Date: Thu, 9 May 2002 09:23:10 +0200 From: Rado Keves <rado@studnet.sk> To: FreeBSD-chat@FreeBSD.org Subject: problem with quota Message-ID: <20020509092310.A27369@studnet.sk>
next in thread | raw e-mail | index | archive | help
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I add quotas for new filesystem with handbook's help ..... reboot ... and my server going to be very bad and have not response after I start edquota -u username.
When I reboot to single mode and disable quotas and reboot, server was going only on IPv6 (no IPv4) and I don't know why.
I have GENERIC kernel with this changes:
options QUOTA
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/IPSEC)
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=10
dmesg as a attach file
if can someone tell me what to do to please help because now I'm working without quotas ;-(
--
--------------
have a nice day ;-)
Rado Keves rado@studnet.sk
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE-p4 #0: Thu May 9 03:54:26 CEST 2002
root@kripel:/usr/src/sys/compile/angel
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (927.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268435456 (262144K bytes)
avail memory = 256212992 (250208K bytes)
Preloaded elf kernel "kernel" at 0xc04e0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00ede90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <DEC 21152 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xb1000000-0xb10fffff,0xb1100000-0xb1100fff irq 11 at device 5.0 on pci1
fxp0: Ethernet address 00:50:8b:e9:e8:92
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <ATI Mach64-GR graphics accelerator> at 6.0 irq 5
pci1: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 7.0 irq 5
atapci0: <CMD 649 ATA100 controller> port 0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device 8.0 on pci1
ata2: at 0x1850 on atapci0
ata3: at 0x1858 on atapci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb1500000-0xb150007f irq 11 at device 4.0 on pci0
xl0: Ethernet address: 00:04:76:9d:0c:cd
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 ATA33 controller> port 0x2080-0x208f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xb1400000-0xb1400fff irq 5 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib5
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff,0xd0000-0xd07ff,0xd2000-0xdcfff,0xe8000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
ad4: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-master UDMA100
ad5: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-slave UDMA100
acd0: CDROM <Compaq CRD-8402B> at ata0-master using PIO4
Mounting root from ufs:/dev/ad4s1a
--d6Gm4EdcadzBjdND--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-chat" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020509092310.A27369>