Date: Sun, 30 May 1999 14:51:51 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: hackers@FreeBSD.ORG Subject: FreeBSD 3.2, arp command doesn't show any entry Message-ID: <19990530145150.A28121@titan.klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
Hi ! Is that normal, that arp -a doesn't show any entry in the arp table ? I have these network interfaces: xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 172.16.2.1 netmask 0xffffff00 broadcast 172.16.2.255 ether 00:60:97:aa:3a:db media: 10baseT/UTP (10baseT/UTP <half-duplex>) supported media: 10base2/BNC 10base5/AUI 10baseT/UTP <full-duplex> 10baseT/UTP <half-duplex> 10baseT/UTP ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 172.16.1.1 netmask 0xffffff00 broadcast 172.16.1.255 ether 00:00:c0:5a:98:2a isp0: flags=a051<UP,POINTOPOINT,RUNNING,LINK1,MULTICAST> mtu 1500 inet 194.231.123.169 --> 194.231.123.161 netmask 0xffffffe0 arp -a doesn't show anything, although I ping to www.freebsd.org and other hosts, but nothing will be displayed. Even the usage arp hostname isn't displaying anything.... arp myhostname titan (172.16.1.1) -- no entry ping myhostname arp myhostname titan (172.16.1.1) -- no entry What's that ? Andreas /// My kernel config: # # TITAN # machine "i386" cpu "I686_CPU" ident TITAN maxusers 100 #options INCLUDE_CONFIG_FILE # Include this file in kernel #options USERCONFIG #boot -c editor #options VISUAL_USERCONFIG #visual boot -c editor options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O options "I4B_SMP_WORKAROUND" # Options for the VM subsystem #options PQ_NOOPT # No coloring options PQ_LARGECACHE # color for 512k/16k cache #options PQ_HUGECACHE # color for 1024k/16k cache options NMBCLUSTERS=4096 # Debugging #options DDB #options KTRACE #kernel tracing # Network #options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options IPFIREWALL_FORWARD #enable xparent proxy support options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity options IPDIVERT #divert sockets #options "ICMP_BANDLIM" #options DUMMYNET options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Softupdates options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options KERNFS #Kernel filesystem options NFS #Network File System options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" options NSWAPDEV=4 #options PCI_QUIET options COMPAT_LINUX options SHOW_BUSYBUFS options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" # Size of the kernel message buffer. Should be N * pagesize. options "MSGBUF_SIZE=40960" config kernel root on da0s2a controller isa0 controller pci0 #controller pnp0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 controller ahc0 controller scbus0 at ahc0 disk da0 at scbus0 target 0 unit 0 disk da4 at scbus0 target 1 unit 0 tape sa0 at scbus0 target 4 device cd0 at scbus0 target 5 device cd1 at scbus0 target 6 device pass0 # CAM passthrough driver # AHA 2940 controller ahc1 controller scbus1 at ahc1 disk da1 at scbus1 target 1 unit 0 disk da2 at scbus1 target 2 unit 0 disk da3 at scbus1 target 3 unit 0 options SCSI_DELAY=7000 #Be pessimistic about Joe SCSI device options AHC_ALLOW_MEMIO options SCSI_REPORT_GEOMETRY # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 13 device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 # device lpt0 at isa? port? tty irq 7 # Parallel port and friends. This replaces lpt0 (see lint or man pages) device ppc0 at isa? port? flags 0x40 tty irq 7 controller ppbus0 device lpt0 at ppbus? device xl0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 pseudo-device loop pseudo-device ether pseudo-device pty 256 pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device sppp #Generic Synchronous PPP pseudo-device tun 1 #pseudo-device ppp 1 pseudo-device ccd 4 #Concatenated disk driver options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpfilter) # ISDN4BSD section # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver) # note that the ``options'' and ``device'' lines must BOTH be defined ! # # Non-PnP Cards: # -------------- # # Teles S0/8 or Niccy 1008 #options "TEL_S0_8" #device isic0 at isa? iomem 0xd0000 net irq 5 flags 1 # # Teles S0/16 or Creatix ISDN-S0 or Niccy 1016 #options "TEL_S0_16" #device isic0 at isa? port 0xd80 iomem 0xd0000 net irq 5 flags 2 # # Teles S0/16.3 options "TEL_S0_16_3" device isic0 at isa? port 0xd80 net irq 9 flags 3 # # AVM A1 or AVM Fritz!Card #options "AVM_A1" #device isic0 at isa? port 0x340 net irq 5 flags 4 # # USRobotics Sportster ISDN TA intern #options "USR_STI" #device isic0 at isa? port 0x268 net irq 5 flags 7 # # ITK ix1 Micro #options "ITKIX1" #device isic0 at isa? port 0x398 net irq 10 flags 18 # # PnP-Cards: # ---------- # # Teles S0/16.3 PnP #options "TEL_S0_16_3_P" #device isic0 at isa? port ? net irq ? # # Creatix ISDN-S0 P&P #options "CRTX_S0_P" #device isic0 at isa? port ? net irq ? # # Dr. Neuhaus Niccy Go@ #options "DRN_NGO" #device isic0 at isa? port ? net irq ? # # Sedlbauer Win Speed #options "SEDLBAUER" #device isic0 at isa? port ? net irq ? # # Dynalink IS64PH #options "DYNALINK" #device isic0 at isa? port ? net irq ? # # ELSA QuickStep 1000pro ISA #options "ELSA_QS1ISA" #device isic0 at isa? port ? net irq ? # # PCI-Cards: # ---------- # # ELSA QuickStep 1000pro PCI #options "ELSA_QS1PCI" #device isic0 # # PCMCIA-Cards: # ------------- # # AVM PCMCIA Fritz!Card #options "AVM_A1_PCMCIA" #device isic0 at isa? port 0x340 net irq 5 flags 10 # # Active Cards: # ------------- # # Stollmann Tina-dd control device #device tina0 at isa? port 0x260 net irq 10 # # ISDN Protocol Stack # ------------------- # # Q.921 / layer 2 - i4b passive cards D channel handling pseudo-device "i4bq921" # # Q.931 / layer 3 - i4b passive cards D channel handling pseudo-device "i4bq931" # # layer 4 - i4b common passive and active card handling pseudo-device "i4b" # # ISDN devices # ------------ # # userland driver to do ISDN tracing (for passive cards only) pseudo-device "i4btrc" 4 # # userland driver to control the whole thing pseudo-device "i4bctl" # # userland driver for access to raw B channel pseudo-device "i4brbch" 4 # # userland driver for telephony pseudo-device "i4btel" 2 # # network driver for IP over raw HDLC ISDN pseudo-device "i4bipr" 4 # enable VJ header compression detection for ipr i/f options IPR_VJ # # network driver for sync PPP over ISDN pseudo-device "i4bisppp" 4 -- Andreas Klemm http://www.FreeBSD.ORG/~andreas http://www.freebsd.org/~fsmp/SMP/SMP.html powered by Symmetric MultiProcessor FreeBSD To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990530145150.A28121>