Date: Fri, 10 Dec 2021 12:30:23 GMT From: Andriy Gapon <avg@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-branches@FreeBSD.org Subject: git: 0f048f199e69 - stable/13 - twsi: unify error handling, explicitly handle more conditions Message-ID: <202112101230.1BACUNsR064999@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch stable/13 has been updated by avg: URL: https://cgit.FreeBSD.org/src/commit/?id=0f048f199e69da73936665c72550a3a5fe8c4f1d commit 0f048f199e69da73936665c72550a3a5fe8c4f1d Author: Andriy Gapon <avg@FreeBSD.org> AuthorDate: 2021-11-26 07:44:30 +0000 Commit: Andriy Gapon <avg@FreeBSD.org> CommitDate: 2021-12-10 12:30:12 +0000 twsi: unify error handling, explicitly handle more conditions twsi_error() is a new function that stops the current transfer and sets up softc when an error condition is detected. TWSI_STATUS_DATA_WR_NACK, TWSI_STATUS_BUS_ERROR and TWSI_STATUS_ARBITRATION_LOST are now handled explicitly rather than via the catch-all unknown status. Also, twsi_intr() now calls wakeup() in a single place when the transfer is finished. (cherry picked from commit a4fe8922085dfc1e5e6a6bac73ccc738e373165f) --- sys/dev/iicbus/twsi/twsi.c | 46 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-) diff --git a/sys/dev/iicbus/twsi/twsi.c b/sys/dev/iicbus/twsi/twsi.c index 384e19e120b9..ecadfade04d9 100644 --- a/sys/dev/iicbus/twsi/twsi.c +++ b/sys/dev/iicbus/twsi/twsi.c @@ -543,6 +543,19 @@ twsi_transfer(device_t dev, struct iic_msg *msgs, uint32_t nmsgs) return (error); } +static void +twsi_error(struct twsi_softc *sc, int err) +{ + /* + * Must send stop condition to abort the current transfer. + */ + debugf(sc, "Sending STOP condition for error %d\n", err); + sc->transfer = 0; + sc->error = err; + sc->control_val = 0; + TWSI_WRITE(sc, sc->reg_control, sc->control_val | TWSI_CONTROL_STOP); +} + static void twsi_intr(void *arg) { @@ -604,13 +617,13 @@ twsi_intr(void *arg) case TWSI_STATUS_ADDR_W_NACK: case TWSI_STATUS_ADDR_R_NACK: - debugf(sc, "No ack received after transmitting the address\n"); - sc->transfer = 0; - sc->error = IIC_ENOACK; - sc->control_val = 0; - wakeup(sc); + debugf(sc, "Address NACK-ed\n"); + twsi_error(sc, IIC_ENOACK); + break; + case TWSI_STATUS_DATA_WR_NACK: + debugf(sc, "Data byte NACK-ed\n"); + twsi_error(sc, IIC_ENOACK); break; - case TWSI_STATUS_DATA_WR_ACK: debugf(sc, "Ack received after transmitting data\n"); if (sc->sent_bytes == sc->msgs[sc->msg_idx].len) { @@ -684,12 +697,17 @@ twsi_intr(void *arg) sc->error = 0; break; + case TWSI_STATUS_BUS_ERROR: + debugf(sc, "Bus error\n"); + twsi_error(sc, IIC_EBUSERR); + break; + case TWSI_STATUS_ARBITRATION_LOST: + debugf(sc, "Arbitration lost\n"); + twsi_error(sc, IIC_EBUSBSY); + break; default: - debugf(sc, "status=%x hot handled\n", status); - sc->transfer = 0; - sc->error = IIC_EBUSERR; - sc->control_val = 0; - wakeup(sc); + debugf(sc, "unexpected status 0x%x\n", status); + twsi_error(sc, IIC_ESTATUS); break; } debugf(sc, "Refresh reg_control\n"); @@ -701,11 +719,11 @@ end: TWSI_WRITE(sc, sc->reg_control, sc->control_val | (sc->iflag_w1c ? TWSI_CONTROL_IFLG : 0)); - debugf(sc, "Done with interrupts\n\n"); - if (transfer_done == 1) { + if (transfer_done == 1) sc->transfer = 0; + debugf(sc, "Done with interrupt, transfer = %d\n", sc->transfer); + if (sc->transfer == 0) wakeup(sc); - } mtx_unlock(&sc->mutex); }
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202112101230.1BACUNsR064999>