Date: Sat, 25 Sep 1999 11:32:56 -0400 (EDT) From: jedgar@fxp.org To: FreeBSD-gnats-submit@freebsd.org Subject: docs/13946: Various updates to handbook/kernelconfig/chapter.sgml Message-ID: <19990925153256.33AE7F80F@pawn.primelocation.net>
index | next in thread | raw e-mail
>Number: 13946
>Category: docs
>Synopsis: Various updates to handbook/kernelconfig/chapter.sgml
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-doc
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: doc-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Sep 25 08:40:01 PDT 1999
>Closed-Date:
>Last-Modified:
>Originator: Chris D. Faulhaber
>Release: FreeBSD 3.3-STABLE i386
>Organization:
BUGO - BSD Users Group of Orlando
>Environment:
FreeBSD 3.3-STABLE i386
>Description:
Various fixes to handbook/kernelconfig/chapter.sgml:
* Removed obsolete BOUNCE_BUFFERS reference
* Added eisa0 reference to basic controllers
* Changed wcd0 references to acd0
* Added ch0 and pass0 devices to SCSI device support
* Changed obsolete lpt0 reference to ppbus/ppc/lpt
* Added pcm to sound devices that do not require snd0
>How-To-Repeat:
RTFM^HHB :)
>Fix:
Index: doc/en_US.ISO_8859-1/books/handbook/kernelconfig/chapter.sgml
===================================================================
RCS file: /home/ncvs/doc/en_US.ISO_8859-1/books/handbook/kernelconfig/chapter.sgml,v
retrieving revision 1.20
diff -c -r1.20 chapter.sgml
*** chapter.sgml 1999/09/06 06:52:59 1.20
--- chapter.sgml 1999/09/25 15:27:11
***************
*** 404,420 ****
</varlistentry>
<varlistentry>
- <term><literal>options BOUNCE_BUFFERS</literal></term>
-
- <listitem>
- <para>ISA devices and EISA devices operating in an ISA
- compatibility mode can only perform DMA (Direct Memory Access)
- to memory below 16 megabytes. This option enables such devices
- to work in systems with more than 16 megabytes of memory.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
<term><literal>options UCONSOLE</literal></term>
<listitem>
--- 404,409 ----
***************
*** 613,618 ****
--- 602,616 ----
</varlistentry>
<varlistentry>
+ <term><literal>controller eisa0</literal></term>
+ <listitem>
+ <para>Include this if you have an EISA motherboard. This enables
+ auto-detection and configuration support for all devices on the
+ EISA bus.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><literal>controller pci0</literal></term>
<listitem>
***************
*** 656,662 ****
</varlistentry>
<varlistentry>
! <term><literal>device wcd0<anchor
id="kernelconfig-atapi"></literal></term>
<listitem>
--- 654,660 ----
</varlistentry>
<varlistentry>
! <term><literal>device acd0<anchor
id="kernelconfig-atapi"></literal></term>
<listitem>
***************
*** 895,900 ****
--- 893,915 ----
<listitem>
<para>Support for SCSI CD-ROM drives.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><literal>device ch0</literal></term>
+
+ <listitem>
+ <para>Support for SCSI media changers such
+ as tape libraries.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><literal>device pass0</literal></term>
+
+ <listitem>
+ <para>CAM passthrough driver.</para>
<para>Note that the number <literal>0</literal> in the above
entries is slightly misleading: all these devices are
***************
*** 1108,1122 ****
</listitem>
</varlistentry>
<varlistentry>
! <term><literal>device lpt0 at isa? port? tty irq 7 vector
! lptintr</literal></term>
<listitem>
! <para><literal>lpt0</literal> through <literal>lpt2</literal> are
! the three printer ports you could conceivably have. Most people
! just have one, though, so feel free to comment out the other two
! lines if you do not have them.</para>
</listitem>
</varlistentry>
</variablelist>
--- 1123,1154 ----
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><literal>controller ppbus0</literal></term>
+
+ <listitem>
+ <para>Provides support for the parallel port bus.</para>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
! <term><literal>device ppc0 at isa? port? tty irq 7</literal></term>
<listitem>
! <para>ISA-bus parallel port interface.</para>
! </listitem>
! </varlistentry>
!
! <varlistentry>
! <term><literal>device lpt0 at ppbus?</literal></term>
!
! <listitem>
! <para>Provides support for the parallel port printer.</para>
!
! <note>
! <para>All three of the above items must be included to
! enable parallel printer support.</para>
! </note>
</listitem>
</varlistentry>
</variablelist>
***************
*** 1427,1433 ****
<listitem>
<para>Generic sound driver code. Required for all of the
! following sound cards except <literal>pca</literal>.</para>
</listitem>
</varlistentry>
--- 1459,1466 ----
<listitem>
<para>Generic sound driver code. Required for all of the
! following sound cards except <literal>pca</literal> and
! <literal>pcm</literal>.</para>
</listitem>
</varlistentry>
***************
*** 1554,1560 ****
<note>
<para>There is some additional documentation in
! <filename>/usr/src/sys/i386/isa/sound/</filename>. Also, if
you add any of these devices, be sure to create the sound <link
linkend="kernelconfig-nodes">device nodes</link>.</para>
</note>
--- 1587,1594 ----
<note>
<para>There is some additional documentation in
! <filename>/usr/src/sys/i386/isa/sound/</filename> and
! <filename>/usr/src/sys/i386/isa/snd/</filename>. Also, if
you add any of these devices, be sure to create the sound <link
linkend="kernelconfig-nodes">device nodes</link>.</para>
</note>
***************
*** 1716,1734 ****
add is:</para>
<programlisting>
! controller wcd0</programlisting>
<para>This means that you should look for some entries that start with
! <filename>wcd0</filename> in the <filename>/dev</filename> directory,
possibly followed by a letter, such as <literal>c</literal>, or preceded
by the letter <literal>r</literal>, which means a “raw”
device. It turns out that those files are not there, so I must change
to the <filename>/dev</filename> directory and type:</para>
! <screen>&prompt.root; <userinput>sh MAKEDEV wcd0</userinput></screen>
<para>When this script finishes, you will find that there are now
! <filename>wcd0c</filename> and <filename>rwcd0c</filename> entries in
<filename>/dev</filename> so you know that it executed correctly.</para>
<para>For sound cards, the command:
--- 1750,1768 ----
add is:</para>
<programlisting>
! device acd0</programlisting>
<para>This means that you should look for some entries that start with
! <filename>acd0</filename> in the <filename>/dev</filename> directory,
possibly followed by a letter, such as <literal>c</literal>, or preceded
by the letter <literal>r</literal>, which means a “raw”
device. It turns out that those files are not there, so I must change
to the <filename>/dev</filename> directory and type:</para>
! <screen>&prompt.root; <userinput>sh MAKEDEV acd0</userinput></screen>
<para>When this script finishes, you will find that there are now
! <filename>acd0c</filename> and <filename>racd0c</filename> entries in
<filename>/dev</filename> so you know that it executed correctly.</para>
<para>For sound cards, the command:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-doc" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990925153256.33AE7F80F>