Date: Tue, 24 Feb 2015 22:08:45 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 191348] [mps] LSI2308 with WD3000FYYZ drives disappears after hotswapping Message-ID: <bug-191348-8-LHhA6rW6uB@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-191348-8@https.bugs.freebsd.org/bugzilla/> References: <bug-191348-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191348 --- Comment #16 from commit-hook@freebsd.org --- A commit references this bug: Author: slm Date: Tue Feb 24 22:07:48 UTC 2015 New revision: 279253 URL: https://svnweb.freebsd.org/changeset/base/279253 Log: - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks Changes: head/sys/dev/mps/mpi/mpi2.h head/sys/dev/mps/mpi/mpi2_cnfg.h head/sys/dev/mps/mpi/mpi2_hbd.h head/sys/dev/mps/mpi/mpi2_history.txt head/sys/dev/mps/mpi/mpi2_init.h head/sys/dev/mps/mpi/mpi2_ioc.h head/sys/dev/mps/mpi/mpi2_ra.h head/sys/dev/mps/mpi/mpi2_raid.h head/sys/dev/mps/mpi/mpi2_sas.h head/sys/dev/mps/mpi/mpi2_targ.h head/sys/dev/mps/mpi/mpi2_tool.h head/sys/dev/mps/mpi/mpi2_type.h head/sys/dev/mps/mps.c head/sys/dev/mps/mps_config.c head/sys/dev/mps/mps_ioctl.h head/sys/dev/mps/mps_mapping.c head/sys/dev/mps/mps_mapping.h head/sys/dev/mps/mps_pci.c head/sys/dev/mps/mps_sas.c head/sys/dev/mps/mps_sas.h head/sys/dev/mps/mps_sas_lsi.c head/sys/dev/mps/mps_user.c head/sys/dev/mps/mpsvar.h -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-191348-8-LHhA6rW6uB>