Date: Wed, 20 Jun 2001 01:24:36 +0900 From: Munehiro Matsuda <haro@h4.dion.ne.jp> To: imp@harmony.village.org Cc: haro@h4.dion.ne.jp, freebsd-current@FreeBSD.ORG Subject: Re: panic with pccard Message-ID: <20010620012436A.haro@h4.dion.ne.jp> In-Reply-To: <200106190531.f5J5VbV59960@harmony.village.org> References: <20010619002331G.haro@h4.dion.ne.jp> <200106190531.f5J5VbV59960@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Warner-san, From: Warner Losh <imp@harmony.village.org> Date: Mon, 18 Jun 2001 23:31:37 -0600 ::Thank you for the dmesg. I have a theory about what is going on, but ::need your help to test a patch since I cannot reproduce the problem ::here. Unfortunately, patch did not seem to work. I got the same panic as previously reported and trace seems the same too. Here's the dmesg: ACPI debug layer 0x0 debug level 0x0 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #3: Wed Jun 20 01:01:42 JST 2001 haro@jkpc11.ttr.kubota.co.jp:/usr/src/sys/compile/JKPC11 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 595574367 Hz CPU: Pentium III/Pentium III Xeon/Celeron (595.57-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (131008K bytes) avail memory = 125108224 (122176K bytes) Preloaded elf kernel "kernel" at 0xc0554000. Pentium Pro MTRR support enabled Using $PIR table, 7 entries at 0xc00fdf50 acpi0: <SONY Z3 > on motherboard acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Control Method Power Button Device> on acpi0 acpi_pcib0: <Host-PCI bridge> on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f at device 7.2 on pci0 pci_cfgintr_unique: hard-routed to irq 9 pci_cfgintr: 0:7 INTD routed to irq 9 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Philips Semiconductors hub, class 9/0, rev 1.10/1.10, addr 2 uhub1: 3 ports with 3 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.31, addr 3 pci0: <bridge, PCI-unknown> at 7.3 (no driver attached) pci0: <serial bus, FireWire> at 8.0 (no driver attached) pcm0: <Yamaha DS-1E (YMF744)> mem 0xfecf0000-0xfecf7fff irq 9 at device 9.0 on pci0 pci0: <simple comms> at 10.0 (no driver attached) fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 11.0 on pci0 fxp0: Ethernet address 08:00:46:0e:5a:c4 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci_cfgintr_unique: hard-routed to irq 9 pci_cfgintr: 0:12 INTA routed to irq 9 pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0 pcic0: Memory mapped device, will work. pcic0: PCI Memory allocated: 0x44000000 pccard0: <PC Card bus (classic)> on pcic0 acpi_ec0: <embedded controller> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_acad0: Off Line acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0 npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0F13> can't assign resources pcic0: Event mask 0x9 ad0: 14403MB <HITACHI_DK23BA-15> [29264/16/63] at ata0-master UDMA33 pccard: card inserted, slot 0 pcic0: Event mask 0x9 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error Mounting root from ufs:/dev/ad0s2a lock order reversal 1st 0xc04c30e0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:1007 2nd 0xc8a76c8c vnode interlock @ ../../ufs/ffs/ffs_vfsops.c:1016 sio2 at port 0x2f8-0x2ff irq 9 slot 0 on pccard0 sio2: type 16550A kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode fault virtual address = 0xc42efac0 fault code = supervisor read, page not present instruction pointer = 0x8:0xc03b6e08 stack pointer = 0x10:0xc8a7fb28 frame pointer = 0x10:0xc8a7fb34 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 179 (pccardd) Hope this helps, Haro =------------------------------------------------------------------------------ _ _ Munehiro (haro) Matsuda -|- /_\ |_|_| Business Incubation Dept., Kubota Corp. /|\ |_| |_|_| 1-3 Nihonbashi-Muromachi 3-Chome Chuo-ku Tokyo 103-8310, Japan Tel: +81-3-3245-3318 Fax: +81-3-3245-3315 Email: haro@kubota.co.jp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010620012436A.haro>