Date: Sun, 02 Dec 2018 21:20:59 +0000 From: bugzilla-noreply@freebsd.org To: ppc@FreeBSD.org Subject: [Bug 233579] FreeBSD 12.0-RC2 r340839 GENERIC powerpc needs kern.smp.disabled=1 to boot after install Message-ID: <bug-233579-21-UtuNFhokbU@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-233579-21@https.bugs.freebsd.org/bugzilla/>
index | next in thread | previous in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233579 --- Comment #3 from Dennis Clarke <dclarke@blastwave.org> --- Well here is an update after talking with Justin Hibbits. The idea on the table was to try a boot with usefdt=1 which : ... forces the loader to generate a device tree from the openfirmware tree, and never call into open firmware from the kernel Sound reasonable. System boots and runs just fine : eris# eris# setenv LINES '43' eris# setenv COLUMNS '132' eris# setenv TERM vt100 eris# eris# uname -aU FreeBSD eris 12.0-RC3 FreeBSD 12.0-RC3 r341271 GENERIC powerpc 1200086 eris# uptime 9:07PM up 3 mins, 1 user, load averages: 0.14, 0.19, 0.08 eris# sysctl hw.ncpu hw.ncpu: 4 eris# getconf -a | grep 'NPROC' getconf: sysconf: _POSIX_FILE_LOCKING: Invalid argument getconf: sysconf: _POSIX_THREAD_SPORADIC_SERVER: Invalid argument getconf: sysconf: _POSIX_TRACE_EVENT_FILTER: Invalid argument getconf: sysconf: _POSIX_TRACE_INHERIT: Invalid argument getconf: sysconf: _POSIX_TRACE_LOG: Invalid argument getconf: sysconf: _XOPEN_VERSION: Invalid argument NPROCESSORS_CONF: 4 NPROCESSORS_ONLN: 4 eris# dmesg ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RC3 r341271 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1280x1024 Preloaded elf kernel "/boot/kernel/kernel" at 0x1be3000. Preloaded boot_entropy_cache "/boot/entropy" at 0x1be3ed8. cpu0: IBM PowerPC 970MP revision 1.1, 2500.38 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory = 8542404608 (8146 MB) available KVA = 34359590911 (32767 MB) Physical memory chunk(s): 0x0000000000025000 - 0x00000000000fffff, 897024 bytes (219 pages) 0x0000000001c61000 - 0x0000000002bfffff, 16379904 bytes (3999 pages) 0x000000000524e000 - 0x0000000007ffffff, 47915008 bytes (11698 pages) 0x0000000010000000 - 0x000000007f5effff, 1868496896 bytes (456176 pages) 0x0000000100000000 - 0x000000027490afff, 6250606592 bytes (1526027 pages) avail memory = 8152752128 (7775 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0: dev=ff89d680 (BSP) cpu1: dev=ff89eb70 cpu2: dev=ff89f248 cpu3: dev=ff89f920 random: read 3840 bytes from preloaded cache random: unblocking device. arc4random: read 32 bytes from preloaded cache VIMAGE (virtualized network stack) enabled ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 't5fw_cfg' version 0: 6030 bytes loaded at 0x114a270 firmware: 't5fw_cfg_uwire' version 0: 21942 bytes loaded at 0x114b9fe firmware: 't5fw' version 0: 651776 bytes loaded at 0x1150fb4 random: entropy device external interface firmware: 't6fw_cfg' version 0: 6047 bytes loaded at 0x11f01d0 firmware: 't6fw_cfg_uwire' version 0: 21908 bytes loaded at 0x11f196f firmware: 't6fw' version 0: 698368 bytes loaded at 0x11f6f03 firmware: 't4fw_cfg' version 0: 4651 bytes loaded at 0x10bc80c firmware: 't4fw_cfg_uwire' version 0: 21532 bytes loaded at 0x10bda37 firmware: 't4fw' version 0: 553984 bytes loaded at 0x10c2e53 firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xe7c000 firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xe819a0 firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xe89416 firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xe901a8 firmware: 'isp_2200' version 1: 84566 bytes loaded at 0xea2d8a firmware: 'isp_2300' version 1: 125252 bytes loaded at 0xeb77e0 firmware: 'isp_2322' version 1: 120814 bytes loaded at 0xed6124 firmware: 'isp_2400' version 1: 204396 bytes loaded at 0xef748c firmware: 'isp_2500' version 1: 218712 bytes loaded at 0xf380e0 nfslock: pseudo-device kbd0 at kbdmux0 mem: <memory> null: <full device, null device, zero device> openfirm: <Open Firmware control device> ofwbus0: <Open Firmware Device Tree> on nexus0 ofwbus0: Malformed reg property on <smu> cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu0: Nominal frequency 2500Mhz pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu1: Nominal frequency 2500Mhz pcr1: <PPC 970 Power Control Register> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 cpu2: Nominal frequency 2500Mhz pcr2: <PPC 970 Power Control Register> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 cpu3: Nominal frequency 2500Mhz pcr3: <PPC 970 Power Control Register> on cpu3 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 452, bank1 generation 453 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0 unin0: Version 66 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 unin mapdev: start f8001000, len 4095 iichb0: Revision: A2 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 unin0: <dart, dart> mem 0xf8033000-0xf803bfff (no driver attached) htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 unin mapdev: start f8040000, len 262143 htpic0: Version 1.2, supports 4 CPUs and 124 irqs pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 pci0: domain=0, physical bus=10 found-> vendor=0x10de, dev=0x0141, revid=0xa2 domain=0, bus=10, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xa1000000, size 24, enabled map[14]: type Prefetchable Memory, range 64, base 0x90000000, size 28, enabled map[1c]: type Memory, range 64, base 0xa0000000, size 24, enabled vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pci1: domain=1, physical bus=0 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=1, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=1, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=1, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=1, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=1, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=1, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x106b, dev=0x0053, revid=0x00 domain=1, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x106b, dev=0x0054, revid=0x00 domain=1, bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x106b, dev=0x0055, revid=0x00 domain=1, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pcib2: domain 1 pcib2: secondary bus 4 pcib2: subordinate bus 4 pci2: <OFW PCI bus> on pcib2 pci2: domain=1, physical bus=4 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pcib3: domain 1 pcib3: secondary bus 5 pcib3: subordinate bus 5 pcib3: memory decode 0xfa500000-0xfa5fffff pci3: <OFW PCI bus> on pcib3 pci3: domain=1, physical bus=5 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=1, bus=5, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfa530000, size 16, enabled pcib3: allocated memory range (0xfa530000-0xfa53ffff) for rid 10 of pci1:5:4:0 map[18]: type Memory, range 64, base 0xfa520000, size 16, enabled pcib3: allocated memory range (0xfa520000-0xfa52ffff) for rid 18 of pci1:5:4:0 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=1, bus=5, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfa510000, size 16, enabled pcib3: allocated memory range (0xfa510000-0xfa51ffff) for rid 10 of pci1:5:4:1 map[18]: type Memory, range 64, base 0xfa500000, size 16, enabled pcib3: allocated memory range (0xfa500000-0xfa50ffff) for rid 18 of pci1:5:4:1 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 ofw_pci mapdev: start fa530000, len 65536 bge0: attempting to allocate 1 MSI vectors (8 supported) bge0: using IRQ 8 for MSI bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz bge0: NVRAM lock timedout! miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: OUI 0x001018, model 0x0035, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:14:51:64:67:10 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 ofw_pci mapdev: start fa510000, len 65536 bge1: attempting to allocate 1 MSI vectors (8 supported) bge1: using IRQ 9 for MSI bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz bge1: NVRAM lock timedout! miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: OUI 0x001018, model 0x0035, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:14:51:64:67:11 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pcib4: domain 1 pcib4: secondary bus 6 pcib4: subordinate bus 6 pci4: <OFW PCI bus> on pcib4 pci4: domain=1, physical bus=6 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pcib5: domain 1 pcib5: secondary bus 7 pcib5: subordinate bus 7 pci5: <OFW PCI bus> on pcib5 pci5: domain=1, physical bus=7 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pcib6: domain 1 pcib6: secondary bus 8 pcib6: subordinate bus 8 pci6: <OFW PCI bus> on pcib6 pci6: domain=1, physical bus=8 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pcib7: domain 1 pcib7: secondary bus 9 pcib7: subordinate bus 9 pci7: <OFW PCI bus> on pcib7 pci7: domain=1, physical bus=9 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pcib8: domain 1 pcib8: secondary bus 2 pcib8: subordinate bus 2 pcib8: memory decode 0xfa000000-0xfa3fffff pci8: <OFW PCI bus> on pcib8 pci8: domain=1, physical bus=2 found-> vendor=0x106b, dev=0x0051, revid=0x00 domain=1, bus=2, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x84a0, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0xfa200000, size 21, memory disabled pcib8: allocated memory range (0xfa200000-0xfa3fffff) for rid 10 of pci1:2:15:0 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on pci8 pcib8: slot 15 INTA is routed to irq 4 ofw_pci mapdev: start fa200000, len 2097152 gem0: invalid MAC address device_attach: gem0 attach returned 6 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pcib9: domain 1 pcib9: secondary bus 1 pcib9: subordinate bus 1 pcib9: memory decode 0x80000000-0x800fffff pci9: <OFW PCI bus> on pcib9 pci9: domain=1, physical bus=1 found-> vendor=0x106b, dev=0x004f, revid=0x00 domain=1, bus=1, slot=7, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0x80000000, size 19, enabled pcib9: allocated memory range (0x80000000-0x8007ffff) for rid 10 of pci1:1:7:0 found-> vendor=0x1033, dev=0x0035, revid=0x43 domain=1, bus=1, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80082000, size 12, memory disabled pcib9: allocated memory range (0x80082000-0x80082fff) for rid 10 of pci1:1:11:0 found-> vendor=0x1033, dev=0x0035, revid=0x43 domain=1, bus=1, slot=11, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80081000, size 12, memory disabled pcib9: allocated memory range (0x80081000-0x80081fff) for rid 10 of pci1:1:11:1 found-> vendor=0x1033, dev=0x00e0, revid=0x04 domain=1, bus=1, slot=11, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x10 (480 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80080000, size 8, memory disabled pcib9: allocated memory range (0x80080000-0x800800ff) for rid 10 of pci1:1:11:2 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci9 ofw_pci mapdev: start 80000000, len 524288 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 macgpio0: <gpio, smu-interrupt> gpio 13 irq 48 (no driver attached) macgpio0: <gpio, programmer-switch> gpio 12 irq 47 (no driver attached) macgpio0: <gpio, chip-fault> gpio 14 irq 49 (no driver attached) macgpio0: <gpio, slewing-done> gpio 56 irq 91 (no driver attached) macgpio0: <gpio, mlb-good> gpio 19 (no driver attached) macgpio0: <gpio, vdnap0> gpio 20 (no driver attached) macgpio0: <gpio, timebase-enable> gpio 38 irq 73 (no driver attached) macgpio0: <gpio, dig-hw-reset-c> gpio 9 (no driver attached) macgpio0: <gpio, codec-error-irq> gpio 50 irq 85 (no driver attached) macgpio0: <gpio, codec-clock-mux> gpio 49 (no driver attached) macgpio0: <gpio, linein-detect> gpio 42 irq 77 (no driver attached) scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 scc0: resetting hardware uart0: <z8530, channel A> on scc0 uart0: fast interrupt uart0: PPS capture mode: DCD uart1: <z8530, channel B> on scc0 uart1: fast interrupt uart1: PPS capture mode: DCD scc0: fast interrupt iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iichb1: Revision: A1 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci9 ofw_pci mapdev: start 80082000, len 4096 usbus0 on ohci0 ohci0: usbpf: Attached ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci9 ofw_pci mapdev: start 80081000, len 4096 usbus1 on ohci1 ohci1: usbpf: Attached ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci9 ofw_pci mapdev: start 80080000, len 256 usbus2: EHCI version 1.0 usbus2 on ehci0 ehci0: usbpf: Attached pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pcib10: domain 1 pcib10: secondary bus 3 pcib10: subordinate bus 3 pcib10: memory decode 0xfa400000-0xfa4fffff pci10: <OFW PCI bus> on pcib10 pci10: domain=1, physical bus=3 found-> vendor=0x1166, dev=0x0240, revid=0x00 domain=1, bus=3, slot=12, func=0 class=01-01-8f, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0, size 3, port disabled map[14]: type I/O Port, range 32, base 0, size 2, port disabled map[18]: type I/O Port, range 32, base 0, size 3, port disabled map[1c]: type I/O Port, range 32, base 0, size 2, port disabled map[20]: type I/O Port, range 32, base 0, size 4, port disabled map[24]: type Memory, range 32, base 0xfa402000, size 13, enabled pcib10: allocated memory range (0xfa402000-0xfa403fff) for rid 24 of pci1:3:12:0 found-> vendor=0x106b, dev=0x0050, revid=0x00 domain=1, bus=3, slot=13, func=0 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x8200, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0xfa404000, size 14, memory disabled pcib10: allocated memory range (0xfa404000-0xfa407fff) for rid 10 of pci1:3:13:0 found-> vendor=0x106b, dev=0x0052, revid=0x00 domain=1, bus=3, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfa400000, size 12, memory disabled pcib10: allocated memory range (0xfa400000-0xfa400fff) for rid 10 of pci1:3:14:0 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 pcib10: failed to allocate initial I/O port window (0-0xffffffff,0x10) atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ofw_pci mapdev: start fa402000, len 8192 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 ofw_pci mapdev: start fa404000, len 16384 fwohci0: vendor=106b, dev=52 fwohci0: vendor=106b, dev=52 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39 at device 14.0 on pci10 ofw_pci mapdev: start fa400000, len 4096 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 fwe0: bpf attached fwe0: Ethernet address: 02:11:24:e5:13:d0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound = 0x00000000 fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, CYCLEMASTER mode smu0: <Apple System Management Unit> on ofwbus0 smu0: Fan: DRIVE BAY A INTAKE type: 0 smu0: Fan: BACKSIDE type: 0 smu0: Fan: CPU A INTAKE type: 0 smu0: Fan: CPU B INTAKE type: 0 smu0: Fan: CPU A EXHAUST type: 0 smu0: Fan: CPU B EXHAUST type: 0 smu0: Fan: CPU A PUMP type: 0 smu0: Fan: EXPANSION SLOTS INTAKE type: 0 smu0: registered as a time-of-day clock, resolution 0.001000s iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 procfs registered Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) firewire0: bus manager 1 bge0: link state changed to UP usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 lo0: bpf attached arc4random: read 32 bytes from preloaded cache arc4random: read 32 bytes from preloaded cache arc4random: read 32 bytes from preloaded cache tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 max66900: 2 sensors detected. max66900: Sensors max66900: Location : BACKSIDE ID: 6 max66900: Location : KODIAK DIODE ID: 7 max66901: 2 sensors detected. max66901: Sensors max66901: Location : TUNNEL ID: 1 max66901: Location : TUNNEL HEATSINK ID: 2 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus2: 480Mbps High Speed USB v2.0 ata2: hard reset ... ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ata2: SATA connect time=10ms status=00000113 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: hard reset ... ata3: SATA connect time=0ms status=00000113 ata3: reset tp1 mask=01 ostat0=d0 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 uhub0: 2 ports with 2 removable, self powered ata4: hard reset ... uhub1: 3 ports with 3 removable, self powered ata4: SATA connect timeout status=00000000 ata5: hard reset ... ata5: SATA connect timeout status=00000000 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 pcm0: Mixer "vol": uhub2: 5 ports with 5 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device ada0: Serial Number KRVN23ZAHA5DBD ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) GEOM: new disk cd0 GEOM: new disk ada0 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <ST3250823AS 3.03> ATA-7 SATA 1.x device ada1: Serial Number 5ND1HQX1 ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 238475MB (488397168 512 byte sectors) pass0 at ata2 bus 0 scbus0 target 0 lun 0 pass0: <Hitachi HDS725050KLA360 K2ABC20A> ATA-7 SATA 1.x device pass0: Serial Number KRVN23ZAHA5DBD cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device cd0: Serial Number M0063NE3358 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: 4482MB (2295104 2048 byte sectors) pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass1 at ata3 bus 0 scbus1 target 0 lun 0 pass1: <ST3250823AS 3.03> ATA-7 SATA 1.x device pass1: Serial Number 5ND1HQX1 pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass2 at ata0 bus 0 scbus4 target 0 lun 0 pass2: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device pass2: Serial Number M0063NE3358 pass2: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 Adding CPU 0, hwref=ff89d680, awake=1 Waking up CPU 1 (dev=ff89eb70) Adding CPU 1, hwref=ff89eb70, awake=1 Waking up CPU 2 (dev=ff89f248) Adding CPU 2, hwref=ff89f248, awake=1 Waking up CPU 3 (dev=ff89f920) Adding CPU 3, hwref=ff89f920, awake=1 SMP: AP CPU #1 launched SMP: AP CPU #2 launched SMP: AP CPU #3 launched Trying to mount root from ufs:/dev/ada0s3 [rw]... ukbd0 on uhub0 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0 on uhub0 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 GEOM: new disk ada1 smu0: providing initial system time start_init: trying /sbin/init lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP module_register: cannot register gem/miibus from if_gem.ko; already loaded from kernel Module gem/miibus failed to register: 17 module_register: cannot register pci/gem from if_gem.ko; already loaded from kernel Module pci/gem failed to register: 17 eris# eris# eris# dmesg > foo eris# diff foo /var/run/dmesg.boot 541,544d540 < module_register: cannot register gem/miibus from if_gem.ko; already loaded from kernel < Module gem/miibus failed to register: 17 < module_register: cannot register pci/gem from if_gem.ko; already loaded from kernel < Module pci/gem failed to register: 17 eris# I will try again without kern.smp.disabled and also without usefdt=1 and see what happens. -- You are receiving this mail because: You are the assignee for the bug.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-233579-21-UtuNFhokbU>