Date: Fri, 22 Jun 2018 01:59:20 +0000 (UTC) From: Ian Lepore <ian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r335527 - in head/usr.sbin: . spi Message-ID: <201806220159.w5M1xKBk001701@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: ian Date: Fri Jun 22 01:59:19 2018 New Revision: 335527 URL: https://svnweb.freebsd.org/changeset/base/335527 Log: Add spi(8), a utility for communicating with a device on a SPI bus from userland, conceptually similar to what i2c(8) provides for i2c devices. Submitted by: Bob Frazier Differential Revision: https://reviews.freebsd.org/D15029 Added: head/usr.sbin/spi/ head/usr.sbin/spi/Makefile (contents, props changed) head/usr.sbin/spi/spi.8 (contents, props changed) head/usr.sbin/spi/spi.c (contents, props changed) Modified: head/usr.sbin/Makefile Modified: head/usr.sbin/Makefile ============================================================================== --- head/usr.sbin/Makefile Fri Jun 22 01:10:05 2018 (r335526) +++ head/usr.sbin/Makefile Fri Jun 22 01:59:19 2018 (r335527) @@ -84,6 +84,7 @@ SUBDIR= adduser \ setpmac \ smbmsg \ snapinfo \ + spi \ spray \ syslogd \ sysrc \ Added: head/usr.sbin/spi/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/usr.sbin/spi/Makefile Fri Jun 22 01:59:19 2018 (r335527) @@ -0,0 +1,9 @@ +# $FreeBSD$ + +#.include <src.opts.mk> + +PROG= spi + +MAN8= spi.8 + +.include <bsd.prog.mk> Added: head/usr.sbin/spi/spi.8 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/usr.sbin/spi/spi.8 Fri Jun 22 01:59:19 2018 (r335527) @@ -0,0 +1,197 @@ +.\" Copyright (c) 2018 by S.F.T. Inc. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd "15 April 2018" +.Dt spi 8 +.Os +.Sh NAME +.Nm spi +.Nd communicate on SPI bus with slave devices +.Sh SYNOPSIS +.Nm +.Op Fl f Ar device +.Op Fl d Ar r|w|rw +.Op Fl m Ar mode +.Op Fl s Ar max-speed +.Op Fl c Ar count +.Op Fl C Ar cmd_bytes +.Op Fl A +.Op Fl b +.Op Fl L +.Op Fl v +.Nm +.Op Fl i +.Op Fl f Ar device +.Op Fl v +.Nm +.Op Fl h +.Sh DESCRIPTION +The +.Nm +utility can be used to perform raw data transfers +.Pq read, write, or simultaneous read/write +with devices on the SPI bus, via the +.Xr spigen 4 +device. +.Pp +Each +.Xr spigen 4 +device is associated with a specific +.Sq chip select +.Pq cs +pin on the spibus, and therefore needs to be specified. +If no device name is specified on the command line, +.Nm +assumes +.Sq spigen0.0 . +.Pp +For more information on the spigen device, see +.Xr spigen 4 . +.Pp +The options are as follows: +.Bl -tag -width ".Fl f Ar device" +.It Fl A +Specifies ASCII mode. +Both read and write data is input and output as +2-character hexadecimal values, optionally separated by white space, +such as 00 01 02 etc. +When combined with the +.Sq -b +flag, the data on stdin remains a sequence of ASCII hexadecimal +byte values, but the output reverts to binary mode. +.It Fl b +Binary +.Pq output +mode. +Only has an effect when +.Sq -A +has been specified. +Reverts the output back to binary +.Pq rather than ASCII , +while leaving the input format as-is. +Use in combination with +.Sq -A +to allow using something like +.Sq echo +to pass hexadecimal values to the SPI device, but output the received data +on stdout as binary. +.It Fl C Ar command bytes +Sends one or more +.Sq command +bytes, skipping any bytes read-in during the transfer. +The byte values should be specified as a quoted parameter, similar to the +format for data on stdin for +.Sq -A , +that is, 2 character hexadecimal values, optionally separated by white space. +An SPI device will typically require that a command be sent, followed by +bytes of data. +You can use this option to send the command without receiving any data bytes +during the command sequence. +.It Fl c Ar count +The total number of bytes to transfer as a decimal integer. +If a write or a read/write transaction is being performed, and fewer than +this number of bytes are read in from stdin, the remaining bytes will be +sent with a value of +.Sq 0 . +If the length can be determined from the input file size, you can use a +.Sq count +value of +.Sq -1 +to base the transfer on the input file's size. +.It Fl d Ar r|w|rw +Transfer direction: Use +.Sq r +for read, +.Sq w for write, and +.Sq rw +for simultaneous read and write. +.It Fl f Ar device +SPI device to use +.Pq default is /dev/spigen0 . +.It Fl h +Print help text to stderr, explaining the command line options. +.It Fl i +Displays information about the SPI device to stderr. +Whenever this flag is specified, no data is read or written, and the mode +and clock speed are not changed. +.It Fl L +LSB bit order. +The default is MSB, i.e., the highest order bit is +transmitted first. +Specifying -L caused the LSB to be transmitted and read first. +.It Fl m Ar 0 - 3 +SPI mode, 0 through 3. +This defines the clock phase and timing with respect to reading and writing +data, as per the SPI specification. +.It Fl s Ar speed +Specify the maximum speed, in Hz, for the SPI clock. +The bus will operate at its highest available speed which does not +exceed this maximum. +.It Fl v +Specifies Verbose mode. +Diagnostics and information are written to stderr. +You can specify +.Sq -v +more than once to increase verbosity. +.El +.Sh EXAMPLES +Here are a few examples of using the spi utility: +.Bl -bullet +.It +Get information about the default SPI device +.Pp +spi -i +.It +Set the maximum clock speed to 200Khz and the mode to 3 on spigen0.1, but do +not transmit nor receive any data +.Pp +spi -f spigen0.1 -s 200000 -m 3 +.It +Send a command sequence consisting of 2 bytes, and read 2 additional bytes +from the SPI device, using the current mode and speed on the default device +.Pp +spi -d r -C "00 01" -c 2 +.It +Transmit a byte value of 5, and receive 2 bytes, displaying their values as +2-byte ASCII hexadecimal, with mode 2, and a maximum clock speed of 500khz. +.Pp +echo "05" | spi -A -d rw -m 2 -s 500000 -c 2 +.It +Send a binary file, and output the SPI result through +.Sq od +as hexadecimal bytes, using the current maximum clock speed and SPI mode. +.Pp +spi -d rw -c -1 <input_file.bin | od -An -t x1 +.It +Send 2 bytes of data, receive a total of 4 bytes, and output the SPI result +as binary data, piped through +.Sq od , +displaying it as two hexadecimal unsigned short integer values. +.Pp +echo "00 01" | spi -A -b -d rw -c 4 | od -t x2 +.El +.Pp +.Sh SEE ALSO +.Xr spigen 4 Added: head/usr.sbin/spi/spi.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/usr.sbin/spi/spi.c Fri Jun 22 01:59:19 2018 (r335527) @@ -0,0 +1,958 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2018 S.F.T. Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <sys/types.h> +#include <sys/ioccom.h> +#include <sys/spigenio.h> +#include <sys/sysctl.h> + +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <limits.h> +#include <memory.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <string.h> +#include <unistd.h> + +#define DEFAULT_DEVICE_NAME "/dev/spigen0.0" + +#define DEFAULT_BUFFER_SIZE 8192 + +#define DIR_READ 0 +#define DIR_WRITE 1 +#define DIR_READWRITE 2 +#define DIR_NONE -1 + +struct spi_options { + int mode; /* mode (0,1,2,3, -1 == use default) */ + int speed; /* speed (in Hz, -1 == use default) */ + int count; /* count (0 through 'n' bytes, negative for + * stdin length) */ + int binary; /* non-zero for binary output or zero for + * ASCII output when ASCII != 0 */ + int ASCII; /* zero for binary input and output. + * non-zero for ASCII input, 'binary' + * determines output */ + int lsb; /* non-zero for LSB order (default order is + * MSB) */ + int verbose; /* non-zero for verbosity */ + int ncmd; /* bytes to skip for incoming data */ + uint8_t *pcmd; /* command data (NULL if none) */ +}; + +static void usage(void); +static int interpret_command_bytes(const char *parg, struct spi_options *popt); +static void * prep_write_buffer(struct spi_options *popt); +static int _read_write(int hdev, void *bufw, void *bufr, int cbrw, int lsb); +static int _do_data_output(void *pr, struct spi_options *popt); +static int get_info(int hdev, const char *dev_name); +static int set_mode(int hdev, struct spi_options *popt); +static int set_speed(int hdev, struct spi_options *popt); +static int hexval(char c); +static int perform_read(int hdev, struct spi_options *popt); +static int perform_write(int hdev, struct spi_options *popt); +static int perform_readwrite(int hdev, struct spi_options *popt); +static void verbose_dump_buffer(void *pbuf, int icount, int lsb); + +/* + * LSB array - reversebits[n] is the LSB value of n as an MSB. Use this array + * to obtain a reversed bit pattern of the index value when bits must + * be sent/received in an LSB order vs the default MSB + */ +static uint8_t reversebits[256] = { + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, + 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, + 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, + 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, + 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, + 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, + 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, + 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, + 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, + 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, + 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, + 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, + 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, + 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, + 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, + 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, + 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, + 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, + 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, + 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, + 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, + 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, + 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, + 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, + 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, + 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, + 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, + 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, + 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, + 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff +}; + + +static void +usage(void) +{ + fputs(getprogname(), stderr); + fputs(" - communicate on SPI bus with slave devices\n" + "Usage:\n" + " spi [-f device] [-d r|w|rw] [-m mode] [-s max-speed] [-c count]\n" + " [-C \"command bytes\"] [-A] [-b] [-L] [-v]\n" + " spi -i [-f device] [-v]\n" + " spi -h\n" + " where\n" + " -f specifies the device (default is spigen0.0)\n" + " -d specifies the operation (r, w, or rw; default is rw)\n" + " -m specifies the mode (0, 1, 2, or 3)\n" + " -s specifies the maximum speed (default is 0, device default)\n" + " -c specifies the number of data bytes to transfer (default 0, i.e. none)\n" + " A negative value uses the length of the input data\n" + " -C specifies 'command bytes' to be sent, as 2 byte hexadecimal values\n" + " (these should be quoted, separated by optional white space)\n" + " -L specifies 'LSB' order on the SPI bus (default is MSB)\n" + " -i query information about the device\n" + " -A uses ASCII for input/output as 2-digit hex values\n" + " -b Override output format as binary (only valid with '-A')\n" + " -v verbose output\n" + " -h prints this message\n" + "\n" + "NOTE: setting the mode and/or speed is 'sticky'. Subsequent transactions\n" + " on that device will, by default, use the previously set values.\n" + "\n", + stderr); +} + +int +main(int argc, char *argv[], char *envp[] __unused) +{ + struct spi_options opt; + int err, ch, hdev, finfo, fdir; + char *pstr; + char dev_name[PATH_MAX * 2 + 5]; + + finfo = 0; + fdir = DIR_NONE; + + hdev = -1; + err = 0; + + dev_name[0] = 0; + + opt.mode = -1; + opt.speed = -1; + opt.count = 0; + opt.ASCII = 0; + opt.binary = 0; + opt.lsb = 0; + opt.verbose = 0; + opt.ncmd = 0; + opt.pcmd = NULL; + + while (!err && (ch = getopt(argc, argv, "f:d:m:s:c:C:AbLvih")) != -1) { + switch (ch) { + case 'd': + if (optarg[0] == 'r') { + if (optarg[1] == 'w' && optarg[2] == 0) { + fdir = DIR_READWRITE; + } + else if (optarg[1] == 0) { + fdir = DIR_READ; + } + } + else if (optarg[0] == 'w' && optarg[1] == 0) { + fdir = DIR_WRITE; + } + else { + err = 1; + } + break; + + case 'f': + if (!optarg[0]) { /* unlikely */ + fputs("error - missing device name\n", stderr); + err = 1; + } + else { + if (optarg[0] == '/') + strlcpy(dev_name, optarg, + sizeof(dev_name)); + else + snprintf(dev_name, sizeof(dev_name), + "/dev/%s", optarg); + } + break; + + case 'm': + opt.mode = (int)strtol(optarg, &pstr, 10); + + if (!pstr || *pstr || opt.mode < 0 || opt.mode > 3) { + fprintf(stderr, "Invalid mode specified: %s\n", + optarg); + err = 1; + } + break; + + case 's': + opt.speed = (int)strtol(optarg, &pstr, 10); + + if (!pstr || *pstr || opt.speed < 0) { + fprintf(stderr, "Invalid speed specified: %s\n", + optarg); + err = 1; + } + break; + + case 'c': + opt.count = (int)strtol(optarg, &pstr, 10); + + if (!pstr || *pstr) { + fprintf(stderr, "Invalid count specified: %s\n", + optarg); + err = 1; + } + break; + + case 'C': + if(opt.pcmd) /* specified more than once */ + err = 1; + else { + /* get malloc'd buffer or error */ + if (interpret_command_bytes(optarg, &opt)) + err = 1; + } + + break; + + case 'A': + opt.ASCII = 1; + break; + + case 'b': + opt.binary = 1; + break; + + case 'L': + opt.lsb = 1; + break; + + case 'v': + opt.verbose++; + break; + + case 'i': + finfo = 1; + break; + + default: + err = 1; + /* FALLTHROUGH */ + case 'h': + usage(); + goto the_end; + } + } + + argc -= optind; + argv += optind; + + if (err || + (fdir == DIR_NONE && !finfo && opt.mode == -1 && opt.speed == -1 && opt.count == 0)) { + /* + * if any of the direction, mode, speed, or count not specified, + * print usage + */ + + usage(); + goto the_end; + } + + if ((opt.count != 0 || opt.ncmd != 0) && fdir == DIR_NONE) { + /* + * count was specified, but direction was not. default is + * read/write + */ + /* + * this includes a negative count, which implies write from + * stdin + */ + if (opt.count == 0) + fdir = DIR_WRITE; + else + fdir = DIR_READWRITE; + } + + if (opt.count < 0 && fdir != DIR_READWRITE && fdir != DIR_WRITE) { + fprintf(stderr, "Invalid length %d when not writing data\n", + opt.count); + + err = 1; + usage(); + goto the_end; + } + + + if (!dev_name[0]) /* no device name specified */ + strlcpy(dev_name, DEFAULT_DEVICE_NAME, sizeof(dev_name)); + + hdev = open(dev_name, O_RDWR); + + if (hdev == -1) { + fprintf(stderr, "Error - unable to open '%s', errno=%d\n", + dev_name, errno); + err = 1; + goto the_end; + } + + if (finfo) { + err = get_info(hdev, dev_name); + goto the_end; + } + + /* check and assign mode, speed */ + + if (opt.mode != -1) { + err = set_mode(hdev, &opt); + + if (err) + goto the_end; + } + + if (opt.speed != -1) { + err = set_speed(hdev, &opt); + + if (err) + goto the_end; + } + + /* do data transfer */ + + if (fdir == DIR_READ) { + err = perform_read(hdev, &opt); + } + else if (fdir == DIR_WRITE) { + err = perform_write(hdev, &opt); + } + else if (fdir == DIR_READWRITE) { + err = perform_readwrite(hdev, &opt); + } + +the_end: + + if (hdev != -1) + close(hdev); + + free(opt.pcmd); + + return (err); +} + +static int +interpret_command_bytes(const char *parg, struct spi_options *popt) +{ + int ch, ch2, ctr, cbcmd, err; + const char *ppos; + void *ptemp; + uint8_t *pcur; + + err = 0; + cbcmd = DEFAULT_BUFFER_SIZE; /* initial cmd buffer size */ + popt->pcmd = (uint8_t *)malloc(cbcmd); + + if (!popt->pcmd) + return 1; + + pcur = popt->pcmd; + + ctr = 0; + ppos = parg; + + while (*ppos) { + while (*ppos && *ppos <= ' ') { + ppos++; /* skip (optional) leading white space */ + } + + if (!*ppos) + break; /* I am done */ + + ch = hexval(*(ppos++)); + if (ch < 0 || !*ppos) { /* must be valid pair of hex characters */ + err = 1; + goto the_end; + } + + ch2 = hexval(*(ppos++)); + if (ch2 < 0) { + err = 1; + goto the_end; + } + + ch = (ch * 16 + ch2) & 0xff; /* convert to byte */ + + if (ctr >= cbcmd) { /* need re-alloc buffer? (unlikely) */ + cbcmd += 8192; /* increase by additional 8k */ + ptemp = realloc(popt->pcmd, cbcmd); + + if (!ptemp) { + err = 1; + fprintf(stderr, + "Not enough memory to interpret command bytes, errno=%d\n", + errno); + goto the_end; + } + + popt->pcmd = (uint8_t *)ptemp; + pcur = popt->pcmd + ctr; + } + + if (popt->lsb) + *pcur = reversebits[ch]; + else + *pcur = (uint8_t)ch; + + pcur++; + ctr++; + } + + popt->ncmd = ctr; /* record num bytes in '-C' argument */ + +the_end: + + /* at this point popt->pcmd is NULL or a valid pointer */ + + return err; +} + +static int +get_info(int hdev, const char *dev_name) +{ + uint32_t fmode, fspeed; + int err; + char temp_buf[PATH_MAX], cpath[PATH_MAX]; + + if (!realpath(dev_name, cpath)) /* get canonical name for info purposes */ + strlcpy(cpath, temp_buf, sizeof(cpath)); /* this shouldn't happen */ + + err = ioctl(hdev, SPIGENIOC_GET_SPI_MODE, &fmode); + + if (err == 0) + err = ioctl(hdev, SPIGENIOC_GET_CLOCK_SPEED, &fspeed); + + if (err == 0) { + fprintf(stderr, + "Device name: %s\n" + "Device mode: %d\n" + "Device speed: %d\n", + cpath, fmode, fspeed);//, max_cmd, max_data, temp_buf); + } + else + fprintf(stderr, "Unable to query info (err=%d), errno=%d\n", + err, errno); + + return err; +} + +static int +set_mode(int hdev, struct spi_options *popt) +{ + uint32_t fmode = popt->mode; + + if (popt->mode < 0) /* use default? */ + return 0; + + return ioctl(hdev, SPIGENIOC_SET_SPI_MODE, &fmode); +} + +static int +set_speed(int hdev, struct spi_options *popt) +{ + uint32_t clock_speed = popt->speed; + + if (popt->speed < 0) + return 0; + + return ioctl(hdev, SPIGENIOC_SET_CLOCK_SPEED, &clock_speed); +} + +static int +hexval(char c) +{ + if (c >= '0' && c <= '9') { + return c - '0'; + } else if (c >= 'A' && c <= 'F') { + return c - 'A' + 10; + } else if (c >= 'a' && c <= 'f') { + return c - 'a' + 10; + } + return -1; +} + +static void * +prep_write_buffer(struct spi_options *popt) +{ + int ch, ch2, ch3, ncmd, lsb, err; + uint8_t *pdata, *pdat2; + size_t cbdata, cbread; + const char *szbytes; + + ncmd = popt->ncmd; /* num command bytes (can be zero) */ + + if (ncmd == 0 && popt->count == 0) + return NULL; /* always since it's an error if it happens + * now */ + + if (popt->count < 0) { + cbdata = DEFAULT_BUFFER_SIZE; + } + else { + cbdata = popt->count; + } + + lsb = popt->lsb; /* non-zero if LSB order; else MSB */ + + pdata = malloc(cbdata + ncmd + 1); + cbread = 0; + + err = 0; + + if (!pdata) + return NULL; + + if (popt->pcmd && ncmd > 0) { + memcpy(pdata, popt->pcmd, ncmd); /* copy command bytes */ + pdat2 = pdata + ncmd; + } + else + pdat2 = pdata; /* no prepended command data */ + + /* + * read up to 'cbdata' bytes. If I get an EOF, do one of two things: + * a) change the data count to match how many bytes I read in b) fill + * the rest of the input buffer with zeros + * + * If the specified length is negative, I do 'a', else 'b' + */ + + while (!err && cbread < cbdata && (ch = fgetc(stdin)) != EOF) { + if (popt->ASCII) { + /* skip consecutive white space */ + + while (ch <= ' ') { + if ((ch = fgetc(stdin)) == EOF) + break; + } + + if (ch != EOF) { + ch2 = hexval(ch); + + if (ch2 < 0) { +invalid_character: + fprintf(stderr, + "Invalid input character '%c'\n", ch); + err = 1; + break; + } + + ch = fgetc(stdin); + + if (ch != EOF) { + ch3 = hexval(ch); + + if (ch3 < 0) + goto invalid_character; + + ch = ch2 * 16 + ch3; + } + } + + if (err || ch == EOF) + break; + } + + /* for LSB, flip the bits - otherwise, just copy the value */ + if (lsb) + pdat2[cbread] = reversebits[ch]; + else + pdat2[cbread] = (uint8_t) ch; + + cbread++; /* increment num bytes read so far */ + } + + /* if it was an error, not an EOF, that ended the I/O, return NULL */ + + if (err || ferror(stdin)) { + free(pdata); + return NULL; + } + + if (popt->verbose > 0) { + const char *sz_bytes; + + if (cbread != 1) + sz_bytes = "bytes"; /* correct plurality of 'byte|bytes' */ + else + sz_bytes = "byte"; + + if (popt->ASCII) + fprintf(stderr, "ASCII input of %zd %s\n", cbread, + sz_bytes); + else + fprintf(stderr, "Binary input of %zd %s\n", cbread, + sz_bytes); + } + + /* + * if opt.count is negative, copy actual byte count to opt.count which does + * not include any of the 'command' bytes that are being sent. Can be zero. + */ + if (popt->count < 0) { + popt->count = cbread; + } + /* + * for everything else, fill the rest of the read buffer with '0' + * bytes, as per the standard practice for SPI + */ + else { + while (cbread < cbdata) + pdat2[cbread++] = 0; + } + + /* + * popt->count bytes will be sent and read from the SPI, preceded by the + * 'popt->ncmd' command bytes (if any). + * So we must use 'popt->count' and 'popt->ncmd' from this point on in + * the code. + */ + + if (popt->verbose > 0 && popt->count + popt->ncmd) { + if ((popt->count + popt->ncmd) == 1) + szbytes = "byte"; + else + szbytes = "bytes"; + + fprintf(stderr, "Writing %d %s to SPI device\n", + popt->count + popt->ncmd, szbytes); + + verbose_dump_buffer(pdata, popt->count + popt->ncmd, lsb); + } + + return pdata; +} + +static int +_read_write(int hdev, void *bufw, void *bufr, int cbrw, int lsb) +{ + int err, ctr; + struct spigen_transfer spi; + + if (!cbrw) + return 0; + + if (!bufr) + bufr = bufw; + else + memcpy(bufr, bufw, cbrw); /* transaction uses bufr for + * both R and W */ + + bzero(&spi, sizeof(spi)); /* zero structure first */ + + /* spigen code seems to suggest there must be at least 1 command byte */ + + spi.st_command.iov_base = bufr; + spi.st_command.iov_len = cbrw; + + /* + * The remaining members for spi.st_data are zero - all bytes are + * 'command' for this. The driver doesn't really do anything different + * for 'command' vs 'data' and at least one command byte must be sent in + * the transaction. + */ + + err = ioctl(hdev, SPIGENIOC_TRANSFER, &spi) < 0 ? -1 : 0; + + if (!err && lsb) { + /* flip the bits for 'lsb' mode */ + for (ctr = 0; ctr < cbrw; ctr++) { + ((uint8_t *) bufr)[ctr] = + reversebits[((uint8_t *)bufr)[ctr]]; + } + } + + if (err) + fprintf(stderr, "Error performing SPI transaction, errno=%d\n", + errno); + + return err; +} + +static int +_do_data_output(void *pr, struct spi_options *popt) +{ + int err, index, icount; + const char *sz_bytes, *sz_byte2; + const uint8_t *pbuf; + + pbuf = (uint8_t *)pr + popt->ncmd; /* only the data we want */ + icount = popt->count; + err = 0; + + if (icount <= 0) { + return -1; /* should not but could happen */ + } + + if (icount != 1) + sz_bytes = "bytes"; /* correct plurality of 'byte|bytes' */ + else + sz_bytes = "byte"; + + if (popt->ncmd != 1) + sz_byte2 = "bytes"; + else + sz_byte2 = "byte"; + + /* binary on stdout */ + if (popt->binary || !popt->ASCII) { + if (popt->verbose > 0) + fprintf(stderr, "Binary output of %d %s\n", icount, + sz_bytes); + + err = (int)fwrite(pbuf, 1, icount, stdout) != icount; + } + else if (icount > 0) { + if (popt->verbose > 0) + fprintf(stderr, "ASCII output of %d %s\n", icount, + sz_bytes); + + /* ASCII output */ + for (index = 0; !err && index < icount; index++) { + if (index) { + /* + * not the first time, insert separating space + */ + err = fputc(' ', stdout) == EOF; + } + + if (!err) + err = fprintf(stdout, "%02hhx", pbuf[index]) < 0; + } + + if (!err) + err = fputc('\n', stdout) == EOF; + } *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201806220159.w5M1xKBk001701>