> <6.0.0.22.2.20040320085513.01e5c910@www.computinginnovations.com> <20040320193733.GA22361@goodwill.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
That motherboard has two versions, one with just a 2-port SATA/RAID on ICH5=
=20
and another with an additional 4-port SATA/RAID from Promise.
I know the Promise RAID controllers are better supported by FreeBSD, so it=
=20
may be if you are using the ICH5 RAID may not be supported by FreeBSD. You=
=20
should probably check with S=F8ren Schmidt on what RAID is supported.
-Derek
At 01:37 PM 3/20/2004, =3D?iso-8859-2?Q?G=3DE9czi?=3D Szabolcs wrote:
>On Sat, Mar 20, 2004 at 08:55:30AM -0600, Derek Ragona wrote:
> > You need to enable the channels you want to use for RAID, the utility=20
> is on
> > the intel website. Then make your array in the firmware utility.
> >
> > Only after you have the array created, do you go on and install an OS.
> >
> > -Derek
> >
>
>as a matter of fact I couldn't install OS to the array.
>because the freebsd installer couldn't see the array...
>
>--
>G=E9czi Szabolcs
>GPG: http://www.goodwill.hu/~szabszi/szabszi.asc
>Fingerprint: B36C 150C C316 5A15 DB5F 183A 303B 5AEB 36C2 3162
>_______________________________________________
>freebsd-current@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20040320195343.01ee9938>