Date: Fri, 22 May 2009 13:40:00 +0900 From: Weongyo Jeong <weongyo.jeong@gmail.com> To: "Sam Fourman Jr." <sfourman@gmail.com> Cc: Lucius Windschuh <lwindschuh@googlemail.com>, freebsd-current@freebsd.org, Hans Petter Selasky <hselasky@c2i.net> Subject: Re: HEADSUP: uath(4) has been committed. Message-ID: <20090522044000.GC88745@weongyo.cdnetworks.kr> In-Reply-To: <11167f520905211148u34071232hbf95e45ca373708f@mail.gmail.com> References: <20090407022956.GA71377@weongyo.cdnetworks.kr> <4A0F419A.2020700@freebsd.org> <20090519050132.GE42412@weongyo.cdnetworks.kr> <200905190916.06460.hselasky@c2i.net> <90a5caac0905191127y5677bea9s827bb3d6a9f82176@mail.gmail.com> <11167f520905211148u34071232hbf95e45ca373708f@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 21, 2009 at 01:48:31PM -0500, Sam Fourman Jr. wrote: > I have a uath device the Engenius NUB-362-EXT, it will not attach to > the uath driver > it says ugen7.3: <Atheros Communications Inc> at usbus7 > > I should note that this device attaches in OpenBSD 4.x > I am running FreeBSD 8 -CURRENT as of 10 hours ago, I do not know the > usb2 equivalent of usbdevs -v > > I am confused as to why this device will not attach to uath, I have > the driver loaded with kldload if_uath > > I do not know if this will help, but here is output from OpenBSD 4.5 > after you plugin the device I get: > > uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2 > uath0 detached > uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2 > uath0: MAC/BBP AR5523, RF AR2112, address 00:02:6f:3d:66:58 > > usbdevs -v > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 addr 2: high speed, power 500 mA, config 1, AR5523(0x0001), > Atheros Communications Inc(0x0cf3), rev 0.01, iSerialNumber 1.0 > port 6 powered > port 7 powered > port 8 powered Did you try to upload the firmware using uathload(8) like as follow after loading if_uath module? # /usr/sbin/uathload -d /dev/ugen7.3 regards, Weongyo Jeong
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090522044000.GC88745>