Date: Fri, 12 Jul 2002 13:58:55 +0300 From: Vitaly Markitantov <vm@dics.com.ua> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-mobile@freebsd.org Subject: Re: New Media Corporation LiveWire 10/100 PCCARD Message-ID: <20020712105855.GA11707@iron.del.local> In-Reply-To: <20020711.101804.124551806.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jul 11, 2002 at 10:18:04AM -0600, M. Warner Losh wrote:
> In message: <20020711081324.GA85993@iron.del.local>
> Vitaly Markitantov <vm@dics.com.ua> writes:
> : This card is present in /etc/defaults/pccard.conf:
> : # New Media Corporation LiveWire 10/100
> : card "New Media Corporation" "LiveWire 10/100"
> : config auto "ed" ? 0x80000
> : insert /etc/pccard_ether $device start
> : remove /etc/pccard_ether $device stop
> :
> : but in doesn't works on 4.6-RELEASE - it says that card is CARDbus
> :
> : Ok. I know, CARDbus don't work on 4.6
> :
> : I build and install CURRENT with NEWCARD in kernel.
> : Now card is displayed in dmesg, but it assigns rl0 device.
> : I configured rl0 with ifconfig rl0 alias 172.16.0.9/27
> : But when i try to send somewhat (ssh some_host, ping some_host) - it dont works.
> : It says rl0: watchdog timeout
> :
> : So, can i bring this PCCARD to work? Or what i can do?
>
> Sounds like we're not routing interrupts correctly on your laptop.
>
> Warner
And what can i do with this?
Btw, i don't use pccardd at all - it don't works with NEWCARD.
--
Vitaly Markitantov mailto: vm@dics.com.ua
icq: 117438950 phone: (062)332-23-90
P.S. There is dmesg from my notebook.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Jul 11 21:24:16 EEST 2002
root@neo.del.local:/usr/obj/usr/src/sys/NEO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03b0000.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc03b00a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc03b0154.
Calibrating clock(s) ... TSC clock: 334124046 Hz, i8254 clock: 1193300 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 334092587 Hz
CPU: AMD-K6(tm) 3D processor (334.09-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 64M bytes
Write Allocate 15-16M bytes: Disable
Hardware Write Allocate Control: Disable
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003d7000 - 0x03ff7fff, 63049728 bytes (15393 pages)
avail memory = 61100032 (59668K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7340
bios32: Entry = 0xfd810 (c00fd810) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd810+0x203
pnpbios: Found PnP BIOS data at 0xc00f7370
pnpbios: Entry = f0000:a644 Rev = 1.0
Other BIOS signatures found:
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
VESA: information block
56 45 53 41 00 02 56 77 00 c0 00 00 00 00 22 00
00 01 40 00 00 01 d9 6f 00 c0 ea 6f 00 c0 f2 6f
00 c0 2e 01 31 01 41 01 0d 01 32 01 51 01 42 01
52 01 02 01 00 01 01 01 04 01 03 01 10 02 10 01
VESA: 30 mode(s) found
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc0320ea2 (1000022)
VESA: S3 Incorporated. M5 BIOS
VESA: S3 Incorporated. VBE 2.0 Rev 1.1
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Using $PIR table, 3 entries at 0xc00fdf90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fcd0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000fce0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 1, range 32, base f8000000, size 26, enabled
found-> vendor=0x5333, dev=0x8c03, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
powerspec 1 supports D0 D1 D3 current D0
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=3, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=03 ostat0=50 ostat2=d0
ata1-master: ATAPI 14 eb
ata1: mask=01 stat0=10 stat1=eb
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 1.2 (no driver attached)
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 1.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <display, VGA> at device 2.0 (no driver attached)
pccbb0: <TI1250 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:3 INTA routed to irq 11
pccbb1: <TI1250 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:3 INTB routed to irq 11
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
YMH0021: start dependent (0)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x1
YMH0021: adding dma mask 0x2
YMH0021: start dependent (1)
YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10
YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea0
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: start dependent (2)
YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x3ff, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea8
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: end dependent
pnpbios: 15 devices, largest 126 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfff88000-0xfffbffff, size=0x38000
PNP0c02: adding fixed memory32 range 0xfffc8000-0xfffeffff, size=0x28000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 15 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 21 device ID PNP0700 (0007d041)
pnpbios: handle 22 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x21 0x21 0x21 0x21
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
pcm0: <Yamaha OPL-SAx> at port 0x370-0x371,0x330-0x331,0x388-0x38f,0x530-0x537,0x220-0x22f irq 5 drq 1,0 on isa0
Yamaha: ver 0x21 DMA config 0x8c
pcm0: sndbuf_setmap 461000, 1000; 0xc5fea000 -> 461000
pcm0: sndbuf_setmap 462000, 1000; 0xc5feb000 -> 462000
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x2180-0x218f,0x8000-0x803f,0x4d0-0x4d1 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0e03> failed to probe on isa0
BIOS Geometries:
0:022def3f 0..557=558 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: lo0 attached
pccbb0: bad Vcc request. ctrl=0x33, status=0x30000a20
pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
found-> vendor=0x10ec, dev=0x8138, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
cardbus0: Expecting link target, got 0xc
cardbus0: Resource not specified in CIS: id=10, size=100
cardbus0: Resource not specified in CIS: id=14, size=200
rl0: <RealTek 8139 10/100BaseTX CardBus> port 0x1000-0x10ff mem 0x84002000-0x840021ff irq 11 at device 0.0 on cardbus0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:a0:0c:90:90:06
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK4309MAT/G5.01 B> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1702B/1150> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 5125679, size 5125617 : OK
ad0s2: type 0xa5, start 5125680, end = 8452079, size 3326400 : OK
start_init: trying /sbin/init
splash: image decoder found: logo_saver
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020712105855.GA11707>