Date: Sun, 24 Nov 1996 17:59:03 +0100 (MET) From: frank <frank@news.via.nl> To: freebsd-current@freebsd.org Subject: Crash in 3.0 current when tape starts rewinding? Message-ID: <Pine.BSF.3.91.961124175505.2720A-100000@news.via.nl>
next in thread | raw e-mail | index | archive | help
Hello all, Never had this problem before; but this morning there was a crash as the server was done with an rdump from another machine. Later it looked as if it was going to happen again but with 'mt offl' i think i beat it to crashing. Here is some output: FreeBSD 3.0-CURRENT #0: Sat Nov 23 00:13:10 MET 1996 frank@news:/usr/src/sys/compile/VIA Calibrating clock(s) relative to mc146818A clock ... i586 clock: 121702335 Hz, i8254 clock: 1193161 Hz CPU: Pentium (121.70-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) avail memory = 62590976 (61124K bytes) Probing for devices on PCI bus 0: chip0 <generic PCI bridge (vendor=8086 device=7030 subclass=0)> rev 2 on pci0:0 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 vga0 <VGA-compatible display device> rev 0 int a irq 12 on pci0:10 de0 <Digital DC21040 Ethernet> rev 35 int a irq 10 on pci0:11 de0: DC21040 [10Mb/s] pass 2.3 de0: address 00:00:e8:0d:c7:20 de0: enabling BNC/AUI port ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12 ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 1034MB (2118144 512 byte sectors) (ahc0:1:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 1034MB (2118144 512 byte sectors) (ahc0:2:0): "MICROP 4221-09MZ 1128K HT02" type 0 fixed SCSI 2 sd2(ahc0:2:0): Direct-Access 1955MB (4004219 512 byte sectors) (ahc0:3:0): "ARCHIVE Python 25950-XXX 2.29" type 1 removable SCSI 2 st0(ahc0:3:0): Sequential-Access density code 0x13, 512-byte blocks, write-enabled (ahc0:5:0): "MICROP 2217-15MQ1001901 HQ30" type 0 fixed SCSI 2 sd3(ahc0:5:0): Direct-Access 1683MB (3447008 512 byte sectors) (ahc0:6:0): "IBM DPES-31080 S80E" type 0 fixed SCSI 2 sd4(ahc0:6:0): Direct-Access 1034MB (2118144 512 byte sectors) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio4 at 0x2a0-0x2a7 flags 0x701 on isa sio4: type 16550A (multiport) sio5 at 0x2a8-0x2af flags 0x701 on isa sio5: type 16550A (multiport) sio6 at 0x2b0-0x2b7 flags 0x701 on isa sio6: type 16550A (multiport) sio7 at 0x2b8-0x2bf irq 5 flags 0x701 on isa sio7: type 16550A (multiport master) lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B ie0 not found at 0x360 ep0 not found at 0x300 ix0 not found at 0x300 le0 not found at 0x300 lnc0 not found at 0x280 lnc1 not found at 0x300 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface changing root device to sd0a ccd0-3: Concatenated disk drivers WARNING: / was not properly dismounted. st0(ahc0:3:0): timed out in dataout phase, SCSISIGI == 0x4 SEQADDR == 0x13c st0(ahc0:3:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x6 ahc0: Issued Channel A Bus Reset. 3 SCBs aborted sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 sd0(ahc0:0:0): Power on, reset, or bus device reset occurred , retries:4 sd1(ahc0:1:0): UNIT ATTENTION asc:29,0 sd1(ahc0:1:0): Power on, reset, or bus device reset occurred , retries:4 st0(ahc0:3:0): Target Busy st0(ahc0:3:0): Target Busy st0(ahc0:3:0): Target Busy st0(ahc0:3:0): Target Busy st0(ahc0:3:0): Target Busy st0(ahc0:3:0): Target Busy sd4(ahc0:6:0): UNIT ATTENTION asc:29,0 sd4(ahc0:6:0): Power on, reset, or bus device reset occurred , retries:4 Is there anything i can do other than cvsup until it's fixed? Kind regards, Frank Ederveen p.s. I patched iostat.c a bit. It shows more drives, and still fits in 80 columns. ftp to news.via.nl and get it yourself p.p.s i want to run 3.0, 'cause it has some nice new features >:-)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.961124175505.2720A-100000>