Date: Tue, 7 Jan 2003 10:55:31 -0400 From: "Abel Alejandro" <aalejandro@icepr.com> To: <freebsd-hackers@freebsd.org> Subject: pst: timeout mfa=0x00328210 cmd=WRITE Message-ID: <000b01c2b65c$d2ff7a40$0ea00cc4@abel>
next in thread | raw e-mail | index | archive | help
Hello, I am getting this error like 5 or 10 times
then my box crashes. I have tried both 4.7-RC and
5.0-RC2 and both crash after having displayed this
message a few times.
This only happens with intensive I/O operations
like buildworld or rm -rf the ports.
My pst has a 1.10.0 (build 15) bios.
3 hard disks of 120gb and 128mb of ram (on the
promise controller).
Here is my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.7-RELEASE #1: Wed Jan 2 18:57:57 GMT 2002
root@test:/usr/src/sys/compile/config
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2806375696 Hz
CPU: Pentium 4 (2806.38-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>>
real memory = 268353536 (262064K bytes)
avail memory = 258662400 (252600K bytes)
Preloaded elf kernel "kernel" at 0xc02a6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f1790
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)>
at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0250 graphics accelerator> at 0.0
irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at
device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <NEC uPD 9210 USB controller> at 4.0 irq 7
pci2: <NEC uPD 9210 USB controller> at 4.1 irq 5
pci2: <USB controller> at 4.2 irq 9
pci2: <unknown card> (vendor=0x10b7, dev=0x9200) at
10.0 irq 5
pci2: <unknown card> (vendor=0x1102, dev=0x0004) at
11.0 irq 9
pci2: <unknown card> (vendor=0x1102, dev=0x7003) at
11.1
pci2: <unknown card> (vendor=0x1102, dev=0x4001) at
11.2 irq 3
pcib3: <PCI to PCI bridge (vendor=8086 device=0962)>
at device 14.0 on pci2
pci3: <PCI bus> on pcib3
pstpci0: <Promise SuperTrak SX6000 ATA RAID
controller> mem 0xee800000-0xeebfffff irq 10 at device
14.1 on pci2
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at
device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port
0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A>
at 31.2 irq 4
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B>
at 31.4 irq 9
orm0: <Option ROMs> at iomem
0xc0000-0xce7ff,0xd0000-0xd3fff,0xd4000-0xd7fff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ep0 at port 0x300 irq 10 on isa0
ep0: No irq?!
ep0: ep_alloc() failed! (6)
device_probe_and_attach: ep0 attach returned 6
ep1 at port 0x280 irq 5 on isa0
ep1: eeprom failed to come ready.
ep1: eeprom failed to come ready.
ep1: eeprom failed to come ready.
ep1: eeprom failed to come ready.
ep1: eeprom failed to come ready.
ep1: Ethernet address 00:00:00:00:00:00
ad1: 114473MB <WDC WD1200BB-22CAA0> [232581/16/63] at
ata0-slave UDMA100
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S
0122> at ata0-master PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at
ata1-master PIO4
pst0: 152638MB <PROMISE TECH. I2O RAID DEVICE>
[19458/255/63] on pstpci0
Mounting root from ufs:/dev/ad1s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c2b65c$d2ff7a40$0ea00cc4>