Date: Wed, 1 Oct 1997 10:52:03 -0500 (CDT) From: "Kent S. Gordon" <kgor@inetspace.com> To: jdp@polstra.com Cc: ache@nagual.pp.ru, asami@cs.berkeley.edu, current@FreeBSD.ORG Subject: Re: CVSup-15.2 is now available Message-ID: <199710011552.KAA28335@chess.inetspace.com> In-Reply-To: <199710010202.TAA06712@austin.polstra.com> (message from John Polstra on Tue, 30 Sep 1997 19:02:11 -0700)
next in thread | previous in thread | raw e-mail | index | archive | help
How much memory is required to compile CVSup? I am running a FreeBSD
2.2-STABLE system and I am getting the following message when trying to
compile CVSup using the ports collection. I was running X at the time
but 32MB of memory and 49MB of swap should be enough.
new source -> compiling ../src/trestle/Trestle.m3
Trestle.m3: In function `TrestleImpl__UpdateChalk':
Trestle.m3:930: virtual memory exhausted
Fatal Error: program "/usr/local/ports/lang/modula-3-lib/work/installed/lib/m3/FreeBSD2/m3cgc1" failed, exit status = 8448
My system has 32MB and the uname -a is as follows
FreeBSD chess.inetspace.com 2.2-STABLE FreeBSD 2.2-STABLE #0: Fri May 16 19:21:22 CDT 1997 kgor@chess.inetspace.com:/usr/src/sys/compile/CHESS i386
Here is the information from swapinfo on my swap space.
Device 512-blocks Used Avail Capacity Type
/dev/sd0b 49152 15760 33264 32% Interleaved
/dev/sd1b 49152 16080 32944 33% Interleaved
Total 98048 31840 66208 32%
The following is my configuration as reported using dmesg.
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2-STABLE #0: Fri May 16 19:21:22 CDT 1997
kgor@chess.inetspace.com:/usr/src/sys/compile/CHESS
CPU: i486DX (486-class CPU)
real memory = 33554432 (32768K bytes)
avail memory = 30670848 (29952K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:00:e8:cb:ac:1a, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
bt0: Bt445S/ 0-ISA(24bit) bus
bt0: Your card cannot DMA above 16MB boundary. Bounce buffering enabled.
bt0: reading board settings, dma=5, int=11
bt0: version 3.36, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 1 sync rate=10.00MB/s(100ns), offset=15
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 11 drq 5 on isa
(bt0:0:0): "DEC DSP5200S T392" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 1908MB (3907911 512 byte sectors)
(bt0:1:0): "SEAGATE ST31200N 8648" type 0 fixed SCSI 2
sd1(bt0:1:0): Direct-Access 1006MB (2061108 512 byte sectors)
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
arp: 206.50.163.16 moved from 00:00:86:16:20:77 to 00:a0:24:d3:a3:89
arp: 206.50.163.16 moved from 00:a0:24:d3:a3:89 to 00:00:86:16:20:77
arp: 206.50.163.16 moved from 00:00:86:16:20:77 to 00:a0:24:d3:a3:89
bt0: Try to abort
bt0: Try to abort
bt0: Try to abort
arp: 00:a0:c9:1f:c1:a2 is using my IP address 206.50.163.14!
pid 21453 (netscape.bin), uid 101: exited on signal 10
ed0: promiscuous mode enabled
arp: 206.50.163.13 moved from 00:a0:c9:1f:c1:a2 to 08:00:07:0f:8a:fc
swap_pager: out of swap space
swap_pager: out of swap space
swap_pager: out of swap space
Kent S. Gordon
Senior Software Engineer
iNetSpace Co.
voice: (972)851-3494 fax:(972)702-0384 e-mail:kgor@inetspace.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710011552.KAA28335>