Date: Wed, 8 Oct 2025 19:46:20 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: imp@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26926 - Still Failing Message-ID: <138668645.577.1759952780864@jenkins.ci.freebsd.org> In-Reply-To: <614892598.575.1759948014194@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26926 (86becbd8c1ce4393f4e35a9fa6b0e8308f500396) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 86becbd8c1ce4393f4e35a9fa6b0e8308f500396 by imp: Revert "cam/iosched: Initialize max_lat" The end of the build log: [...truncated 3.91 MiB...] epair0b: link state changed to UP epair1a: Ethernet address: 0a:25:20:4e:bf:84 epair1b: Ethernet address: 9e:4c:e5:5f:a5:b7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.311s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: da:b5:c9:bd:7a:61 epair0b: Ethernet address: 16:aa:de:e6:1e:79 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: be:53:b8:03:ef:bf epair1b: Ethernet address: 0e:c4:0e:12:57:99 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.239s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 7e:ec:84:f4:f5:1c epair0b: Ethernet address: 96:1d:01:23:e5:f8 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4e:84:75:9f:66:5a epair1b: Ethernet address: 7a:b4:19:90:d7:a7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.228s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: fa:ab:19:db:68:1a epair0b: Ethernet address: ae:50:85:10:54:7a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 0e:03:b2:c9:53:e7 epair1b: Ethernet address: 3e:9f:4e:b4:fc:75 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.238s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 2e:fd:e6:0f:74:78 epair0b: Ethernet address: 9a:97:aa:51:f9:08 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 2a:84:e6:72:b9:91 epair1b: Ethernet address: 96:2f:fc:d1:ad:38 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.237s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: e2:8d:ca:4b:76:51 epair0b: Ethernet address: f6:d0:93:c6:6c:42 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 0a:75:28:8f:68:50 epair1b: Ethernet address: be:c8:11:0c:2f:ce epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.239s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 5a:f3:32:f5:4d:33 epair0b: Ethernet address: 56:15:71:91:42:e3 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 6e:d8:27:a0:49:45 epair1b: Ethernet address: d6:d8:75:c1:f4:e7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.238s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 56:81:b9:dd:03:26 epair0b: Ethernet address: ce:51:e5:e9:c3:22 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: fa:86:c4:97:99:9b epair1b: Ethernet address: e6:5f:bc:f1:17:ab epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.239s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 06:35:a8:39:35:c2 epair0b: Ethernet address: d2:e6:ef:18:48:2a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 72:54:dc:cb:96:ef epair1b: Ethernet address: 0e:06:bd:58:a2:71 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 2e:22:de:a0:21:0d epair2b: Ethernet address: 56:77:fc:91:f5:22 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.340s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 6e:56:36:ba:32:b0 epair0b: Ethernet address: d6:00:49:3e:75:c1 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: de:ba:8b:8b:0e:21 epair1b: Ethernet address: e2:15:f4:c6:a8:9c epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: f2:77:99:75:51:8f epair2b: Ethernet address: 42:c3:70:0e:b4:75 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.065s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 06:b4:ef:1e:42:76 epair0b: Ethernet address: b6:cf:fa:b3:c3:49 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4e:a4:74:20:6c:d2 epair1b: Ethernet address: 42:dd:b6:09:0a:9e epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 0a:76:c8:bf:6c:66 epair2b: Ethernet address: 9a:14:e9:c2:55:07 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512) cpuid = 1 time = 1759952779 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820 vpanic() at vpanic+0x136/frame 0xfffffe008baf0950 panic() at panic+0x43/frame 0xfffffe008baf09b0 in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00 fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30 ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60 ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80 ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10 ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0 ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0 pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00 ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0 swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60 ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 12 tid 100033 ] Stopped at kdb_enter+0x33: movq $0,0x121da42(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 1 dynamic pcpu = 0xfffffe008d1c25c0 curthread = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0" curpcb = 0xfffff80004628cd0 fpcurthread = none idlethread = 0xfffff8000460b000: tid 100004 "idle: cpu1" self = 0xffffffff82611000 curpmap = 0xffffffff81d9f520 tssp = 0xffffffff82611384 rsp0 = 0xfffffe008baf1000 kcr3 = 0x800000000259b002 ucr3 = 0xffffffffffffffff scr3 = 0x11873ed02 gs32p = 0xffffffff82611404 ldt = 0xffffffff82611444 tss = 0xffffffff82611434 curvnet = 0xfffff80145a79600 spin locks held: db:0:kdb.enter.panic> reset Uptime: 1h18m6s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26926' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run-kyua.sh x ./auto-shutdown x ./disable-zfs-tests.sh x ./disable-dtrace-tests.sh x ./run.sh x ./disable-notyet-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins13592016313009707805.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '86becbd8c1ce4393f4e35a9fa6b0e8308f500396', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../86becbd8c1ce4393f4e35a9fa6b0e8308f500396/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?138668645.577.1759952780864>