Date: Tue, 7 Jul 2015 14:03:04 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Mike Brown <mike@skew.org> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: cpsw0: Failed to read from PHY (on BBB w/11.0-CURRENT) Message-ID: <CAB=2f8wWQHTH8kxC___vwUFiZ2Qs7upFpb97cJ-hXJC5f2_eCA@mail.gmail.com> In-Reply-To: <20150703234534.GA66208@chilled.skew.org> References: <20150703234534.GA66208@chilled.skew.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3 July 2015 at 20:45, Mike Brown wrote: > I'm trying to get FreeBSD working on my BeagleBone Black rev. C. > > 10.1-STABLE (20150617 snapshot) wouldn't boot; it couldn't mount rootfs. > http://pastebin.com/7dPQFGH2 is the console log if anyone cares. > > I asked on Freenode #freebsd-embedded and was told to try 11-CURRENT > for now. Well, 11-current boots, but I can't get networking going. > ifconfig only shows the lo0 device, no cpsw0. The boot messages said: > > cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 40,41,42,43 on simplebus0 > cpsw0: CPSW SS Version 1.12 (0) > cpsw0: Initial queue size TX=128 RX=384 > cpsw0: Failed to read from PHY. > cpsw0: attaching PHYs failed > device_attach: cpsw0 attach returned 6 > > I get the same result regardless of whether an ethernet cable is plugged in. > > Is this expected, or is something wrong on my end? > > Let me know if you need any more info. Thanks! Hi, About the cpsw failure on -current, I've seen that before, this still need to be tracked down. Usually you can fix this error with a cold boot (remove the power for a few seconds). This happen randomly at boot (I haven't yet found a reliable way to reproduce this). Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8wWQHTH8kxC___vwUFiZ2Qs7upFpb97cJ-hXJC5f2_eCA>