Date: Thu, 21 Aug 1997 13:51:55 -0500 (CDT) From: Glenn Johnson <glenn@srrc.usda.gov> To: freebsd-current@freebsd.org Subject: NCR SCSI will not boot Message-ID: <Pine.LNX.3.96.970821132915.124A-100000@Symbion.srrc.usda.gov>
next in thread | raw e-mail | index | archive | help
I can not boot my NCR SCSI equipped computer. I tried 3.0 snapshots of 8-7-97 and 8-15-97. In each case I get to the following point upon bootup: ncr0: <ncr 53c825a fast10 wide scsi> rev 0x11 int a irq 11 on pci0.14.0 ncr0: minsync=25, maxsync=206, maxoffs=8, 128 dwords burst, large dma fifo It then hangs at this point. I then tried a 2.2.2 release floppy and it booted fine. So it is just a problem on -current, which I need for SMP. Here is some hardware info: Motherboard: Tyan Titan Pro AT, dual 200-MHz PPro processors installed. SCSI board: ? S1365 Hard disk: Quantum XP34300W; Rev - L912 CD-ROM: Toshiba CD-ROM XM-3701TA; Rev - 0236 Is there an option that can be added to the kernel config to work around this? Thanks. Glenn Johnson USDA-ARS-SRRC Phone: (504) 286-4252 FAX: (504) 286-4217 gjohnson@nola.srrc.usda.gov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.970821132915.124A-100000>