Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Sep 2012 13:21:06 +0200
From:      Quentin SCHWERKOLT <develloper.unix@hotmail.fr>
To:        Arkadiy Dudevich <dudevitch@englerllc.com>, "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org>
Subject:   RE: Laptop battery status on FreeBSD9
Message-ID:  <BAY002-W15057A21BA44FEDB061B24D84910@phx.gbl>
In-Reply-To: <201209131321.53472.dudevitch@englerllc.com>
References:  <201209131321.53472.dudevitch@englerllc.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi=2C

My HP EliteBook 8540p running FreeBSD 9.1-PRERELEASE has a not dischargeabl=
e battery too. =3B-)
Some time=2C acpi is working fine (there is about 3 weeks for the last time=
)=2C the data provided by acpiconf was reactualized and the kernel said whe=
n ac power was plugged/unplugged.
Currently the kernel said only when I unplug ac power and lid status.

Cordially.
Q. Schwerkolt

> From: dudevitch@englerllc.com
> To: freebsd-acpi@freebsd.org
> Date: Thu=2C 13 Sep 2012 13:21:53 +0300
> Subject: Laptop battery status on FreeBSD9
>=20
> Good day=2C
> Laptop HP 6720S. Battery status is updated only at the time of reboot.
> # uname -a
> FreeBSD ark 9.1-RC1 FreeBSD 9.1-RC1 #0 r240390: Wed Sep 12 17:16:19 EEST =
2012=20
> amd64
> At the 9th release was the same. Tried to load FreeBSD7 with USB drive.=20
> Everything is normal.
> I specifically checked. Cut off the AC adapter for an hour.
> Indications apm-l && acpiconf-i 0 unchanged.
>=20
> With AC supply:
> # acpiconf -i 0
> Design capacity:        4638 mAh
> Last full capacity:     4638 mAh
> Technology:             secondary (rechargeable)
> Design voltage:         10800 mV
> Capacity (warn):        232 mAh
> Capacity (low):         47 mAh
> Low/warn granularity:   100 mAh
> Warn/full granularity:  100 mAh
> Model number:           Primary
> Serial number:          03554 2012/02/17
> Type:                   LIon
> OEM info:               Hewlett-Packard
> State:                  high=20
> Remaining capacity:     95%
> Remaining time:         unknown
> Present rate:           1291 mA (15874 mW)
> Present voltage:        12296 mV
>=20
> Without AC supply(after 20 min):
> acpiconf -i 0
> Design capacity:        4638 mAh
> Last full capacity:     4638 mAh
> Technology:             secondary (rechargeable)
> Design voltage:         10800 mV
> Capacity (warn):        232 mAh
> Capacity (low):         47 mAh
> Low/warn granularity:   100 mAh
> Warn/full granularity:  100 mAh
> Model number:           Primary
> Serial number:          03554 2012/02/17
> Type:                   LIon
> OEM info:               Hewlett-Packard
> State:                  high=20
> Remaining capacity:     95%
> Remaining time:         unknown
> Present rate:           1291 mA (15874 mW)
> Present voltage:        12296 mV
>=20
> What information is needed?
> --=20
> Best regards=2C
>   Arkadiy Dudevich=2C
>   ENGLER UKRAINE LLC
>   mailto: dudevitch@englerllc.com
> _______________________________________________
> freebsd-acpi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
> To unsubscribe=2C send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
 		 	   		  =



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY002-W15057A21BA44FEDB061B24D84910>