Date: Thu, 23 Sep 2004 20:11:49 +0200 From: Oliver Lehmann <lehmann@ans-netz.de> To: freebsd-current@freebsd.org Subject: 5.3-BETA4: System halts with mlx and de @same IRQ Message-ID: <20040923201149.52d4ab83.lehmann@ans-netz.de>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hi, I've and ANA-6944A/TX and a Mylex 960DAC. mlx and some of the de's ar both on irq 10. When I plug the cable out of one of the deX ports, and back in an other port, the system freezes. It only happens with taking cable out. I'm actually working through 2 of 4 ports, plugging on of them out... freeze. I've no experience with other FreeBSD versions because I own that card since today... (written from screen) de3: link down: cable problem mlx0: controller wedged (not taking commands) mlx0: I/O error unknown response: 0xdead for command 0x83 mlx0: controller wedged (not taking commands) mlx0: I/O error unknown response: 0xdead for command 0x83 mlx0: controller wedged (not taking commands) mlx0: I/O error unknown response: 0xdead for command 0x83 It's of course reproduceable. Please find dmesg attached. I'll go and build an kernel with debugging stuff on... but the system doesn't panic, so I've no idea what I can do for more debugging, do you? -- Oliver Lehmann http://www.pofo.de/ http://wishlist.ans-netz.de/ [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA4 #1: Sat Sep 18 12:33:21 CEST 2004 root@gurke.salatschuessel.net:/usr/obj/i386-5.3/usr/src/sys/GURKE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 66977792 (63 MB) avail memory = 60108800 (57 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <OEMTYN OEMTYNTB> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 440 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped 400 pci0: <network> at device 16.0 (no driver attached) mlx0: <Mylex version 2 RAID interface> port 0xec00-0xec7f mem 0xffafff80-0xffafffff irq 10 at device 17.0 on pci0 mlx0: [GIANT-LOCKED] mlx0: DAC960P/PD, 2 channels, firmware 2.73-0-00, 16MB RAM mlxd0: <Mylex System Drive> on mlx0 mlxd0: 2150MB (4403200 sectors) RAID 1 (online) pcib2: <PCI-PCI bridge> at device 18.0 on pci0 pci2: <PCI bus> on pcib2 de0: <Digital 21140A Fast Ethernet> port 0xcc00-0xcc7f mem 0xff4fff80-0xff4fffff irq 10 at device 4.0 on pci2 de0: [GIANT-LOCKED] de0: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de0: Ethernet address: 00:00:d1:1f:e3:a1 de0: if_start running deferred for Giant de1: <Digital 21140A Fast Ethernet> port 0xc880-0xc8ff mem 0xff4fff00-0xff4fff7f irq 9 at device 5.0 on pci2 de1: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de1: Ethernet address: 00:00:d1:1f:e3:a2 de1: if_start running deferred for Giant de2: <Digital 21140A Fast Ethernet> port 0xc800-0xc87f mem 0xff4ffe80-0xff4ffeff irq 5 at device 6.0 on pci2 de2: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de2: Ethernet address: 00:00:d1:1f:e3:a3 de2: if_start running deferred for Giant de3: <Digital 21140A Fast Ethernet> port 0xc480-0xc4ff mem 0xff4ffe00-0xff4ffe7f irq 10 at device 7.0 on pci2 de3: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de3: Ethernet address: 00:00:d1:1f:e3:a4 de3: if_start running deferred for Giant pcib3: <PCI-PCI bridge> at device 19.0 on pci0 pci3: <PCI bus> on pcib3 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xff800000-0xff8fffff,0xff9ff000-0xff9fffff irq 9 at device 4.0 on pci3 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:50:8b:e3:3f:60 fxp1: <Intel 82559 Pro/100 Ethernet> port 0xde80-0xdebf mem 0xff700000-0xff7fffff,0xff9fe000-0xff9fefff irq 5 at device 5.0 on pci3 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:50:8b:e3:3f:61 acpi_button0: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fdc0: cmd 3 failed at out byte 1 of 3 device_attach: fdc0 attach returned 6 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 pcfclock0: <PCF-1.0> on ppbus0 ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fdc0: cmd 3 failed at out byte 1 of 3 device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ep0: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x210-0x21f irq 11 on isa0 ep0: Ethernet address: 00:60:97:39:3a:76 ep1: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x220-0x22f irq 12 on isa0 ep1: Ethernet address: 00:a0:24:a2:66:bc Timecounter "TSC" frequency 300683069 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging unlimited acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% Mounting root from ufs:/dev/mlxd0s1a WARNING: / was not properly dismounted de0: enabling Full Duplex 100baseTX port de2: enabling Full Duplex 100baseTX port de1: enabling 10baseT port de1: link down: cable problem? de3: autosense failed: cable problem? fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040923201149.52d4ab83.lehmann>