Date: Sat, 4 Nov 2006 00:18:37 GMT From: John Birrell <jb@FreeBSD.org> To: Perforce Change Reviews <perforce@freebsd.org> Subject: PERFORCE change 109172 for review Message-ID: <200611040018.kA40Ibnv032641@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=109172 Change 109172 by jb@jb_freebsd8 on 2006/11/04 00:17:39 Reset to match current. Affected files ... .. //depot/projects/dtrace/src/sys/dev/em/README#5 edit Differences ... ==== //depot/projects/dtrace/src/sys/dev/em/README#5 (text+ko) ==== @@ -1,9 +1,8 @@ -//depot/projects/dtrace/src/sys/dev/em/README#2 - integrate change 100573 (text+ko) -$FreeBSD: src/sys/dev/em/README,v 1.12 2006/04/06 17:09:02 glebius Exp $ +$FreeBSD: src/sys/dev/em/README,v 1.13 2006/08/03 09:20:11 glebius Exp $ FreeBSD* Driver for the Intel(R) PRO/1000 Family of Adapters ============================================================ -January 4, 2006 +May 2, 2006 Contents @@ -23,8 +22,7 @@ ======== This file describes the FreeBSD* driver for the Intel(R) PRO/1000 Family of -Adapters. This driver has been developed for use with FreeBSD, Release 4.11 -and greater and Release 5.4. +Adapters. This driver has been developed for use with FreeBSD, Release 6.x. For questions related to hardware requirements, refer to the documentation supplied with your Intel PRO/1000 adapter. All hardware requirements listed @@ -46,7 +44,8 @@ NOTE: Mobile adapters are not fully supported. - +NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100 +support. Building and Installation ========================= @@ -93,14 +92,14 @@ cp Makefile.kernel /usr/src/sys/modules/em/Makefile - Edit the /usr/src/sys/conf/files.i386 file, and add the following lines only if + Edit the /usr/src/sys/conf/files file, and add the following lines only if they don't already exist: dev/em/if_em.c optional em dev/em/if_em_hw.c optional em - Remove the following lines from the /usr/src/sys/conf/files.i386 file, + Remove the following lines from the /usr/src/sys/conf/files file, if they exist: dev/em/if_em_fxhw.c optional em @@ -231,6 +230,13 @@ - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or loss of link. + - The following adapters do not support Jumbo Frames: + Intel(R) 82562V 10/100 Network Connection + Intel(R) 82566DM Gigabit Network Connection + Intel(R) 82566DC Gigabit Network Connection + Intel(R) 82566MM Gigabit Network Connection + Intel(R) 82566MC Gigabit Network Connection + VLANs -----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200611040018.kA40Ibnv032641>