Date: Fri, 9 Jan 2004 16:21:01 +0100 From: Dario Freni <saturnero@gufi.org> To: Arne Schwabe <arne@rfc2549.org> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Synaptics Touchpad xfree driver hack :) Message-ID: <20040109152101.GA94990@euclide.usr.dico.unimi.it> In-Reply-To: <86n097dco9.fsf@kamino.rfc1149.org> References: <86n097dco9.fsf@kamino.rfc1149.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--s/l3CgOIzMHHjg/5 Content-Type: multipart/mixed; boundary="2fHTh5uZTiUOsy+g" Content-Disposition: inline --2fHTh5uZTiUOsy+g Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Arne Schwabe (arne@rfc2549.org) wrote: > Rebuild your kernel and reboot. Check if my code recognized your > Touchpad: >=20 > Jan 1 12:41:29 kamino kernel: psm0: model Synaptics Touchpad, device ID = 0-00, 2 buttons Problems here, on my Dell Inspiron 5150 :/ Attached the dmesg.boot, let me know if I can help for testing Bye, Dario --=20 Dario Freni (saturnero@gufi.org) - SaturNero on IRCNet, Azzurra Gruppo Utenti FreeBSD Italia (http://www.gufi.org) GPG Public key at http://www.saturnero.net/saturnero.asc --2fHTh5uZTiUOsy+g Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Fri Jan 9 15:58:53 CET 2004 root@sberta.saturnero.sat:/usr/obj/usr/src/sys/SBERTA Preloaded elf kernel "/boot/kernel/kernel" at 0xc08c9000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08c9244. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08c92f0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08c939c. Table 'FACP' at 0xfff0400 Table 'APIC' at 0xfff0c00 MADT: Found table at 0xfff0c00 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <DELL CPi R > Calibrating clock(s) ... i8254 clock: 1193188 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3056500724 Hz CPU: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz (3056.50-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf29 Stepping =3D 9 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory =3D 268234752 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000000fb27fff, 250605568 bytes (61183 pages) avail memory =3D 252796928 (241 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xcf1e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) ioapic0: intpin 16 -> irq 16 (level, activelo) ioapic0: intpin 17 -> irq 17 (level, activelo) ioapic0: intpin 18 -> irq 18 (level, activelo) ioapic0: intpin 19 -> irq 19 (level, activelo) ioapic0: intpin 20 -> irq 20 (level, activelo) ioapic0: intpin 21 -> irq 21 (level, activelo) ioapic0: intpin 22 -> irq 22 (level, activelo) ioapic0: intpin 23 -> irq 23 (level, activelo) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: active-hi lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-hi lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: active-hi ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D35808086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fcb30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x65 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 4 B 0x60 none embedded 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu1: Failed to attach throttling P_CNT acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 map[10]: type 3, range 32, base e0000000, size 27, enabled found-> vendor=3D0x8086, dev=3D0x3580, revid=3D0x02 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3584, revid=3D0x02 bus=3D0, slot=3D0, func=3D1 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3585, revid=3D0x02 bus=3D0, slot=3D0, func=3D3 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3581, revid=3D0x02 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x01 bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D16 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x01 bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D19 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (source ) pcib0: device is hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x01 bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D18 map[10]: type 1, range 32, base f4fffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (source ) pcib0: device is hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x01 bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D23 powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x81 bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x8080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24cc, revid=3D0x01 bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=3D0x8086, dev=3D0x24ca, revid=3D0x01 bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[10]: type 4, range 32, base 0000b800, size 8, enabled map[14]: type 4, range 32, base 0000bc40, size 6, enabled map[18]: type 1, range 32, base f4fff800, size 9, enabled map[1c]: type 1, range 32, base f4fff400, size 8, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x24c5, revid=3D0x01 bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D17 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b400, size 8, enabled map[14]: type 4, range 32, base 0000b080, size 7, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x24c6, revid=3D0x01 bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D17 powerspec 2 supports D0 D3 current D0 agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at devic= e 0.0 on pci0 agp0: allocating GATT for aperture of size 68M pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xd0000000-0xdfffffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 map[10]: type 1, range 32, base fc000000, size 24, enabled map[14]: type 3, range 32, base d0000000, size 28, enabled pcib1: matched entry for 1.0.INTA (source ) pcib1: device is hardwired to IRQ 20 found-> vendor=3D0x10de, dev=3D0x0324, revid=3D0xa1 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0027, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns) intpin=3Da, irq=3D20 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 1= 6 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 1= 9 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 1= 8 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 23= at device 29.7 on pci0 ehci0: (New EHCI DeviceId=3D0x24cd8086) ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xefff pcib2: memory decode 0xf6000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=3D2 map[10]: type 1, range 32, base faffe000, size 13, enabled pcib2: matched entry for 2.1.INTA (source ) pcib2: device is hardwired to IRQ 17 found-> vendor=3D0x14e4, dev=3D0x4401, revid=3D0x01 bus=3D2, slot=3D1, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D17 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=3D0x104c, dev=3D0xac44, revid=3D0x02 bus=3D2, slot=3D4, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffd800, size 11, enabled map[14]: type 1, range 32, base faff8000, size 14, enabled pcib2: matched entry for 2.4.INTA (source ) pcib2: device is hardwired to IRQ 16 found-> vendor=3D0x104c, dev=3D0x8029, revid=3D0x00 bus=3D2, slot=3D4, func=3D1 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D16 powerspec 2 supports D0 D1 D2 D3 current D0 bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 17 at = device 1.0 on pci2 pcib2: device bfe0 requested decoded memory range 0xfaffe000-0xfaffffff bfe0: Ethernet address: 00:0d:56:ac:48:83 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xf6000000-0xfbffffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.4.INTA (source ) pcib2: device is hardwired to IRQ 16 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac44104c 0x02100007 0x06070002 0x00822008=20 0x10: 0xf6000000 0x020000a0 0x20000000 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400110=20 0x40: 0x015f1028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x28407061 0x00000000 0x001f0000 0x00001002=20 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: vendor=3D104c, dev=3D8029 fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0x= faffd800-0xfaffdfff irq 16 at device 4.1 on pci2 fwohci0: latency timer 32 -> 32. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xfaffd800-0xfaffdfff fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 32:4f:c0:00:20:a5:74:10 fwohci0: resetting OHCI...done (loop=3D0) fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x3 loop=3D0, retry=3D0 fwohci0: Phy 1394a available .\M-Cq\M-@4\M-Cq\M-@:\M-Cq\M-@(\M-Cq\M-@?\M-Cq= \M-@E\M-Cq\M-@K\M-Cq\M-@Q\M-Cq\M-@W\M-Cq\M-@\\\M-Cq\M-@\M^U\M-kr\M-@a\M-Cq\= M-@(\M-Cq\M-@(\M-Cq\M-@\^O\M-rq\M-@(\M-Cq\M-@\^E, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: Link .\M-Cq\M-@4\M-Cq\M-@:\M-Cq\M-@(\M-Cq\M-@?\M-Cq\M-@E\M-Cq\M-@K= \M-Cq\M-@Q\M-Cq\M-@W\M-Cq\M-@\\\M-Cq\M-@\M^U\M-kr\M-@a\M-Cq\M-@(\M-Cq\M-@(\= M-Cq\M-@\^O\M-rq\M-@(\M-Cq\M-@\^E, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 32:4f:c0:a5:74:10 fwe0: bpf attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=3D1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=3D0) firewire0: bus manager 0 (me) send phy_config root_node=3D-1 gap_count=3D5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=3D0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x1= 70-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01 ata0-master: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0-slave: stat=3D0x01 err=3D0x04 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 mask=3D03 stat0=3D10 stat1=3D01 devices=3D0x4<ATAPI_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff40= 0-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 17 at device 31.5 on pci0 pcm0: <SigmaTel STAC9750/51 AC97 Codec (id =3D 0x83847650)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume= , SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 2b6000, 4000; 0xd65d7000 -> 2b6000 pcm0: sndbuf_setmap 2d6000, 4000; 0xd65db000 -> 2d6000 pci0: <simple comms> at device 31.6 (no driver attached) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on ac= pi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: the aux port is not functioning (-1). ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 3056500724 Hz quality -100 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default t= o accept, logging unlimited IPsec: Initialized Security Association Processing. lo0: bpf attached Current DB 0 ch =3D 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 002d1000 OUTL ST2 ALL ALL 12 00000000 002d1080 8411:000d RUN,ACTIVE, ack= complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA pccard0: Manufacturer code 0xb, product 0x7300 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask = 6, iospace 0-3f; io16 irqpulse irqlevel pcib2: device pccard0 requested decoded I/O range 0x100-0xffffffff pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff wi0: <NETGEAR MA401RA Wireless PC Card> at port 0x100-0x13f irq 16 function= 0 config 1 on pccard0 pcib2: device wi0 requested decoded I/O range 0x100-0x13f pcib2: device pccard0 requested decoded I/O range 0x100-0x13f pcib2: device wi0 requested decoded I/O range 0x100-0x13f wi0: 802.11 address: 00:09:5b:55:35:ed wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached bus_explore done sbp_post_explore (sbp_cold=3D2) ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin ata0-master: setting PIO4 on Intel ICH4 chip acd0: <SAMSUNG CDRW/DVD SN-324F/U203> CDRW drive at ata0 as master acd0: read 345KB/s (4126KB/s) write 172KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting UDMA100 on Intel ICH4 chip GEOM: create disk ad2 dp=3D0xc2d4f660 ad2: <FUJITSU MHT2030AT/009B> ATA-6 disk at ata1-master ad2: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad2 ar: FreeBSD check1 failed pcm0: measured ac97 link rate at 48000 Hz [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:28916937 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:28917000 l:29688120 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 14805471744 end 14805503999 GEOM: Configure ad2s2, start 14805504000 length 15200317440 end 30005821439 GEOM: Configure ad2s2a, start 513802240 length 14686515200 end 15200317439 GEOM: Configure ad2s2b, start 0 length 513802240 end 513802239 GEOM: Configure ad2s2c, start 0 length 15200317440 end 15200317439 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (IRQ 1) to cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 9 (IRQ 9) to cluster 0 ioapic0: routing intpin 13 (IRQ 13) to cluster 0 ioapic0: routing intpin 14 (IRQ 14) to cluster 0 ioapic0: routing intpin 15 (IRQ 15) to cluster 0 ioapic0: routing intpin 16 (IRQ 16) to cluster 0 ioapic0: routing intpin 17 (IRQ 17) to cluster 0 ioapic0: routing intpin 18 (IRQ 18) to cluster 0 ioapic0: routing intpin 19 (IRQ 19) to cluster 0 ioapic0: routing intpin 23 (IRQ 23) to cluster 0 Mounting root from ufs:/dev/ad2s2a start_init: trying /sbin/init --2fHTh5uZTiUOsy+g-- --s/l3CgOIzMHHjg/5 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (FreeBSD) iD8DBQE//sbcZ1XqWj1OqUERAqz/AJ90u6igKuTJ7g0Aog2oZg+HNcn6EACgltn3 plPsP8xT2N4YpsZ7U4YfmGg= =mjlr -----END PGP SIGNATURE----- --s/l3CgOIzMHHjg/5--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040109152101.GA94990>