Date: Sat, 8 Nov 2003 01:29:38 +0100 (CET) From: =?iso-8859-1?q?JulTomten?= <fettmespam@yahoo.se> To: freebsd-current@freebsd.org Subject: 5.1-RELEASE kernel panic Message-ID: <20031108002938.10881.qmail@web86108.mail.ukl.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hello! I'm having some trouble booting the 5.1-RELEASE installation floppies on an old AST Premmia GX P/133 SMP machine. The system is currently running 3.5-STABLE without any problems. Any ideas anyone?? dmesg output follows: FreeBSD/i386 boot Default: 0:fd(0,a)/boot/loader boot: Uncompressing ... done Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 640kB/97280kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@wv1u.btc.adaptec.com, Thu Jun 5 00:52:26 GMT 2003) /kernel text=0x237550 data=0x2f140+0x4b63c - Please insert MFS root floppy and press enter: Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel] in 9 seconds... Booting [/kernel] in 8 seconds... Booting [/kernel] in 7 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v stray irq 7 SMAP type=01 base=0000000000000000 len=00000000000a0000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=0000000005f00000 SMAP type=02 base=00000000fffe0000 len=0000000000020000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=c3fe72bf base=c3b736bbc3af2ebb len=c3ffdebbc3ffe0bb Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 03:08:07 GMT 2003 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS Preloaded elf kernel "/kernel" at 0xc07ec000. Preloaded mfs_root "/mfsroot" at 0xc07ec1dc. Calibrating clock(s) ... i8254 clock: 1193784 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 133262060 Hz Timecounter "TSC" frequency 133262060 Hz CPU: Pentium/P54C (133.26-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52b Stepping = 11 Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC> real memory = 100663296 (96 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000813000 - 0x0000000005e29fff, 90271744 bytes (22039 pages) avail memory = 89374720 (85 MB) bios32: Found BIOS32 Service Directory header at 0xc00fe100 bios32: Entry = 0xfa8f6 (c00fa8f6) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xa1a0 pnpbios: Found PnP BIOS data at 0xc00f1790 pnpbios: Entry = f0000:185e Rev = 1.0 pnpbios: OEM ID 1127406 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug null: <null device, zero device> mem: <memory & I/O> md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03b2cdc npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80002000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found pci_open(1b): mode1res=0x80000000 (0xff000001) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found pci_open(2): mode 2 enable port (0x0cf8) is 0x00 pci_open(2a): mode2res=0x0e (0x0e) pci_open(2a): now trying mechanism 2 pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086) pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x04a3, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2400, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0482, revid=0x03 bus=0, slot=2, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fe800000, size 14, enabled map[14]: type 3, range 32, base fe000000, size 23, enabled found-> vendor=0x102b, dev=0x0519, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 4, range 32, base 000001f0, size 4, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 00000900, size 4, enabled found-> vendor=0x1095, dev=0x0646, revid=0x01 bus=0, slot=6, func=0 class=01-01-8e, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 eisab0: <PCI-EISA bridge> at device 2.0 on pci0 eisa0: <EISA bus> on eisab0 mainboard0: <AST1201 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on eisab0 pci0: <display, VGA> at device 4.0 (no driver attached) atapci0: <CMD 646 WDMA2 controller> port 0x900-0x90f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1ff at device 6.0 on pci0 pci_cfgintr: can't route an interrupt to 0:6 INTA atapci0: unable to map interrupt atapci0: Busmastering DMA not supported ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 18 devices, largest 127 bytes PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding io range 0x7f0-0x7f5, size=0x6, align=0x1 PNP0700: adding io range 0x7f7-0x7f7, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0700 (0007d041) PNP0001: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0001: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0001: adding io range 0x460-0x467, size=0x8, align=0x1 PNP0001: adding irq mask 0x4 pnpbios: handle 1 device ID PNP0001 (0100d041) PNP0101: adding io range 0x40-0x48, size=0x9, align=0x1 PNP0101: adding irq mask 0x1 pnpbios: handle 3 device ID PNP0101 (0101d041) PNP0201: adding io range 0-0xf, size=0x10, align=0x1 PNP0201: adding io range 0x80-0x8f, size=0x10, align=0x1 PNP0201: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0201: adding io range 0x400-0x40f, size=0x10, align=0x1 PNP0201: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0201: adding io range 0x4c0-0x4df, size=0x20, align=0x1 PNP0201: adding dma mask 0x10 pnpbios: handle 4 device ID PNP0201 (0102d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 7 device ID PNP0f13 (130fd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding io range 0x7f8-0x7ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 8 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x1 PNP0501: adding io range 0x6f8-0x6ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x8 pnpbios: handle 9 device ID PNP0501 (0105d041) PNP0400: adding io range 0x378-0x37b, size=0x4, align=0x1 PNP0400: adding irq mask 0x80 pnpbios: handle 10 device ID PNP0400 (0004d041) pnpbios: handle 11 device ID PNP0600 (0006d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 12 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1 PNP0a03: adding io range 0xc00-0xc00, size=0x1, align=0x1 pnpbios: handle 13 device ID PNP0a03 (030ad041) PNP0c01: adding memory32 range 0-0x9ffff, size=0xa0000, align=0x1 PNP0c01: adding memory32 range 0x100000-0x5ffffff, size=0x5f00000, align=0x1 PNP0c01: adding memory32 range 0xf0000-0xfffff, size=0x10000, align=0x1 pnpbios: handle 14 device ID PNP0c01 (010cd041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 15 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x22-0x23, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x93, size=0x2, align=0x1 PNP0c02: adding io range 0x880-0x8ff, size=0x80, align=0x1 pnpbios: handle 16 device ID PNP0c02 (020cd041) pnpbios: error 1 making BIOS16 call sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc_detect_fifo: PWord not supported ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0001> failed to probe at port 0x460-0x467,0xa0-0xa1,0x20-0x21 irq 2 on isa0 adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0101> failed to probe at port 0x40-0x48 irq 0 on isa0 adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0201> failed to probe at port 0x4c0-0x4df,0x480-0x48f,0x400-0x40f,0xc0-0xdf,0x80-0x8f,0-0xf drq 4 on isa0 adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37b on isa0 unknown: <Generic ESDI/IDE/ATA controller> failed to probe on isa0 adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0800> failed to probe at port 0x61 on isa0 adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x22 specified. Nearest valid baseport is 0x100. Failing probe. Device configuration finished. Timecounters tick every 10.000 msec lo0: bpf attached [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 Fatal trap 12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0x0 stack pointer = 0x10:0xc080ed2c frame pointer = 0x10:0xc080ed50 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) trap number = 12 panic: page fault syncing disks, buffers remaining... done Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... Höstrusk och grå moln - köp en resa till solen på Yahoo! Resor på adressen http://se.docs.yahoo.com/travel/index.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031108002938.10881.qmail>