Date: Wed, 20 May 2015 19:20:33 +0200 From: Johann <jhugo.meraka@gmail.com> To: freebsd-wireless@freebsd.org Subject: Re: hostapd + freeradius can't connect Message-ID: <555CC261.8080505@gmail.com> In-Reply-To: <555CB658.6040103@gmail.com> References: <01e701d08d75$fed02bd0$fc708370$@gmail.com> <CAJ-VmokxL6Zz=K2p9zeg84_EF5zr6Kk4mWv=oxt2FA59JktA0w@mail.gmail.com> <003c01d08dbe$6018b900$204a2b00$@gmail.com> <CAJ-Vmo=anQCxvHq1jCR9bNk2OCjfye5gV_74jeWcr%2BOdBd1WWw@mail.gmail.com> <555CB658.6040103@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2015/05/20 06:29 PM, Johann wrote: > On 2015/05/16 08:03 AM, Adrian Chadd wrote: >> Hi, >> Has this ever worked? > > Yes. > > I got it working in April 2012 on FreeBSD 8 and 9. I've used a > FreeRadius server and a FreeBSD client with wpa_supplicant to test it. > > At that stage you had to enable the eap_server when you compile hostapd > > # echo HOSTAPD_CFLAGS+=-DEAP_SERVER >> /etc/src.conf > # cd /usr/src/usr.sbin/wpa/hostapd > # make > # make install > > but Bernhard Schmidt fixed it so that EAP_SERVER was enabled by default. > > > Here is the configs that I used: > > rc.conf > hostname="AP-vlan" > wlans_ath0="wlan0" > create_args_wlan0="wlanmode hostap country ZA" > ifconfig_wlan0="146.64.5.5/24 mode 11g channel 6" > defaultrouter="146.64.5.1" > hostapd_enable="YES" > cloned_interfaces="bridge0" > ifconfig_bridge0="addm sis0 addm wlan0 up" > ifconfig_sis0="up" > > > hostapd.conf > interface=wlan0 > ctrl_interface=/var/run/hostapd > ctrl_interface_group=wheel > ssid=testAP > hw_mode=g > channel=6 > > wpa=1 > wpa_pairwise=CCMP TKIP > wpa_key_mgmt=WPA-EAP > wpa_pairwise=TKIP CCMP > rsn_pairwise=CCMP > > Hope it helps > > Regards > Johann > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to > "freebsd-wireless-unsubscribe@freebsd.org" > Looks like this part of hostapd.conf got lost. ieee8021x=1 own_ip_addr=146.64.5.5 auth_server_addr=146.64.8.25 auth_server_port=1812 auth_server_shared_secret=same-as-on-freeradius Johann
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?555CC261.8080505>